hit counter script
LG 75UH5E-B User Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. Digital Signage
  5. 75UH5E-B
  6. User manual
LG 75UH5E-B User Manual

LG 75UH5E-B User Manual

Hide thumbs Also See for 75UH5E-B:
Table of Contents

Advertisement

Quick Links

Download this manual
USER GUIDE
LG Digital
Signage
(MONITOR SIGNAGE)
Please read this manual carefully before operation and retain it for future
reference.
webOS 4.0
www.lg.com

Advertisement

Table of Contents
loading

Related Manuals for LG 75UH5E-B

Summary of Contents for LG 75UH5E-B

  • Page 1 USER GUIDE LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operation and retain it for future reference. webOS 4.0 www.lg.com...

  • Page 2: Table Of Contents

    CONTENTS SETTINGS ........4 - Display .................23 Picture Mode - Home ..................4 Aspect Ratio Global Buttons Rotation Dashboard Expert Controls Content Manager - Sound ...................28 - Ez Setting ................5 Sound Mode Video Wall Sound Out On/Off Scheduler Audio Out SI Server Setting AV Sync Adjustment Server Setting Digital Audio Input...
  • Page 3 In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing...

  • Page 4: Settings

    NOTE • Software-related content may be changed without prior notice due to upgrades of the product functions. • Some features described in the User Manual may not be supported in certain models and countries. • SNMP 2.0 is supported. SETTINGS Home Global Buttons •...

  • Page 5: Ez Setting

    Ez Setting Video Wall Ez Setting Video Wall Set Video Wall options to create a wide visual canvas. • Tile Mode: Turn Tile Mode on or off. • Tile Mode Settings: Display a single integrated screen on multiple Signage monitors. •...

  • Page 6: Fail Over

    Fail Over Ez Setting Fail Over This feature enables automatically switching to other input sources in order of priority if the primary signal is interrupted. It also enables the automatic playback of the content stored on your device. • On/Off: Turns Fail Over on or off.
  • Page 7 NOTE • If the status regarding any of the following items changes or becomes abnormal, a status message can be sent. - 1. Temp. Sensor: If the set reaches a dangerous temperature, its current temperature is recorded, and an email containing such information is sent.

  • Page 8: Play Via Url

    Play via URL Ez Setting Play via URL Play content you want to play automatically through the built-in web browser. • Loader: Turns Play via URL on or off. • URL: Enter the URL address to display automatically. • Preview: Preview your desired website by accessing the specified URL. Save: Save the specified URL.

  • Page 9: Multi Screen

    Multi Screen Ez Setting Multi Screen This feature allows you to view multiple external inputs and videos on a single screen. PIP Mode PBP Mode NOTE • In multi-screen mode, the DP daisy chain feature is not supported. Selecting Screen Layout When you enter multi-screen mode without having set any screen layout, the screen layout selection menu appears.
  • Page 10 Changing Screen Input Press the button on the top right of each split screen to select the desired input. NOTE • Inputs which have already been selected for other split screens cannot be selected again. To select them, press the RESET button to reset the inputs for all screens first.

  • Page 11: General

    General Language General Language Settings You can select the menu language to be displayed on the screen. • Menu Language: Sets the language of your Signage monitor. • Keyboard Language: Sets the language of the keyboard displayed on the screen. System Information General System Information...

  • Page 12: Power

    Power General Power Power-related feature settings No Signal Power Off (15 Min) Set whether to use the 15 Min Auto Off feature. • You can set this option to or Off. • If you set this feature to On, the product turns off when it has remained in No Signal status for 15 minutes. If you set this feature to Off, the 15 Min Force Off feature is disabled.
  • Page 13 PM Mode • Power Off (Default): Set the normal DC off mode. Sustain Aspect Ratio: Identical to normal DC off mode except that the Switching IC remains on. On certain models, • this applies only to a specific input mode (DisplayPort) and has the same effect as Screen Off Always in other input modes.

