Table of Contents
Advertisement
10.21 NTC sensor
Remove the sensor from the seal and detach the
connector.
10.22 Drum rotation motor
Detach the connector.
Cut the clamp which fix the capacitor and detach it.
Remove the belt tensioner spring.
Free the belt.
Remove the two screws which secure the motor sup-
port to the base.
Lift it up and extract the motor support unit and the
motor still assembled.
Remove the screws which secure the brackets and
remove the motor.
Note for replacing the belt tensioner roller / drive belt
1. Spacer.
2. Belt tensioner roller with with incorporated spacer.
3. Elastic ring.
4. Belt in central position.
5. Leave two grooves free on each side of the pul-
ley.
- ADL
52/58
599 70 84 17
Advertisement
Table of Contents
