Table of Contents
Advertisement
5 SERVICE MODE LUX (2021)
Activate service mode: The appliance is in off-state.
Attention:
1. The water tank must be empty!
2. The Service Mode can be cancelled in any steps (unplug and re-plug the appliance), except after exchanging of the user interface!
1. Unplug and re-plug the appliance from the main power supply.
2. The user interface will reboot.
3. Afterwards, touch the "Fast heat up"-key and the "Light"-key
simultaneously for 5 seconds.
Q&CI - Technical Support
4. The user interface will reboot.
5. Display and LED bar check.
6. Key test + Software Versions
Turn the selector anti-clockwise
to view the codes.
Touch the key to continue !
•
Firmware UI LUX
•
Configuration UI LUX
•
Power board OVC-R5000
•
Firmware NIU5
21
S00005494--8...
S00005487--8...
S00005679--A...
S00006100--A...
599 844 - 908
Rev. 01
Advertisement
Table of Contents