  • Page 14: Network

    Power Indicator • This function enables you to change the Power Indicator settings. Power Indicator. • Setting to will turn on Power Indicator. • Setting to will turn off • Regardless of settings in Power Indicator, Power Indicator will be turned on for approximately 15 seconds.
  • Page 15 LAN Daisy Chain • LAN Daisy Chain forms a daisy chain of LAN ports so that even if you connect only one monitor set to a network, the other sets in the daisy chain are connected to the network. • However, the first monitor set in the daisy chain must be connected to the network through a port that is not used for the daisy chain connection.
  • Page 16 For details, contact your ISP. • LG is not responsible for any malfunction of the display or Internet connection failures due to communication errors/ malfunctions associated with your Internet connection or other connected equipment.
  • Page 17 Tips for When Configuring Wireless Network Settings • The wireless network may be affected by interference from a device that uses 2.4 GHz frequency, such as a wireless telephone, Bluetooth device or microwave. Interference may also be caused by a device that uses 5 GHz frequency such as Wi-Fi devices.

  • Page 18: Safety Mode

    Safety Mode General Safety Mode Set to this function for safe performance. ISM Method If a still image is displayed on the screen for an extended period of time, image sticking can occur. The ISM method is a feature that prevents image sticking. Mode ISM Method •...
  • Page 19 Start Time • Set the Start time. • This option is available only when Repeat is set to Schedule. • You cannot set the same time for Start time and End time. End Time • Set the End time. • This option is available only when Repeat is set to Schedule.

  • Page 20: Expert Controls

    This option enables BLE Beacon, one of Bluetooth 4.0's features. • Beacon Mode (On/Off Toggle): enables the Beacon feature. • The LG Beacon/iBeacon/Eddystone Type Beacon features are supported. • iBeacon - Beacon UUID (hex): Set the UUID. 1. Field1: 4byte hex value (8 digits) 2.
  • Page 21 OPS Control • OPS Power Control: This feature enables you to control the power of the OPS as you turn on/off the display. - Disable: Disable OPS Power Control. Sync (On): Synchronize the monitor's power status only when the monitor is on. Sync (On/Off): Synchronize the monitor's power status with the OPS.
  • Page 22 Input Manager Specify a label for each input source. SIMPLINK Setup SIMPLINK Setup is set to On, you can use the SIMPLINK provided by LG Signage. • When the Device ID: Set the ID of the device connected via CEC wiring. You can choose a value between and E.

  • Page 23: Display

    Display Picture Mode Display Picture Mode Mode This feature enables you to choose the optimal picture mode for your installation environment. • Mall/QSR, Transportation, Education, Gov./Corp.: Display the picture optimally for your installation environment. • Normal: Display the picture at normal contrast, brightness, and sharpness. •...
  • Page 24 Customize • Backlight, OLED Light: Adjust the brightness of the screen by adjusting the brightness of the backlight. The closer the value is to 100, the brighter the screen is. • Contrast: Adjust the difference between the light and dark areas of the picture. The closer the value is to 100, the greater the difference is.
  • Page 25 • Picture Option: Customize the picture options. Noise Reduction: Remove randomly popping dots to make the picture look clearer. MPEG Noise Reduction: Reduce the noise generated in the process of creating a digital video signal. Black Level: Adjust the brightness and contrast of the screen by adjusting the black level of the screen. (Recommended settings based on input signals: Backlight 0 - 255 High, RGB 16 - 235: Low, YCbCr: Low) Real...

  • Page 26: Aspect Ratio

    Aspect Ratio Display Aspect Ratio This feature enables you to change the picture size to view the picture at its optimal resolution. • Full Wide: Stretch the picture to fill the screen. • Original: Display the picture at its original resolution. Rotation Display Rotation...

  • Page 27: Expert Controls

    Expert Controls Display Expert Controls UHD Deep Color If you connect an HDMI, DP, or OPS device to one of the Deep Color adjustable ports, you can select between UHD Deep Color On (6G) or Off (3G) in the UHD Deep Color settings menu. If a compatibility issue occurs with a graphics card when the Deep Color option is set to On at 3840 x 2160 @ 60 Hz, set the Deep Color option back to Off.

  • Page 28: Sound

    Sound Sound Mode Sound Sound Mode Sound Mode The best sound quality will be selected automatically depending on the video type currently being watched. • Standard: This sound mode works well for content of all types. • Cinema: Optimize sound for watching movies. •...

