Recording on an Audio Tape
POWER -+ ON
VCR
1
Turn on the receiver and the equipment to be
used.
1
Turn on the receiver and the equipment to be
used.
2
Select the desired program source.
3
For an FM/AM broadcast, tune in the desired
station.
2
Insert the recorded tape into deck connected to
the TAPE jacks.
3
Insert a blank tape into the tape deck connected
to the TAPE MONITOR jacks and adjust the
recording level.
4
Set the tape deck in the recording mode.
4
Press TAPE.
5
Start the desired program source.
5
Start the playback of the tape deck for
playback.
To monitor recorded sound while recording
if a tape recorder with three-head system is connected to
TAPE MONITOR jacks, recorded sound can be monitored.
6
Set the tape deck for recording in the recording
Select recording tape recorder using the TAPE MONITOR
mode.
button. The recorded sound is immediately fed back to the
amplifier and output to the speakers.
Note on recording
The setting of the volume, BASS, TREBLE, and BALANCE controls
do not have any effect on recording.
16
phe
ee
Se
EER
A
ENG
A
te
a
Ta ta -pte
ce fadecemees
ve ree
eee