Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG NII64G00AZ
Summary of Contents for AEG NII64G00AZ
- Page 1 EN User Manual | Hob NII64G00AZ aeg.com\register...
-
Page 2: Table Of Contents
Welcome to AEG! Thank you for choosing our appliance. Get usage advice, brochures, trouble shooter, service and repair information: www.aeg.com/support Subject to change without notice. CONTENTS 1. SAFETY INFORMATION................2 2. SAFETY INSTRUCTIONS................4 3. INSTALLATION....................6 4. PRODUCT DESCRIPTION................8 5. - Page 3 • Children should be supervised to ensure that they do not play with the appliance. • Keep all packaging away from children and dispose of it appropriately. • WARNING: The appliance and its accessible parts become hot during use. Keep children and pets away from the appliance when in use and when cooling down.
-
Page 4: Safety Instructions
• Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. • Do not use the appliance before installing it in the built-in structure. • Do not use a steam cleaner to clean the appliance. •... - Page 5 – Do not store any small pieces or • If the mains socket is loose, do not sheets of paper that could be pulled in, connect the mains plug. as they can damage the cooling fans • Do not pull the mains cable to disconnect or impair the cooling system.
-
Page 6: Installation
• Switch off the appliance and let it cool WARNING! down before cleaning. • Do not use water spray and steam to Risk of fire and explosion. clean the appliance. • Fats and oil when heated can release • Clean the appliance with a moist soft flammable vapours. - Page 7 If you install the hob under a hood, please see the installation instructions of the hood for the minimum distance between the appliances. A = min. 6 mm, for double ovens from AEG, Electrolux and Zanussi. A = min. 12 mm, for double ovens from other brands.
-
Page 8: Product Description
4. PRODUCT DESCRIPTION 4.1 Cooking surface layout Induction cooking zone Control panel Flexible induction cooking area consisting of four sections 4.2 Control panel layout 1 12 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. -
Page 9: Daily Use
Sensor Function Description field Bridge To activate and deactivate the function. Hob²Hood To activate and deactivate the manual mode of the function. Control bar To set a heat setting. PowerBoost To activate the function. Lock / Child Safety Device To lock / unlock the control panel. 4.3 Display indicators Indicator Description... - Page 10 5.6 OptiHeat Control (3 step Residual heat indicator) WARNING! As long as the indicator is visible, there is a risk of burns from residual heat. The induction cooking zones produce the heat necessary for the cooking process directly in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware.
-
Page 11: Additional Functions
To deactivate the function: select the setting. Change the heat settings of the cooking zones manually, if necessary. cooking zone with and press . The remaining time counts back to 00. 5.9 Menu structure The timer finishes counting down, a signal The table shows the basic menu structure. - Page 12 6.4 Child Safety Device • you spill something or put something on the control panel for more than 10 This function prevents an accidental seconds (a pan, a cloth, etc.). A signal operation of the hob. sounds and the hob deactivates. Remove the object or clean the control panel.
- Page 13 6.6 Flexible induction cooking area WARNING! Refer to Safety chapters. Flex Bridge function The flexible induction cooking area consists of four sections. The sections can be combined into two cooking zones with different size, or into one large cooking area. You choose the combination of the sections 100-160mm by choosing the mode applicable to the size...
- Page 14 Incorrect cookware position: Incorrect cookware position: Flex Bridge Max Bridge mode Flex Bridge Big Bridge mode To activate the mode press until you see To activate the mode press until you see the correct mode indicator . This mode the correct mode indicator .
- Page 15 function. To change the heat setting use the left front control bar only. The left rear control bar is deactivated while the function operates. Use only one pot with a minimum bottom diameter of 160 mm when you operate the function. Incorrect cookware position: 1.
- Page 16 You can set a timer while PowerSlide operates. In this case the timer does not Automat‐ Boiling 1) Frying 2) deactivate the cooking zones when the set ic light time runs out. The timer affects all three Fan speed Fan speed cooking areas activated by the function at the same time.
-
Page 17: Hints And Tips
To activate automatic operation of the The light on the hood deactivates 2 function, deactivate the hob and activate minutes after deactivating the hob. it again. Activating the light You can set the hob to activate the light automatically whenever you activate the hob. To do so set the automatic mode to H1 –... - Page 18 • clicking: electric switching occurs. linear. When you increase the heat setting, it • hissing, buzzing: the fan operates. is not proportional to the increase of the The noises are normal and do not indicate consumption of power. It means that a any malfunction.
-
Page 19: Care And Cleaning
Cooker hoods with the Hob²Hood function To find the full range of cooker hoods which work with this function refer to our consumer website. The AEG cooker hoods that work with this function must have the symbol 8. CARE AND CLEANING... -
Page 20: Troubleshooting
particles of food. Use a wooden toothpick otherwise, the dirt can cause damage to to clean the gap between the glass the hob. Take care to avoid burns. Use a surface and the side trim. special hob scraper on the glass surface at an acute angle and move the blade on WARNING! the surface. - Page 21 Problem Possible cause Remedy You can hear a constant beep The electrical connection is incor‐ Disconnect the hob from the electrical noise. rect. supply. Ask a qualified electrician to check the installation. You cannot select the maximum The other zones consume the maxi‐ Reduce the heat setting of the other heat setting for one of the cook‐...
-
Page 22: Technical Data
Make sure, you operated the hob correctly. If not the servicing by a service 10. TECHNICAL DATA 10.1 Rating plate Model NII64G00AZ PNC 949 598 190 00 Typ 62 B4A 09 AA 220 - 240 V / 400 V 2N, 50 Hz Induction 7.35 kW... -
Page 23: Energy Efficiency
11. ENERGY EFFICIENCY 11.1 Product Information according to EU and UK Ecodesign Regulations Model identification NII64G00AZ Type of hob Built-In Hob Number of cooking areas Heating technology Induction Length (L) and width (W) of the cooking area Left L 45.8 cm W 21.4 cm... - Page 24 867384582-B-102024...