  • Page 29: Sound Out

    Some recently connected devices may automatically attempt to reconnect to the Signage monitor when it is turned • It is recommended that you set LG audio devices that support LG Sound Sync to LG TV mode or LG Sound Sync mode before connecting.

  • Page 30: Audio Out

    (0~15): Adjust the sync between video and audio coming from external speakers, such as those connected to the digital audio output port, LG audio equipment, or headphones. Moving closer to – speeds up the audio output, while moving closer to + slows down the audio output, compared to the default value.

  • Page 31: Admin

    Admin Lock Mode Admin Lock Mode Home Dashboard Lock This feature enables you to restrict changes made to dashboard lock settings on the Home screen. USB Lock This feature enables you to configure the USB lock feature so that settings or content cannot be changed. OSD Lock This feature enables you to configure the OSD lock feature so that settings or content cannot be changed.

  • Page 32: Change Password

    Change Password This feature enables you to set the password you use to enter the Installation menu. (The default password: 000000) Enter a new 6-digit password. Enter the same password again in the Confirm Password field for confirmation. Enterprise Settings •...

  • Page 33: Content Manager

    CONTENT MANAGER Web Login • Different features are supported depending on the product. This Signage product comes with a feature that enables you to access it on your PC or mobile device. - Content Manager, Group Manager 2.0, Control Manager, Log Out, Change Password menus are provided. •...
  • Page 34 DELETE Select your desired type of content from the tab on the left and click DELETE in the upper right-hand corner of the screen. Select the content you wish to delete. Click DELETE in the upper right-hand corner of the screen. You can see that the content has been deleted.

  • Page 35: Scheduler

    Scheduler (Scheduler) The Content Manager app's scheduler feature enables certain content to be played at a scheduled time through a playlist or external input. Creating a Schedule Click Add New Schedule in the upper right-hand corner of the screen. Choose between Playlist Input Source.

  • Page 36: Template

    Delete Schedule Click DELETE in the upper right-hand corner of the screen. Select the schedules you wish to delete. Click DELETE. Check that the schedules have been deleted. Calendar View Calendar View. When you have registered schedules, click You can see that the schedules registered are displayed in the form of a timetable. Distribute Distribute Click...
  • Page 37 Supported Photo & Video Files NOTE • Subtitles are not supported. • The photo feature is not supported in OLED model. Supported video codecs Extension Codec .asf, .wmv Video VC-1 Advanced Profile (except for WMVA), VC-1 Simple and Main Profiles Audio WMA Standard (excluding WMA v1/WMA Speech) .avi...
  • Page 38 Supported Photo File Formats File type Format Resolution .jpeg, .jpg, .jpe JPEG • Minimum: Min: 64 x 64 • Maximum: Normal Type: 15360 (W) x 8640 (H) Progressive Type: 1920 (W) x 1440 (H) .png • Minimum: Min: 64 x 64 •...
  • Page 39 • If your USB storage device has multiple partitions, or if you use a USB multi-card reader, you can use up to four partitions or USB memory devices. • If a USB storage device is connected to a USB multi-card reader, its volume data may not be detected. •...

  • Page 40: Group Manager 2.0

    Group Manager 2.0 This feature enables you to group together multiple monitor sets on a single network into the same group and to distribute content (schedules and playlists) or copy setting data on a group basis. This feature has two modes, Master and Slave, and it can access the browser on your PC or mobile device.
  • Page 41 GROUP MANAGEMENT • Creating a New Group Add New Group. 1. Click 2. Enter a group name. 3. Click Device, select the devices you wish to add to the group, and add them. 4. Click Done, and you will see that a new group has been created. •...
  • Page 42 Setting Data Cloning Select your desired group and click Clone. Check that the data have been copied on the slave sets. Content Distribute Select the type of content you wish to distribute (Schedules or Playlists). Select the content you wish to distribute. Select the group to which you wish to distribute the content and click Distribute.

  • Page 43: Screenshare

    Devices on your laptop. Click Add Device in the top center of the screen, and then you will see a list of nearby WiDi-capable LG Signage monitors. From the list of detected Signage monitors, select one you wish to connect to and click Connect.

