Related Manuals for Toro QUIETECH Super Blower Vac
Summary of Contents for Toro QUIETECH Super Blower Vac
- Page 1 FORM NO. 3319–900GB Super Blower Vac Blower/Vacuum Model No. 51568 — 89000001 & Up Operator’s Manual...
-
Page 2: Important Safety Instructions
Do not handle plug or appliance with wet hands. Symbol Glossary Safety alert triangle — Thrown or flying symbol within triangle objects — Whole body indicates a hazard exposure Safety alert symbol Keep dry Printed in USA The Toro Company – 1998 All Rights Reserved... - Page 3 Read operator’s Electrical manual shock/electrocution Consult technical manual for proper Disconnect power service procedures Do not open or remove safety shields Severing of fingers or while engine is hand—impeller blade running Wear eye protection Assembly Vacuum 1. Grasp inlet cover and rotate it counterclockwise to remove Note: Refer to Figures section at the back of the manual.
-
Page 4: Before Starting
Before Starting Operation This appliance is intended for residential use only. Securing Extension Cord Use only an extension cord recommended for outdoor use. POTENTIAL HAZARD Debris can be blown by unit in operator’s or bystander’s direction. POTENTIAL HAZARD WHAT CAN HAPPEN Contact with water while operating unit could cause Flying debris can cause serious personal injury to electric shock. -
Page 5: Maintenance
Do not force tube into pile of debris. unit, remove inlet cover, and check impeller blades for wear. If IMPORTANT blades are severely worn, see your Authorized TORO Service Dealer for a new impeller. This unit is designed to pick up and shred dry leaves and other light, leafy debris. -
Page 6: Troubleshooting
Troubleshooting PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Unit won’t run or stops running 1. Unit not plugged in 1. Plug in unit 2. On/off switch in “off” position 2. Turn to “on” 3. Inlet cover or vacuum tube incorrectly 3. Secure cover or vacuum tube installed or removed 4. - Page 7 TORO AUSTRALIA POWER EQUIPMENT WARRANTY Subject to the warranty condition below, this tool care (in the opinion of the Company), and such (hereinafter called “the product”) is warranted by Toro warranty does not cover damage, malfunction or Australia (hereinafter called “the Company”) to be...
- Page 8 Figures 1605 1. Pointers aligned in lock position m-4021 1. Air inlet 2. Inlet cover 1988 m-3989 1. Blower tube 3. Tab 2. Blower 4. Latch housing outlet 1604 1. Housing 3. Tab pointer 2. Vacuum tube pointer 1621...
- Page 9 1989 1822 1. Bag collar 3. Velcro strap 2. Bag collar flange m-3990 1. Bag collar 3. Blower housing outlet 2. Tab 4. Latch 1990 1. Switch 2063 m-4003 1. Cord lock 1576...