Before Using the Remote Control
With this Remote Control,
you can operate your TV and
most models of remote-controlled
VCR's and cable
boxes even if they are different
brands.
However, this Remote Control
must be programmed
to
control other brands of VCR's and/or cable boxes. See
page 29. If you will be using your TV set with a Toshiba
VCR, your Remote Control
has already been prepro-
grammed
for you.
Further, this Remote Control
is capable of learning
operating
codes from most infrared
remote control
transmitters.
See page 32.
• Before attempting
to operate your Remote Control,
install the batteries according
to "Installing
and
replacing
batteries"
(see below).
Place the Remote Control with the face down.
Press
down on the ridged area of the battery cover and
slide it off.
_
Press and slide to remove.
Place two "AA"
size alkaline batteries,
matching
the +
and - signs on each battery to the + and - signs of the
battery compartment.
3
Replace the battery
cover until the lock snaps.
Notes:
• After installing
new batteries,
the Remote Control will
_O_
set itself to the codes for Toshiba's
IV and VCR. If you
are using the Remote Control to operate equipment
that uses different
codes, it will have to be repro-
grammed
for those codes,
uJ_+
Iz::
• This Remote Control may have functions not available
_n_,_
on the original
remote controls
of your VCR and cable
....
box.
These functions
may or may not operate your VCR or
cable box. Refer to the owner's
manuals supplied
with
the equipment
to see which functions
are available.
• The remote control supplied
with your VCR or cable
box may have keys not duplicated
on this Remote
Control, If these functions
are desired, the original
remote control
will have to be used.
CAUTIONS:
• Do not throw
your batteries
into a fire. Dispose of your
batteries
in a designated
disposal
area.
• Do not combine
used old batteries with new ones.
• Do not mix battery types.
Tips for best operation
• For optimum
performance,
aim the Remote Control
directly
at the TV from a distance no more than 16 ft
(5m) and be sure there is no obstruction
between the
Remote Control and the TV.
• If your Remote Control does not always adjust the TV
as you wish, you probably
need to replace the batter-
ies.
Use alkaline
batteries for longer use.
• Remove dead batteries immediately
to prevent battery
acid from leaking into the battery compartment.
• If you do not intend to use the Remote Control for a
long period, remove the batteries.
4_
€
o
O
E
4-J
cn
P
o
-$
rn
.o
+-
O
O
E
hr.
o
c-
o
c-
o
o
27