  • Page 44: Management Tools

    MANAGEMENT TOOLS Admin Control and check the status of the display through the Web browser. This function is available for PCs and mobile devices. Different features are supported depending on the product. Function • Dashboard: Display a summary of the product's status and provides links to each page. Display &...

  • Page 45: Picture Id

    Picture ID AUDIO (RGB/DVI) RS-232C OUT RS-232C OUT RS-232C OUT Picture ID is used to change the settings of a specific set (display) using a single IR receiver for multi-vision. Communication is possible between a monitor with an IR receiver and other monitors using RS-232C cables. Each RS-232C IN RS-232C IN RS-232C IN...

  • Page 46: Touch

    TOUCH Touch Assistive Menu This touch-exclusive feature allows the user to configure settings without a remote control. Touching the screen for a certain period of time or pressing the Touch Assistive Menu local key brings up the Touch Assistive Menu on the screen. Different features are supported depending on the product.

  • Page 47: Idb (Interactive Digital Board)

    IDB (Interactive Digital Board) • This feature may not be available on some models. • Different features are supported depending on the product. This feature provides writing function. To run Whiteboard, press the (IDB) button or the local key Whiteboard button.

  • Page 48: Ir Code

    IR CODE • All models do not support the HDMI/USB function. • Some key codes may not be supported depending on the model. Code (Hex) Function Remarks Remote control button (Power) MONITOR ON Remote control button MONITOR OFF Remote control button (Energy Saving) Remote control button INPUT (Select input)
  • Page 49 Code (Hex) Function Remarks (Settings/Menu) Remote control button Auto Configuration Remote control button (Up) Remote control button (Down) Remote control button Remote control button (Right) (Left) Remote control button Remote control button (OK) (BACK) Remote control button Tile Remote control button Exit Remote control button Picture ID On (red)

  • Page 50: Controlling Multiple Products

    CONTROLLING MULTIPLE PRODUCTS • This only applies to certain models. Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. In the Option menu, the Set ID must be between 1 and 1000 without being duplicated. Connecting cables •...

  • Page 51: Communication Parameter

    Communication Parameter NOTE • When using 3-wire connections (non-standard), an IR Baud Rate: 9600 BPS daisy chain cannot be used. Data Length: 8 bits • Be sure to only use the provided gender to connect Parity Bit: None properly. Stop Bit: 1 bit •...

  • Page 52: Command Reference List

    Command Reference List Command Data (Hexadecimal) Power 00 to 02 Select Input See Select Input Aspect Ratio Aspect Ratio Brightness Control 00 to 04 Picture Mode Picture Mode Contrast 00 to 64 Brightness 00 to 64 Sharpness 00 to 32 Color 00 to 64 Tint...
  • Page 53 Command Data (Hexadecimal) Software Version White Balance Red Gain 00 to FE White Balance Green Gain 00 to FE White Balance Blue Gain 00 to FE White Balance Red Offset 00 to 7F White Balance Green Offset 00 to 7F White Balance Blue Offset 00 to 7F...
  • Page 54 Command Data (Hexadecimal) Power On Status 00 to 02 Wired Wake On LAN 00 to 01 Screen Rotation 00 to 03 Time Sync n, 16 00 to 01 Contents Sync 00 to 01 LAN Daisy Chain n, 84 00 to 01 External Input Rotation n, 85 00 to 03...
  • Page 55 Command Data (Hexadecimal) Digital Audio Input n, a2 00 to 01 Booting Logo Image n, a3 00 to 01 SoftAP n, a4 00 to 01 Natural Size n, a5 00 to 64 Play Saved Internal Media n, a8 See Playback of Saved Internal Media No Signal Image n, a9 00 to 01...

