Table of Contents
Advertisement
1
3
5
3/4
Figure 51
Note: Ensure the oil filter gasket touches the engine
and then an extra 3/4 turn is completed.
4. Fill the crankcase with the proper type of new oil; refer
to Changing the Oil.
G015196
2
4
G015198
Servicing the Spark Plug
Service Interval: Every 200 hours—Check, clean and regap
the spark plug.
Every 600 hours—Replace the spark plugs.
Make sure the air gap between the center and side electrodes
is correct before installing the spark plug. Use a spark plug
wrench for removing and installing the spark plug(s) and a
gapping tool/feeler gauge to check and adjust the air gap.
Install a new spark plug(s) if necessary.
®
Type : Champion
XC10YC or equivalent
Air Gap: 0.030 inch (0.76 mm)
Removing the Spark Plug
1. Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
2. Disengage the PTO, move the motion control levers to
the neutral locked position and set the parking brake.
3. Remove the lefthand hydraulic unit shroud in the order
listed with Figure 52. This gives you access to the front
spark plug.
37
Advertisement
Table of Contents
