Page 2
Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes...
CAUTION for Accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet.
Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.
Page 5
Guidelines for safe battery usage This notebook uses a Lithium-ion battery. Do not use it in a humid, wet or corrosive environment. Do not put, store or leave your product in or near a heat...
The capacity and lifetime of the battery will be reduced if the battery is left in hot or cold places, such as in a closed car in summer or winter. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged.
(WLAN), Bluetooth and/or 3G. Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions.
For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed, and the air bag inflates, serious injury could result.
Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal...
Tips and information for comfortable use Computer users may complain of eyestrain and headaches after prolonged use. Users are also at risk of physical injury after long hours of working in front of a computer. Long work periods, bad posture, poor work habits, stress, inadequate working conditions, personal health and other factors greatly increase the risk of physical injury.
• Keep your display clean. • Keep your head at a higher level than the top edge of the display so your eyes point downward when looking at the middle of the display. • Adjust the display brightness and/or contrast to a comfortable level for enhanced text readability and graphics clarity.
Federal Communications Comission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 13
Is compliant with the essential requirements and other relevant provisions of the following EC directives, and that all the necessary steps have been taken and are in force to assure that production units of the same product will continue comply with the requirements.
First things first We would like to thank you for making an Acer notebook your choice for meeting your mobile computing needs. Your guides To help you use your Acer notebook, we have designed a set of guides: A handy Quick Guide is useful for quick glances at functional key combinations.
• Do not connect the adapter to any other device. • Do not step on the power cord or place heavy objects on top of it. Carefully route the power cord and any cables away from foot traffic. • When unplugging the power cord, do not pull on the cord itself but pull on the plug.
Taking care of your battery pack Here are some ways to take care of your battery pack: • Use only batteries of the same kind as replacements. Turn the power off before removing or replacing batteries. • Do not tamper with batteries. Keep them away from children.
Declaration of Conformity xiii First things first Your guides Basic care and tips for using your computer Turning your computer on and off Taking care of your computer Taking care of your AC adapter Taking care of your battery pack...
Page 20
Getting to know your VoIP phone LED indicators Charging the phone Connecting the phone to your notebook Using the phone Ejecting the optical (CD or DVD) disk Using a computer security lock Audio Adjusting the volume Using Dolby Home Theater for surround/...
Page 21
Battery-low warning Taking your notebook PC with you Disconnecting from the desktop Moving around Preparing the computer What to bring to meetings Taking the computer home Preparing the computer What to take with you Special considerations Setting up a home office...
Page 22
FCC notice Modem notices Laser compliance statement LCD pixel statement Macrovision copyright protection notice Radio device regulatory notice General European Union (EU) The FCC RF safety requirement Canada — Low-power license-exempt radio communication devices (RSS-210) LCD panel ergonomic specifications Index...
Acer Empowering Technology The Empowering Technology toolbar makes it easy for you to access frequently used functions and manage your new Acer system. Displayed by default in the upper half of your screen, it provides access to the following utilities: Note: All of the following content is for general reference only.
Acer eNet Management Acer eNet Management helps you quickly connect to both wired and wireless networks in a variety of locations. To access this utility, select "Acer eNet Management" from the Empowering Technology toolbar or run the program from the Acer Empowering Technology program group in Start menu. You can...
Page 25
Acer eNet Management can save network settings for a location to a profile, and automatically switch to the appropriate profile when you move from one location to another. Settings stored include network connection settings (IP and DNS settings, wireless AP details, etc.), as well as default printer settings.
You can create, switch between, edit, delete and restore power plans, as described below. View and adjust settings for On Battery and Plugged In modes by clicking the appropriate tabs. You can open Windows power options by clicking "More Power Options".
Click "Apply" to save your new settings. To delete a power plan: You cannot delete the power plan you are currently using. If you want to delete the active power plan, switch to another one first. Select the power plan you wish to delete from the drop-down list.
Acer eAudio Management Acer eAudio Management allows you to easily control the enhanced sound effects of Dolby® Home Theater™ on your system. Select "Movie" or "Game" mode to experience the awesome realism of 5.1-channel surround sound from just 2 speakers, via Dolby Virtual Speaker technology. "Music" mode lets you...
Acer ePresentation Management Acer ePresentation Management lets you project your computer's display to an external display device or projector using the hotkey: <Fn> + <F5>. If auto- detection hardware is implemented in the system and the external display supports it, your system display will be automatically switched out when an external display is connected to the system.
The Acer eDataSecurity Management setup wizard will prompt you for a supervisor password and default encryption password. This password will be used to encrypt files by default, or you can choose to enter your own password when encrypting a file.
Note: The password used to encrypt a file is the unique key that the system needs to decrypt it. If you lose the password, the supervisor password is the only other key capable of decrypting the file. If you lose both passwords, there will be no way to...
Page 32
To use Acer eLock Management, the Empowering Technology password must be set first. Once set, you can apply locks to any of the devices types. Lock(s) will immediately be set without any reboot necessary, and will remain after rebooting, until removed.
Acer eRecovery Management Acer eRecovery Management is a versatile backup utility. It allows you to create full or incremental backups, burn the factory default image to optical disc, and restore from previously created backups or reinstall applications and drivers. By default, user-created backups are stored to the D:\ drive.
Page 34
Note: If your computer did not come with a Recovery CD or System CD, please use Acer eRecovery Management's "System backup to optical disc" feature to burn a backup image to CD or DVD. To ensure the best results when recovering your system...
