Summary of Contents for Lenovo IdeaPad 5 Pro 14IAP7
Page 1
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Lenovo IdeaPad 5 Pro 14IAP7 i5-1240P 16GB 512GB (82SH004NIX) o cerca il tuo prodotto tra le migliori offerte di Notebook Lenovo IdeaPad 5i Pro (14″,7) and Lenovo IdeaPad 5 Pro (14″, 7) Hardware Maintenance Manual...
This guide addresses only those items. You should use good judgment to identify potential safety hazards due to attachment of non-Lenovo features or options not covered by this inspection guide.
4. Check for cracked or bulging batteries. 5. Remove the cover. 6. Check for any obvious non-Lenovo alterations. Use good judgment as to the safety of any non-Lenovo alterations. 7. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage.
• English • Arabic • Brazilian Portuguese • French • German • Hebrew • Japanese • Korean • Spanish • Traditional Chinese DANGER DANGER DANGER Lenovo IdeaPad 5i Pro (14″,7) and Lenovo IdeaPad 5 Pro (14″, 7) Hardware Maintenance Manual...
Table 2. Model: IdeaPad 5 Pro 14IAP7 (Machine type: 82SH) Type ac power adapter self-service power cord self-service Lenovo IdeaPad 5i Pro (14″,7) and Lenovo IdeaPad 5 Pro (14″, 7) Hardware Maintenance Manual...
Chapter 3. Identifying FRUs (CRUs) Locate FRUs and CRUs The exploded illustrations help Lenovo service technicians identify FRUs or CRUs that they may need to replace when servicing a customer’s computer. Figure 1. Exploded view Table 3. FRU (CRU) categories...
Page 30
I/O bracket Heat sink (for AMD UMA models) Heat sink (for Intel DIS models) Power cord ac power adapter Screw kit * for selected models Lenovo IdeaPad 5i Pro (14″,7) and Lenovo IdeaPad 5 Pro (14″, 7) Hardware Maintenance Manual...
Chapter 4. Removing a FRU or CRU Service tools The following table lists tools for servicing Lenovo computers. Tools with a cross mark are needed for serving the product models as described by this publication. Prepare them before you service the product.
Make sure the computer has been shut down before servicing the computer. Step 1. Place the computer upside down on a flat surface. Step 2. Remove six screws. Figure 4. Remove six screws Lenovo IdeaPad 5i Pro (14″,7) and Lenovo IdeaPad 5 Pro (14″, 7) Hardware Maintenance Manual...
Step 3. Pry up the latches and remove the lower case. Figure 5. Pry up the latches and remove the lower case Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: Lower case Remove the battery pack Make sure the following FRUs (or CRUs) have been removed.
Disconnect the battery pack cable from the system board and remove one screw. Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable. Lenovo IdeaPad 5i Pro (14″,7) and Lenovo IdeaPad 5 Pro (14″, 7) Hardware Maintenance Manual...
Page 39
Remove the solid-state drive by pulling it away from the slot. Figure 8. Remove the solid-state drive Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement part: M.2 2280 solid-state drive Chapter 4 Removing a FRU or CRU...
Figure 9. Disconnect the battery pack cable and remove one screw and the solid-state drive and bracket Screw specifications Number of screws M2 × L2 Step 2. Remove one screw and then remove the solid-state drive. Lenovo IdeaPad 5i Pro (14″,7) and Lenovo IdeaPad 5 Pro (14″, 7) Hardware Maintenance Manual...
Figure 10. Remove one screw and the solid-state drive Screw specifications Number of screws M2 × L2 Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: M.2 2242 solid-state drive M.2 2242 solid-state drive bracket Remove the Wi-Fi card Make sure the following FRUs (or CRUs) have been removed.
Page 42
Number of screws Screw specifications M2 × L2 Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: Wi-Fi card WLAN mylar Lenovo IdeaPad 5i Pro (14″,7) and Lenovo IdeaPad 5 Pro (14″, 7) Hardware Maintenance Manual...
