Switching On And Off; Increasing The Suction Power; Using The Powerunit Solo; Cleaning And Care - Miele Duoflex HX1 Operating Instructions Manual
Cordless vacuum cleaner
Hide thumbs
Also See for Duoflex HX1:
- Quick start manual (2 pages) ,
- Operating instructions manual (104 pages)
Table of Contents
Advertisement
Available languages
Available languages
en
Switching on and off (Fig. 29)
If you have charged the battery dir-
ectly, pull the charging plug out of the
charging socket on the bottom on the
rear of the PowerUnit.
For the best possible cleaning results,
always start the ComfortClean self-
cleaning function before switching on
the vacuum cleaner (see "Cleaning and
care" – "Activating the ComfortClean
self-cleaning function").
Press the upper button on the
handle .
The vacuum cleaner will switch on using
the lowest power level.
Increasing the suction power (Fig. 30)
Press the lower button on the handle.
The higher power level is selected and
the LED lights up.
Press the button again to return to the
lower power level.
Using the PowerUnit solo (Fig. 31)
The PowerUnit can be used on its own
without the suction tube and electro-
brush as a quick way of vacuuming up
crumbs and fluff in specific areas.
Tip: This configuration is particularly
suitable when using the three-piece ac-
cessory set (see "Using the supplied ac-
cessories").
54
Cleaning and care
Risk of injury caused by rotating
roller brush.
You can injure yourself on the rotating
roller brush.
Always switch the vacuum cleaner
off before cleaning and caring for it.
Use the On/Off switch on the handle
to do this.
Filter system (Fig. 32)
Screw cap
Fine dust filter
Dust container
d Pre-filter
e Dust container flap
Activating the ComfortClean self-
cleaning function (Fig. 33)
Always run the interim cleaning function
for the fine dust filter before emptying
the dust container. You should also run
it whenever the suction power begins to
drop.
This enables the vacuum cleaner to
achieve the very best cleaning perform-
ance again straight away.
Turn the screw cap 3 times by 180°.
When turning the cap, you will hear a
noise, which is a normal part of how the
ComfortClean self-cleaning function
works.
Emptying the dust container (Fig. 34)
Empty the dust container at the latest
when the dust has reached the Max.
marking on the dust container.
Advertisement
Chapters
Table of Contents
