Using The Appliance - Washing & Drying - AEG L 75480 WD User Manual
Hide thumbs
Also See for L 75480 WD:
- User manual (76 pages) ,
- User manual (40 pages) ,
- User manual (40 pages)
Table of Contents
Advertisement
Available languages
Available languages
20 www.aeg.com
15. USING THE APPLIANCE - WASHING & DRYING
15.1 NON-STOP programme -
Washing & Automatic drying
CAUTION!
Do not put a plastic device/ball
for the detergent into the
drum.
• Press button
ance.
• Load the laundry.
• Measure out the detergent and fabric
conditioner.
• Turn the programme dial to the wash-
ing programme. The display shows the
wash symbols.
CAUTION!
Do not set a spin speed lower
than the automatic speed of
the set programme.
• Set the available options.
• Press the button
line appears under one of the dryness
level symbol.
The time value on the display is the
duration of the washing + drying cy-
cles calculated on a default load size.
• Press button
gramme.
The display shows the new time value
each minute.
1
to activate the appli-
until the black
7
The iron dry level
comes on.
The cupboard dry
level comes on.
The extra dry level
comes on.
The drying symbol
comes on.
4
to start the pro-
The set dryness level sym-
bol stays on.
The others level symbols
go off.
The door locked symbol
comes on.
The last minutes of the drying cy-
cle the appliance performs the
anti-crease and the cooling pha-
ses.
• When the programme is completed,
the appliance stops automatically.
• The acoustic signals operate.
•
When the symbol
can open the door.
• Remove the laundry from the appli-
ance. Make sure that the drum is emp-
ty.
• Close the water tap.
• Keep the door ajar, to prevent mildew
and odours.
15.2 NON-STOP programme -
Washing & Timed Drying
CAUTION!
Do not put a plastic device/ball
for the detergent into the
drum.
• Press button
1
to activate the appli-
ance.
• Load the laundry.
• Measure out the detergent and the
fabric conditioner.
• Turn the programme dial to the wash-
ing programme. The display shows the
wash symbols.
Do not set a spin speed lower than
the automatic speed of the set pro-
gramme.
• Set the available options.
• Press the button
time value. The display shows a mini-
mum time value.
The drying symbol
comes on.
Set drying time value
• After some seconds the display shows
the total duration of the cycles.
Final time value (washing
+ drying + anti-crease +
cooling phases)
goes off, you
7
to set the drying
Advertisement
Chapters
Table of Contents
