Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
42"
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2023 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
DOUBLE BANK
ROLLER CABINET
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
58723 70367 70368 70371 70372 70363 70370 70373
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
23e
Advertisement
Related Manuals for U.S. General 3 Series
Summary of Contents for U.S. General 3 Series
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
- Page 2 Specifications Total Combined Weight Capacity 2600 lb (evenly distributed from bottom up.) Drawer Capacity 120 lb (per connected pair of slides) Page 2 For technical questions, please call 1-888-866-5797. Roller Cabinet...
- Page 3 IMPORTANT SAFETY INFORMATION Assembly Precautions 1. Assemble only according to these instructions. 5. Do not assemble when tired or when under the Improper assembly can create hazards. influence of alcohol, drugs or medication. 2. Wear ANSI-approved safety goggles and 6. Weight capacity and other product capabilities apply heavy-duty work gloves during assembly.
- Page 4 Assembly Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. 1. Assemble on a flat, level, hard and smooth surface 2. Attach Handle (2) to either side of Cabinet using capable of safely supporting a fully loaded Cabinet.
- Page 5 Connecting Cabinets Cabinet B Cabinet A 1. Empty all Drawers from Cabinets. 2. Remove all attachments from Cabinets. 3. Assemble on solid flat surface. 4. Remove Top Drawers from Cabinets. install Bolts 5. Remove two Handle Screws (3) from here Handle (2) from Cabinet A.
- Page 6 1. Place two M8x35 Bolts (20) through holes 2. With Cabinets connected, remove eight Bolts (5) underneath Cabinets from one Cabinet to the other from two Fixed Casters (9) on Cabinet B. Cabinet. Secure Bolts with M8 Nuts (21) and tighten. 3.
- Page 7 Operation Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. 1. Empty all Drawers. 4. Move using supplied handle on Bottom Cabinet only to prevent tipping.
- Page 8 Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If any part becomes damaged, have the problem corrected before further use. 1.
- Page 9 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
- Page 10 Parts List and Diagram Parts List Part Description Part Description Top Liner Drawer Trim 2 Handle Drawer Trim 3 Handle Screw M6x25 Bolt Swivel Locking Caster M6 Nut Hardware For Casters M8x35 Bolt Ball Bearing Slide M8 Nut Latch Drawer Drawer Trim 1 Drawer Fixed Caster...
- Page 11 Assembly Diagram Roller Cabinet For technical questions, please call 1-888-866-5797. Page 11...
- Page 12 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.