SSC-C370/C370P
SECTION 1
GENERAL
1-1. FEATURES
The SSC-C370/C370P color video cameras use a 1/2-inch CCD (Charge
Coupled Device) with 768 (UC)/752 (EK) (horizontal) by 494 (UC)/582 (EK)
(vertical) picture elements. The following are some of its principal features.
High sensitivity
Gives a clear picture even under very gloomy conditions.
CCD IRIS tunction
Even when a manual iris tens is fitted, the sensitivity is automatically
adjusted according to the incident light level. This keeps the video signal at
a suitable level.
Automatic adjustment of white balance
The automatic adjustment mode stores the adjusted value; alternatively the
automatic tracing mode responds to the lighting conditions to adjust the
white balance automatically. Thus a picture with an appropriate color
balance is always obtained.
Electronic shutter function
Eight shutter speeds are available, for various shooting conditions.
External synchronization
A number of cameras can be synchronized with the same reference
synchronizing signal so that they can be controlled by a video switcher; you
can switch from a camera to another without causing picture distortion on
the monitor screen.
Combined power cable (using YS-W130/W130P/W230/W230P camera
adaptor)
A single 75-ohm coaxial cable (not supplied) connecting the camera to a YS-
W130/W130P/W230/W230P camera adaptor (not supplied) carries the video
output signal, as well as the power supply input and external synchronizing
signal.
Auto-iris lenses
A C-mount auto-iris lens can be used, by connecting the lens cable with the
plug supplied.
:
1-1
1-2. NOTES ON USE
Power supply
This unit must always be operated with a 12 V DC power supply, or using the
YS-W130/W130P/W230/W230P camera adaptor (not supplied).
Handling of the unit
Be careful not to spill water or other liquids on the unit, or to get
combustible or metallic material inside the body. If used with foreign matter
inside, the camera is liable to fail, or be a cause of fire or electric shock.
Operating and storage tocations
Avoid shooting a very bright object (such as light fittings) for an extended
period. Avoid operating or storing the unit in the following locations.
© Extremely hot or cold piaces (operating temperature ~10°C to 50°C; 14°F
to 122°F)
© Damp or dusty places
« Where it is exposed to rain
* Locations subject to strong vibration
© Close to generators of powerful electromagnetic radiation such as radio
or TV transmitters
Care of the unit
¢ Remove dust or dirt on the surface of the lens or optical filter with a
blower.
¢ Clean the body with a dry soft cloth. If it is very dirty, use a cloth
dampened with a small quantity of neutral detergent, then wipe dry. Avoid
the use of volatile solvents such as thinners, alcohol, benzene, and
insecticides. They may damage the surface finish, or impair the operation
of the camera.
in the event of any problems with the operation of the camera, contact your
Sony service representative.