Table of Contents
Advertisement
Quick Links
Cisco Aironet Omnidirectional Mast Mount
Antenna (AIR-ANT2506)
This document outlines the specifications, describes the omnidirectional mast mount antenna, and
provides instructions for mounting it. Designed for WLAN applications in the 2.4- to 2.5-GHz frequency
range, the antenna has a nominal gain of 5.2 dBi and is typically mounted indoors or outdoors on a mast.
The antenna is compatible with Cisco Aironet radio products utilizing a reverse polarity TNC (RP-TNC)
connector.
The following information is provided in this document.
Technical Specifications, page 2
•
System Requirements, page 2
•
Installation Notes, page 3
•
Safety Precautions, page 7
•
Obtaining Documentation and Submitting a Service Request, page 8
•
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Advertisement
Table of Contents
Related Manuals for Cisco Aironet AIR-ANT2506
Summary of Contents for Cisco Aironet AIR-ANT2506
- Page 1 Designed for WLAN applications in the 2.4- to 2.5-GHz frequency range, the antenna has a nominal gain of 5.2 dBi and is typically mounted indoors or outdoors on a mast. The antenna is compatible with Cisco Aironet radio products utilizing a reverse polarity TNC (RP-TNC) connector.
-
Page 2: Technical Specifications
(29.2 cm x 2.8 cm) Mounting Mast, 2 in (5.08 cm) maximum 81017 E-Plane Pattern H-Plane Pattern System Requirements This antenna is compatible with any 2.4-GHz Cisco Aironet radio device with an RP-TNC connector. Cisco Aironet Omnidirectional Mast Mount Antenna (AIR-ANT2506) 78-14722-03... -
Page 3: Installation Notes
Carefully connect the antenna and mast assembly to its mounting bracket and tighten the clamp bolts. In the case of a a guyed installation, you must have at least one assistant to hold the mast upright while the guy wires are attached and tightened to the anchor bolts. -
Page 4: Choosing A Mounting Location
Generally, the higher your antenna is above the ground, the better it performs. Good practice is to install your antenna about 5 to 10 feet (1.5 to 3 meters) above the roof line and away from all power lines and obstructions. -
Page 5: Mounting The Antenna
Installation Notes This list does not include the tools and equipment required to assemble and erect the tower, mast, or other Note structure you intend to mount your antenna on. The following sections contain procedures for installing the antenna. Choose the procedure that applies to your situation. -
Page 6: Suggested Cable
Antenna Drain Details Drain ring Antenna cable Align the antenna so that the metal base is even with or above the top of the mast tubing. Step 2 Tighten the hose clamp until the antenna is secure on the mast. -
Page 7: Safety Precautions
Each person should be assigned to a specific task, and should know what to do and when to do it. One person should be in charge of the operation to issue instructions and watch for signs of trouble. -
Page 8: Obtaining Documentation And Submitting A Service Request
Cisco currently supports RSS Version 2.0. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.