Table of Contents
Advertisement
welcome
Dear customer
Congratulations on your choice of a Beko quality washing machine
which has been designed to give you lasting service.
Please read these instructions thoroughly before installing or using
- and keep for handy reference. Make sure you understand the
controls prior to using your appliance. The washer must only be used
for its intended purpose, ie the washing of clothes in the home.
Failure to observe these instructions may invalidate your right to free
service during the guarantee period.
If you have any questions, or if you are not sure about any
information contained in this booklet please contact us - details are
on the back cover.
Beko Customer Service
Notes
Due to the quality control processes during production, there
may be some water left in your machine. This does not cause
any damage.
Note that temperatures in this book are for guidance only. Always
check the clothing labels before selecting your wash program
2
Advertisement
Table of Contents
Related Manuals for Beko WMA510
Summary of Contents for Beko WMA510
- Page 1 Failure to observe these instructions may invalidate your right to free service during the guarantee period. If you have any questions, or if you are not sure about any information contained in this booklet please contact us - details are on the back cover.
-
Page 2: Table Of Contents
Introduction Welcome Installation Know your washing machine/specification Location Installation Electrical connection Operating How to use Programme descriptions Function buttons ITCL fabric care symbols Machine care Care & maintenance Before calling service/trouble shooting Guarantee Service... -
Page 3: Know Your Washing Machine/Specification
Indicator light specification Capacity (dry fabric) 5 kg Because we continually strive to improve our products, we may change our specifications Dimensions width x depth x height and designs without prior notice. 60cm x 54cm x 85cm Net weight 62kg... -
Page 4: Location
The electrical away from rain, damp places and water) as components of the machine may overheat and long as you have hot and cold water supply, may cause damage. drainage and electrical connection alongside. Please ensure the power, water supplies... - Page 5 The drain hose should be placed and secured In order to prevent any water leakage and either at the side of the sink A, directly to the damage, turn off the water taps when not in drain B or directly to the waste water use.
-
Page 6: Electrical Connection
Connect the brown (live) wire to the terminal in the plug marked ‘L’ or coloured red. With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the Electrical requirements main fuse box. If in doubt contact a qualified Before you insert the plug into the wall electrician. -
Page 7: How To Use
10. Warning! Always switch off the machine before selecting your wash programme. 1 Press in the middle of the knob to release the child safe programme selection knob. 2 Turn the programme selection knob clockwise and bring the programme number required in line with the programme selection indicator. - Page 8 Stains can remain if low quality detergents are used. 1, 2, 3, 4, 5 and A programmes end on the line after A. • Only use powders specific for automatic 6, 7, 8, 9 and B programmes, if rinse hold washers, otherwise over foaming and poor washing performance will be experienced.
-
Page 9: Programme Descriptions
*:Energy Labelling program acc. to EN 60456:1999 ve IEC 60456 Ed.4 2001 Depending on water, textile and ambient conditions the actual values given on or with the machine can deviate from the declared standard values, as they are tested according to the laboratory conditions. -
Page 10: Function Buttons
Rinse hold button again or select D on the programme selection knob to drain the water. If there is a power failure or if for any reason the machine is disconnected from the mains supply, the programme must... -
Page 11: Care & Maintenance
Then, disconnect the hose and clean the COLD filter with a thin brush. If the filter is very dirty, you may clean it by pulling out with pliers. To clean the filter at the tap side of the hose, pull it out by hand and clean the filter under tap water. - Page 12 Turn the opening of kick plate screws 90° with the help of a screw driver or a coin. Place a little pan in front of the filter door to catch the small amount of water spilling from the machine.
-
Page 13: Before Calling Service/Trouble Shooting
Check whether the drain hose is bent or not. If there is a need to clean the pump filter, refer to the pump filter cleaning section on page 13.