  • Page 56: Transmission/Reception Protocol

    Transmission/Reception Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1]: This command is used to identify between the adjustment setting or the user adjustment modes. * [Command2]: This command is used to control the monitor. * [Set ID]: Used for selecting a set you want to control. A unique Set ID can be assigned to each set ranging from 1 to 1000 (01H to FFH) under Settings in the OSD menu.
  • Page 57 Power (Command: k a) Aspect Ratio (Command: k c) Controls the power on/off status of the monitor. Adjusts the aspect ratio of your monitor. Transmission Transmission [k][a][ ][Set ID][ ][Data][Cr] [k][c][ ][Set ID][ ][Data][Cr] Data Data Full Screen Original 02: Restart Acknowledgment Acknowledgment [c][ ][Set ID][ ][OK/NG][Data][x]...
  • Page 58 Contrast (Command: k g) Tint (Command: k j) Adjusts the screen contrast. Adjusts the screen tints. Transmission Transmission [k][g][ ][Set ID][ ][Data][Cr] [k][j][ ][Set ID][ ][Data][Cr] Data 00-64: Contrast 0-100 Data 00-64: Tint Red 50-Green 50 Acknowledgment Acknowledgment [g][ ][Set ID][ ][OK/NG][Data][x] [j][ ][Set ID][ ][OK/NG][Data][x] Brightness (Command: k h)
  • Page 59 Sound Mode (Command: d y) Current Time 1 (year/month/day) (Command: f a) Selects a sound mode. Sets the Clock 1 (year/month/day) values and Auto Time. Transmission Transmission [d][y][ ][Set ID][ ][Data][Cr] 1. [f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] 2. [f][a][ ][Set ID][ ][0][0][ ][Data1][Cr] Data Standard Music...
  • Page 60 No Signal Power Off(15Min) (Command: f g) Default Settings (Command: f k) Sets the monitor to enter Automatic Standby mode if there is Executes Reset. no signal for 15 minutes. (Initialize Screen can only be executed in RGB input mode.) Transmission Transmission [f][g][ ][Set ID][ ][Data][Cr]...
  • Page 61 24. Time Elapsed (Command: d l) White Balance Red Gain (Command: j m) Displays the time that has elapsed after your monitor has Adjusts the red gain value for white balance. turned on. Transmission Transmission [j][m][ ][Set ID][ ][Data][Cr] [d][l][ ][Set ID][ ][Data][Cr] Data 00-FE: Red Gain 0-254 Data...
  • Page 62 White Balance Red Offset (Command: s x) Backlight (Command: m g) Adjusts the red offset value for white balance. Adjusts the backlight brightness. Transmission Transmission [s][x][ ][Set ID][ ][Data][Cr] [m][g][ ][Set ID][ ][Data][Cr] Data 00-7F: Red Offset 0-127 Data 00-64: Backlight 0-100 FF: Checks red offset value Acknowledgment Acknowledgment...
  • Page 63 Tile Mode Check (Command: d z) (Command: f j) Checks the tile mode. Sets the DPM(Display Power Management) function. Transmission Transmission [d][z][ ][Set ID][ ][Data][Cr] [f][j][ ][Set ID][ ][Data][Cr] Data FF: Check Tile Mode Data 04: 1 minute Acknowledgment 05: 3 minutes [z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] 06: 5 minutes Data 1 00: Tile Mode off...
  • Page 64 Fail Over Mode (Command: m i) 44. Remote Control Key Lock (Command: t p) Selects a sound mode. Configures the settings of the product's remote control key. Transmission Transmission [m][i][ ][Set ID][ ][Data][Cr] [t][p][ ][Set ID][ ][Data][Cr] Data Data 00: Unlocks all keys Auto 01: Locks all keys except Power key User Setting...
  • Page 65 46. Status Check (Command: s v) Data 07 (when checking whether the Top, Bottom and Main temperature sensors are working Checks the current signal of the product. properly) Transmission Data1 00: All temperature sensors are faulty [s][v][ ][Set ID][ ][Data][ ][FF][Cr] 01: Top normal, Bottom faulty, Main faulty Data 02: Check whether there is a signal...
