Table of Contents
Advertisement
Digital Output Audio Delay
•
Adjust the output delay time for digital audio.
This feature is only available when the external device is connected via HDMI (eARC), HDMI (ARC) and SPDIF (Sony
Philips Digital Interface).
This function may not be supported depending on the model.
•
Dolby Atmos
Try Now
Set to
On
if the audio device connected via the HDMI (eARC) port supports Dolby Atmos. When the option is
set to On, Dolby Digital+ with Atmos stream, sent from an external device, can be received. If you change the
setting when the input source is set to HDMI, the screen may flicker. If this function is on, set
Audio Format
to Auto.
When watching TV using the embedded speakers, the virtual surround sound effect of Dolby Atmos can be
turned on or off. If the TV has been installed in portrait mode by using separate accessories, the virtual surround
sound effect through the TV speakers does not work.
This function may not be supported depending on the model.
•
Auto Volume
Try Now
Automatically adjusts the sound to a certain level when changing channels or switching to another external
input.
•
Sound Feedback
Try Now
Plays the notification sound when manipulating a menu or selecting an option.
•
Simultaneous Optical Output
The device connected via optical always outputs sound.
•
Reset Sound
Try Now
Reset changed sound settings.
Standard audio signals are sampled at 48 kHz while HD audio signals are sampled at 96 kHz.
Some SPDIF receivers may not be compatible with HD audio format.
Try Now
- 144 -
Digital Output
- Quick Links:
- Connection Guide
Hide quick links:
Advertisement
Table of Contents