Remove the fan Make sure the following FRUs (or CRUs) have been removed. “Remove the lower case” on page 30 Step 1. Disconnect the battery pack cable and the fan cable from the system board. Then, peel off the WLAN mylar and disconnect the wireless antennas from the Wi-Fi card. Figure 13.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable. Figure 15. Disconnect the battery cable and peel off the thermal mylar Step 2. Remove three screws and remove the heat sink. Lenovo IdeaPad 5i Pro (14″,7) and Lenovo IdeaPad 5 Pro (14″, 7) Hardware Maintenance Manual...
Figure 16. Remove three screws and the heat sink Screw specifications Number of screws M2 × L4 Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: Heat sink Thermal mylar Remove the heat sink (for Intel DIS models) Make sure the following FRUs (or CRUs) have been removed.
Page 46
Number of screws M2 × L4 Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement part: Heat sink Thermal mylar Lenovo IdeaPad 5i Pro (14″,7) and Lenovo IdeaPad 5 Pro (14″, 7) Hardware Maintenance Manual...
Remove the speakers Make sure the following FRUs (CRUs) have been removed. “Remove the lower case” on page 30 Step 1. Disconnect the battery pack cable from the system board. Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable. Figure 19.
Figure 21. Disconnect the battery pack cable Step 2. Disconnect the USB board cable from the USB board. Then, remove four screws and lift the left hinge. Lenovo IdeaPad 5i Pro (14″,7) and Lenovo IdeaPad 5 Pro (14″, 7) Hardware Maintenance Manual...
Page 49
M2 × L4 M2.5 × L4 Step 3. Remove the USB board. Figure 23. Remove the USB board Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: USB board Chapter 4 Removing a FRU or CRU...
Disconnect the battery pack cable from the system board. Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable. Lenovo IdeaPad 5i Pro (14″,7) and Lenovo IdeaPad 5 Pro (14″, 7) Hardware Maintenance Manual...
Page 51
Figure 26. Remove two screws and the I/O bracket Screw specifications Number of screws M2 × L4 Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement parts: I/O bracket Chapter 4 Removing a FRU or CRU...
EDP cable. Then, disconnect the USB board cable from the USB board. Figure 27. Disconnect cables Step 2. Remove six screws and lift up the right hinge. Then, remove the system board. Lenovo IdeaPad 5i Pro (14″,7) and Lenovo IdeaPad 5 Pro (14″, 7) Hardware Maintenance Manual...
Page 53
Disconnect the USB board cable from the system board and remove the USB board cable. Figure 29. Disconnect the USB board cable and remove the USB board cable Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement part: System board USB board cable...
EDP cable. Then, disconnect the USB board cable from the USB board. Figure 30. Disconnect cables Step 2. Remove six screws and lift up the right hinge. Then, remove the system board. Lenovo IdeaPad 5i Pro (14″,7) and Lenovo IdeaPad 5 Pro (14″, 7) Hardware Maintenance Manual...
Page 55
Disconnect the USB board cable from the system board and remove the USB board cable. Figure 32. Disconnect the USB board cable and remove the USB board cable Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement part: System board USB board cable...
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable. Figure 33. Disconnect the battery pack cable Step 2. Disconnect antennas and EDP cable from the system board. Lenovo IdeaPad 5i Pro (14″,7) and Lenovo IdeaPad 5 Pro (14″, 7) Hardware Maintenance Manual...
Page 57
Figure 34. Disconnect antennas and EDP cable Step 3. Remove six screws. Then, rotate the LCD module to an angle of about 90 degrees and place the computer on a flat surface. Figure 35. Remove six screws and rotate the LCD module to an angle of about 90 degrees Screw specifications Number of screws M2.5 ×...
Disconnect the battery pack cable from the system board. Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable. Lenovo IdeaPad 5i Pro (14″,7) and Lenovo IdeaPad 5 Pro (14″, 7) Hardware Maintenance Manual...
