Table of Contents
Advertisement
Solutions to Simple Stacking Problems
Solutions to Simple Blending Problems
Solutions to Sound Problems
Parent topic:
Solutions When No Image Appears
If no image appears, try the following solutions:
• Check the status lights to confirm the projector is operating normally.
• Press the Shutter button on the remote control to see if the image was temporarily turned off.
• Make sure all necessary cables are securely connected and the power is on for the projector and
connected video sources.
• Press the projector's power button to wake it from standby or sleep mode. Also see if your connected
computer is in sleep mode or displaying a blank screen saver.
• Adjust the Brightness setting or select the Normal Power Consumption setting.
• Adjust the brightness of your projector's light source.
• For images projected with Windows Media Center, reduce the screen size from full screen mode.
• For images projected from applications using Windows DirectX, turn off DirectX functions.
• If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
Parent topic:
Solutions When "No Signal" Message Appears
If the "No Signal" message appears, try the following solutions:
• Press the Source Search or Search button and wait a few seconds for an image to appear.
• Turn on the connected computer or video source, and press its play button to begin your presentation,
if necessary.
• Check the connection from the projector to your video sources.
• If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
• If necessary, turn the projector and the connected computer or video source off and then on again.
• If you are projecting from an HDMI source, replace the HDMI cable with a shorter one.
• Try a different video cable.
Solving Problems
Solving Image or Sound Problems
312
Advertisement
Table of Contents
