Advertisement
Quick Links
ASS EMB LY
| NST RU CTl O N S
PRINTED IN U.S.A B61-0307-00(K)(TCA)
RO173
TEU
TINY
ae
Notes on Assembling
* Before operating your new KENWOOD product, read through this assem-
® During assembling, be sure to verify the numbers stamped on the boards.
*bly manual carefully to get the most out of it.
¢ Mount the rear panel after assembling the side panel on the bottom shelf
* Save this assembly instructions.
;
at a right angle.
a
<i
¢ When mounting the top shelf and kick plate on the side panel, use glue
Before
Assembling
;
for adhesive. Be sure to remove any excess glue before it dries.
¢ If the amplifier wobbles when its key switches are pressed, insert a woo-
* Be sure to check that all parts are accounted for before disposing of the
den dowel into the hole on the side panel and fix the rear of the amplifier.
packing case.
¢ A Phillips screwdriver and a mallet are required for assembling.
Handling Precautions
* Be carefull not to damage the floor and rack.
® Tempered glass is used for the glass doors for providing sufficient strength.
However, pay attention not to apply excessive force or to scratch the doors.
Cracking or breaking of the glass may occur.
¢ When moving the cabinet, remove all the components from the rack be-
fore carrying the cabinet. Also do not grasp the top shelf when carrying.
® To allow head radiation from the components, leave a space of 4 inches
between the cabinet and wall.
* Do not place the cabinet in a location subject to direct sunlight or near a
heater, an air-conditioner, or a place with high humidity.
IMPPRIANT SAFEGUARDS
~
ACaution : Read this page carefully to keep your safety.
6
unit. For be
sults, follow all warnings placed on the unit and adhere tothe
' = |
horizontal surface not subject to excessive dirt or vibrati
Please read" of the safety and operating instructions before operating this
~~,
4.Impact — Avoid placing the unit on an unstable surface. "tall it ona
* saad
a
operating anu'use instructions. These safety and operating instructions should
a
be retained for future reference.
1. Suffocation — After taking the unit out of the polyethylene bag, be sure
to dispose of the polyethylene bag out of the reach of children. Otherwise,
they may play with the bag, which could cause hazard of suffocation.
5. Modification — Do not attempt to open or modify the unit, for this could
,
cause fire hazard or malfunction.
;
2. Water and moisture — Do not place a liquid container, such as a vase and
water basin, on the unit. Also avoid installing the unit in a place subject
to dampness.
6. Cleaning — Do not use thinner, benzine or alcohol. When cleaning the unit,
wipe with a soft, dry cloth.
3. Heat — Do not install the unit near a source of heat, such as a heater, or
under direct sunlight.
7. Abnormal smell — In the event the unit generates smoke or abnormal smell,
immediately switch the power OFF and unplug the power cord. After this,
please contact your dealer or nearest service station as soon as possible.
POWER OFF!
Advertisement