  • Page 66 PM Mode (Command: s n, 0c) Network Setting (Command: s n, 80 or 81 or 82) Sets the PM mode. Configures network and DNS settings. Transmission Transmission [s][n][ ][Set ID][ ][0c][ ][Data][Cr] [s][n][ ][Set ID][ ][Data1][ ][Data2][ ] [Data3][ ][Data4][ ][Data5][Cr] Data Power Off (Basic)
  • Page 67 Power On Status (Command: t r) Time Sync (Command: s n, 16) Sets the Power On status of the monitor. Sets Time Sync. Transmission Transmission [t][r][ ][Set ID][ ][Data][Cr] [s][n][ ][Set ID][ ][1][6][ ][Data][Cr] Data LST(Last Status) Data STD(Standby) * This feature only works when the monitor is in Master mode. PWR(Power On) * This feature does not work if the current time is not set.
  • Page 68 External Input Rotation (Command: s n, 85) Brightness Scheduling (Command: s s) Sets the External Input Rotation feature. Sets Brightness Scheduling. Transmission Transmission [s][n][ ][Set ID][ ][8][5][ ][Data][Cr] [s][s][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data Data1 01: 90 degrees 1. f1 to f6 (data reading) 02: 270 degrees F1: Reads the 1st Brightness Scheduling’s data 03: 180 degrees...
  • Page 69 Multi Screen Mode & Input (Command: x c) Aspect Ratio (Multi screen) (Command: x d) Saves and controls Multi Screen modes and inputs. Controls the aspect ratio of Multi Screen. Transmission Transmission [x][c][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ][Data4] [x][d][ ][Set ID][ ][Data1][ ][Data2][Cr] [ ][Data5][ ][Cr] Data1 01: Controls the Main input Data 1 (Sets MultiScreen mode)
  • Page 70 65. Stop Video (Command: k x) Holiday Setting (Command: s n, 9b) Controls Stop Video. Sets holidays. Transmission Transmission [k][x][ ][Set ID][ ][Data][Cr] 1. [s][n][ ][Set ID][ ][9][b][ ] [Data1][ ][Data2][ ][Data3][ ] Data 00: The Stop Video feature is on. [Data4][ ][Data5][ ][Data6][Cr] 01: The Stop Video feature is off.
  • Page 71 ISM Method (Command: s n, 9c) 3. Deleting a Schedule E0: Deletes all holiday schedules Sets UPnP.mode. E1: Deletes the 1st holiday schedule Transmission E2: Deletes the 2nd holiday schedule [s][n][ ][Set ID][ ][9][c][ ][Data][Cr] E3: Deletes the 3rd holiday schedule Data E4: Deletes the 4th holiday schedule E5: Deletes the 5th holiday schedule...
  • Page 72 Wi-Fi Lock (Command: s n, 9f) 75. See Backup via Storage (Command: s n, a1) Sets Wi-Fi Lock. Sets Backup via Storage. Transmission Transmission [s][n][ ][Set ID][ ][9][f][ ][Data][Cr] 1. [s][n][ ][Set ID][ ][a][1][ ][Data1][Cr] 2. [s][n][ ][Set ID][ ][a][1][ ][Data1][Data2][Cr] Data 00: Wi-Fi Unlock 01: Wi-Fi Lock...
  • Page 73 Digital Audio Input (Command: s n, a2) Natural Size (Command: s n, a5) Sets Digital Audio Input. Sets the Natural Size feature. Transmission Transmission [s][n][ ][Set ID][ ][a][2][ ][Data][Cr] [s][n][ ][Set ID][ ][a][5][ ][Data][Cr] Data 00: Digital Data 00-64: Natural Size 0 - 100 01: Analog Acknowledgment Acknowledgment...
  • Page 74 Audio Out (Command: s n, aa) Apply to all inputs (Command: n, 52) Sets Audio Out to Off/Variable/Fixed. Apply the video mode and low value of the current input to the same video value of all inputs. Transmission Transmission [s][n][ ][Set ID][ ][a][a][ ][Data][Cr] [s][n][ ][Set ID][ ][5][2][ ][Data][Cr] Data Data...
  • Page 75 Time to OFF Scheduling (Command: f e) 3. 01h to 0ch (Timer Power On days setting) 02: Repeat Daily Sets Off Timer settings. 03: Repeat from Monday to Friday Transmission 04: Repeat from Monday to Saturday [f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] 05: Repeat from Saturday to Sunday Data1 06: Repeat on Sunday...

This manual is also suitable for:

Uh5e series

Table of Contents