12.4. WLAN connection via WPS
Once a WLAN network providing the option to connect via WPS has been selected, the
WPS menu appears. If you do not want to establish a connection via WPS, select SKIP
WPS here.
12.4.1. WPS button
Select PUSH BUTTON to enable the WPS function to be used via the router's WPS
button.
Then press the WPS button on the router and press SELECT to confirm the connection
with the internet radio.
To this end, please also note the information in your router's user manual.
• The device will now establish a connection with the network. Once the connection is
successful, a corresponding notice is then displayed.
• The device can now play back media via the network and receive internet radio
stations as long as there is an active internet connection via the network.
• The device stores the connection data so that it does not need to be re-entered to re-
establish the connection.
12.4.2. Entering a PIN
If the router does not feature a WPS button but does provide the option for a WPS
connection by entering a PIN on the router's web interface, select ENTER PIN.
When prompted, enter the PIN shown on the internet radio display on the router's web
interface and press SELECT to confirm the entry.
To this end, please also note the information in your router's user manual.
The device will now establish a connection with the network. Once the connection is
successful, a corresponding notice appears.
Press SELECT to confirm.
The device stores the connection data so that it does not need to be re-entered to re-
establish the connection.
The device can now play back media via the network and receive internet radio stations as
long as there is an active internet connection via the network.
12.5. Entering a network key
If you have skipped the WPS menu, you must enter the network key.
Enter the network key for the WLAN access point using the number/character buttons
on the remote control.
Alternatively:
You can enter the network key using the NAV/OK dial on the device:
26 - English