Related Manuals for Gazelle GC2032
Summary of Contents for Gazelle GC2032
- Page 1 GC2032 Cordless Brushless Impact Driver Pictures of battery packs with different configurations vary in the illustration.
- Page 2 Read through carefully and understand these instructions before use.
- Page 3 not use a power tool while you are tired or under GENERAL POWER TOOL SAFETY the influence of drugs, alcohol or medication. A WARNINGS moment of inattention while operating power tools may result in serious personal injury. WARNING Read all safety warnings, b) Use personal protective equipment.
- Page 4 6) Service in the hands of untrained users. e) Maintain power tools and accessories. Check a) Have your power tool serviced by a qualified for misalignment or binding of repair person using only identical replacement moving parts, breakage of parts and any other parts.
- Page 5 Return exhausted batteries to your local collection or recycling point. Technical Data ●Driving in and loosening screws in wood, metal and plastic. ●Drilling in wood, metal and plastic. Model GC2032 Power 20 V Max. Clamping Capacity 6.35 mm Hex Max. Screw Diam.
- Page 6 GENERAL DESCRIPTIONS Fig.B ① ② Power Indicator Light When the power button or the startup tool is pressed, the power indicator will display the battery pack's power, which can be indicated by the status of four red LED lights (hereinafter referred to as red lights).(Fig. C) Fig.C 1.Power Indicator Light...
- Page 7 ■Right/Clockwise Rotation on the screws(nuts). If the tool does not stop, continue Depress the reversing switch lever from side B to to turn, the sleeve can easily slip away from the nut or side A for clockwise rotation for drilling and driving in bolt head.
- Page 8 Continuous Use For battery tools: If the tool is operated continuously until the battery Ambient temperature range during operation and cartridge has discharged, allow the tool to rest for storage: 0℃ - 45℃ 15minutes before proceeding with a fresh battery. Recommended ambient temperature range during charging: 5℃...
- Page 9 EXPLANATION OF GENERAL VIEW Motor Housing Rubber Pin Deep Groove Ball Bearing Reversing Switch Lever Armature Signal Switch Buckle LED Shade Stator Torque Setting Panel Driving Gear Torque Presetting label Rear Gear Housing Control Panel Assembly Gasket Battery Socket Deep Groove Ball Bearing Pan Head Tapping Screw Washer Nameplate...