Unicol TL1-PZX Manual

Download this manual

01865 767676

sales@unicol.com

www.unicol.com

TL1 - PZX

Guide Max. Screen Weight: 60kg

Revised 19/06/23

*Please check model specific details before installing*

WARNING

Please carefully inspect the product before assembling. If you notice any apparent damage, call your carrier

claims agent and do not continue the installation until it has been reviewed. Please watch for pinch points.

Do not put your fingers between moveable parts. Do not tamper with or disassemble any spring loaded

parts. Before installing, make sure that the supporting surface will support five times the combined load of

the solution and the hardware. Never exceed the maximum load capacity. Please also layout all components

to ensure that you have all of the required parts before proceeding (see BOM list on following page). Use of

this product for anything other than its specified use may result in failure or personal injury. This product is

intended for indoor use only. We recommend using a qualified trades person for installation. Use an assistant

or lifting equipment to lift and position products.

For support, please call: +44 (0)1865 767676 or email: sales@unicol.com

Page 1 This product is intended for indoor use only. We recommend using a qualified trades person for installation. Use an assistant or lifting equipment to lift and position products. For support, please call: +44 (0)1865 767676 or email: sales@unicol.com...
Page 2 01865 767676 sales@unicol.com www.unicol.com TOOLS REQUIRED INSTALLERS REQUIRED 3/16th Allen Key 17mm Spanner (for M10) Pozidrive Screwdriver COMPONENTS DESCRIPTION Base Mast Unit Mount Backplate (PZX) Mount Arms (PZX) Revised 19/06/23...
Page 3 01865 767676 sales@unicol.com www.unicol.com STEP 1 STEP 2 Identify base and mast. The base is heavy so you Stand the assembly upright and remove rear cover by might want another person to support it. Allow the loosening the 6 x M6 allen screws sufficiently in order floor to take the weight of the base and mast and to lift the rear cover and pull towards you.
Page 4 01865 767676 sales@unicol.com www.unicol.com STEP 5 STEP 6 Fix the mount arms to the screen fixing holes using Together with another person lift the screen and fixing screws for your particular screen. Universal lower onto the mount backplate so that the hooks at fixing pack supplied.