Table of Contents
Advertisement
Color
Game Assistant
Modes
Gaming
Color Space
Picture
Grauscale Mode
Color
Gamma
Audio
Color Temp.
0SD
6-axis Hue
System
6-axis Saturate
Move
Enter
Back
Game Assistant
Modes
Gaming
Color Space
Picture
Grauscale Mode
Color
Gamma
Audio
Color Temp.
0SD
6-axis Hue
System
6-axis Saturate
Move
Enter
Back
1.
Press the MENU key to open the OSD.
2.
Toggle the joystick to the up or down to select Color from the OSD.Then toggle to the
right to
to the function you.
3.
Toggle to the left or right to adjust the sliding scales or choose functions.
4.
The Color Page can be used to adjust the Gamma, Color Temp., Modes, Color Space,
Gamma, Grayscale Mode, 6-axis Hue, 6-axis Saturate.
5.
Modes: Open Modes Hot Key Menu. Detail rules please refer Modes Spec.
•
Action: For better color matching representation with the Action game or
movie,Users can modify some parameters and save them by themselves.
•
Racing: For better color matching representation with the Racing game or
movie,Users can modify some parameters and save them by themselves.
•
Sports: For better color matching representation with the Sports game or movie,
Users can modify some parameters and save them by themselves.
•
User: Applies a combination of picture settings defined by users. Standard: For
basic PC application (Default Setting).
•
Standard: For basic PC application (Default Setting).
•
ECO: For saving electricity with low power consumption by providing minimum
brightness for all running programs.
•
Graphics: For better color matching representation with the graphics.
•
HDR: For better color matching representation with the high dynamic lighting
rendering (HDR).
1366x768
60
HDMI 1
Off
User
Mode
Resolution
Hz
Input
FreeSync
1366x768
60
HDMI 1
Off
User
Mode
Resolution
Hz
Input
FreeSync
sRGB
Rec.709
HDR
DCI
SMPTE-C
General
wish to adjust and press the joystick to enter it.
------------------------------------------------------------------------------------------
Note: In HDR mode, some function item is gray out and parameters
are fixed not open to modify:
1. The signal content is SDR, the brightness can to adjustment,
but content is HDR the brightness is fixed at 100 and gray
out.
2. Users can adjustment (Brightness (SDR), Aim Point,
Advanced Over Drive, Refresh Rate Num and Super
Sharpness).
3. If to adjust the parameter or be saved the Modes will not
jump to User mode.
4. 6-axis (Hue & Saturate) are gray out and can't adjustment.
Advertisement
Table of Contents
