Table of Contents
Advertisement
Disassembly Notice
Step 1 : Disconnect the (yellow mark) connectors then remove USB FFC.
Step 2 : Remove the screw*1pc then remove USB BOARD.
1
2
The device has an Ambient Light Sensor (ALS) for power-off protection Function.
Remove
USB BOARD
Screws
QTY
Spec
1
SCREW M2*3L (5.6,0.8) (K) #1
Torque (kgf-cm)
2.0 ± 0.2
18
Back
Advertisement
Table of Contents