Page 59
Figure 37. Disconnect the battery pack cable Step 2. Disconnect antennas and EDP cable from the system board. Figure 38. Disconnect antennas and EDP cable Step 3. Remove six screws. Then, rotate the LCD module to an angle of about 90 degrees and place the computer on a flat surface.
Page 60
Figure 40. Remove the upper case assembly Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement part: Upper case assembly Lenovo IdeaPad 5i Pro (14″,7) and Lenovo IdeaPad 5 Pro (14″, 7) Hardware Maintenance Manual...
Slide the hinge cover to left side and remove the hinge cover. Figure 41. Slide the hinge cover to left side and remove the hinge cover Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part:...
Page 62
Screw specifications Number of screws M1.6 × L4.5 Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: Strip cover Lenovo IdeaPad 5i Pro (14″,7) and Lenovo IdeaPad 5 Pro (14″, 7) Hardware Maintenance Manual...
Remove the LCD bezel (for non-touch models) Make sure the following FRUs (or CRUs) have been removed. “Remove the lower case” on page 30 “Remove the upper case assembly (for AMD UMA models)” on page 50 “Remove the upper case assembly (for Intel DIS models)” on page 52 “Remove the hinge cover”...
“Remove the hinge cover” on page 55 “Remove the strip cover (for touch models)” on page 55 Step 1. Pull out the removable tapes. Then, lift the LCD panel. Lenovo IdeaPad 5i Pro (14″,7) and Lenovo IdeaPad 5 Pro (14″, 7) Hardware Maintenance Manual...
Lift up the mylar and disconnect the EDP cable from LCD panel. Then, remove the LCD panel. Figure 47. Lift up the mylar and disconnect the EDP cable. Then, remove the LCD panel Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement part: LCD panel Removable tape Remove the LCD panel (for non-touch models) Make sure the following FRUs (or CRUs) have been removed.
Page 66
Figure 49. Lift up the mylar and disconnect the EDP cable. Then, remove the LCD panel Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement part: Lenovo IdeaPad 5i Pro (14″,7) and Lenovo IdeaPad 5 Pro (14″, 7) Hardware Maintenance Manual...
Figure 50. Remove six screws and the hinges Screw specifications Number of screws M2 × L2 Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: Hinge Remove the hinges (for non-touch models) Make sure the following FRUs (or CRUs) have been removed.
“Remove the LCD panel (for touch models)” on page 58 “Remove the LCD panel (for non-touch models)” on page 59 Step 1. Open the latch and remove the EDP cable. Lenovo IdeaPad 5i Pro (14″,7) and Lenovo IdeaPad 5 Pro (14″, 7) Hardware Maintenance Manual...
Figure 52. Open the latch and remove the EDP cable Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement part: EDP cable Remove the microphone rubbers Make sure the following FRUs (or CRUs) have been removed.
“Remove the LCD panel (for non-touch models)” on page 59 “Remove the microphone rubbers” on page 63 Step 1. Disconnect the camera cable from the camera board and remove the camera board. Lenovo IdeaPad 5i Pro (14″,7) and Lenovo IdeaPad 5 Pro (14″, 7) Hardware Maintenance Manual...
Figure 54. Disconnect the camera cable and remove the camera board Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement part: Camera board Remove the camera cable Make sure the following FRUs (or CRUs) have been removed.
“Remove the camera board” on page 64 “Remove the camera cable” on page 65 Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement part: LCD cover Lenovo IdeaPad 5i Pro (14″,7) and Lenovo IdeaPad 5 Pro (14″, 7) Hardware Maintenance Manual...
Page 74
Table 7. All base cover labels (continued) Israel/US/CA/TW 32 mm × 10 mm Brazil 35 mm × 15 mm Lenovo IdeaPad 5i Pro (14″,7) and Lenovo IdeaPad 5 Pro (14″, 7) Hardware Maintenance Manual...