Acer eSettings Management Acer eSettings Management allows you to inspect hardware specifications, set BIOS passwords and modify boot options. Acer eSettings Management also: • Provides a simple graphical user interface for navigation. • Prints and saves hardware specifications. • Lets you set an asset tag for your system.
Windows Mobility Center The Windows Mobility Center collects key mobile-related system settings in one easy-to-find place, so you can quickly configure your Acer system to fit the situation as you change locations, networks or activities. Settings include display brightness, power plan, volume, wireless networking on/off, external display settings, display orientation and synchronization status.
A Ferrari tour After setting up your computer, let us show you around your new Ferrari computer. System Top view...
Page 38
Touchpad Touch-sensitive pointing device which functions like a computer mouse. Click buttons The left and right buttons function like the (left and right) left and right mouse buttons. Status indicators Light-Emitting Diodes (LEDs) that light up to show the status of the computer's functions and components.
Closed front view Icon Item Description Speakers Left and right speakers deliver stereo audio output. 4-pin IEEE 1394 port Connects to IEEE 1394 devices. Line-in jack Accepts audio line-in devices (e.g., audio CD player, stereo walkman). Microphone-in jack Accepts input from external microphones.
Left view Icon Item Description Ventilation slots Enable the computer to stay cool, even after prolonged use. Ethernet (RJ-45) Connects to an Ethernet 10/100-based port network. 2 USB 2.0 ports Connect to USB 2.0 devices (e.g., USB mouse, USB camera).
Accepts Memory Stick (MS), Memory Stick PRO (MS PRO), MultiMediaCard (MMC), Secure Digital (SD) and xD- Picture Card (xD) (manufacturing option). Note: Only one card can operate at any given time. USB 2.0 port Connect to USB 2.0 devices (e.g., USB mouse, USB camera).
Rear view Icon Item Description Kensington lock slot Connects to a Kensington-compatible computer security lock. External display Connects to a display device (e.g., external (VGA) port monitor, LCD projector). S-video/TV-out Connects to a television or display device (NTSC/PAL) port with S-video input.
Houses the computer's battery pack. Battery lock Locks the battery in position. Memory compartment Houses the computer's main memory. Hard disk bay Houses the computer's hard disk (secured with screws). 154-pin Acer ezDock II/ Connects to Acer ezDock. II+ connector Battery release latch...
Bluetooth optical mouse Front view Item Description Left click button Press the left button to perform selection and execution functions. Scroll wheel To scroll up or down a page. Right click button Press the right button to perform selection and execution functions.
Cancel button Hang up the call. Hold for at 2 seconds to power on/off. Function button Hold for least 3 seconds to enable BT pairing Switch between headset or hands-free after the call is accepted. OK button Answer an incoming call.
Acer SignalUp wireless technology System memory • Dual-channel DDR2 SDRAM support • Up to 2 GB of DDR2 667 MHz memory, upgradeable to 4 GB using two soDIMM modules Display ™ • 12.1" WXGA (200-nit) Acer CrystalBrite...
Page 48
LAN: Gigabit Ethernet, Wake-on-LAN ready • Modem: 56K ITU V.92 with PTT approval, Wake-on- Ring ready Dimensions • 304 (W) x 228 (D) x 34 (H) (mm) (11.97 x 8.98 x 1.33 inches) Power • ACPI 3.0 CPU power management standard: supports subsystem Standby and Hibernation power-saving modes •...
Page 49
Kensington lock slot Options and • Acer ezDock II accessories • Acer ezDock II+ • Acer Xpress VoIP phone and Acer Video Conference Manager pack • 512 MB/1 GB/2 GB DDR2 667 MHz soDIMM module • 3-pin 65 W AC adapter...
Page 50
DMI 2.0 Warranty One-year International Travelers Warranty (ITW) Note: The specifications listed above are for reference only. The exact configuration of your PC depends on the model purchased. Warning! For safety reasons, do not use non-compliant parts when adding or changing components. Consult your reseller for...
Indicators The computer has serveral easy-to-read status indicators. The front panel indicators are visible even when the computer cover is closed Icon Function Description Power Indicates the computer's power status. Battery Indicates the computer's battery status. Bluetooth Indicates the status of Bluetooth communication.
> to run the Acer Empowering Technology. Please see "Acer Empowering Technology" on page 1. The mail and Web browser buttons are pre-set to email and Internet programs, but can be reset by users. To set the Web browser, mail and programmable buttons, run the Acer Launch Manager.
Touchpad The built-in touchpad is a pointing device that senses movement on its surface. This means the cursor responds as you move your finger across the surface of the touchpad. The central location on the palmrest provides optimum comfort and support.
Press the left (1) and right buttons located beneath the touchpad to perform selection and execution functions. These two buttons are similar to the left and right buttons on a mouse. Tapping on the touchpad is the same as clicking the left button.
Page 55
Note: When using the touchpad, keep it — and your fingers — dry and clean. The touchpad is sensitive to finger movement; hence, the lighter the touch, the better the response. Tapping harder will not increase the touchpad's responsiveness.
A better solution would be to connect an external keypad. Scroll Lock When Scroll Lock is on, the screen moves one line up or down when you press the up or down arrow keys respectively. Scroll Lock does not <Fn> + <F12>...
Windows key Pressed alone, this key has the same effect as clicking on the Windows Start button; it launches the Start menu. It can also be used with other keys to provide a variety of functions: < > : Open or close the Start menu <...
The computer employs hotkeys or key combinations to access most of the computer's controls like screen brightness, volume output and the BIOS utility. To activate hotkeys, press and hold the <Fn> key before pressing the other key in the hotkey combination.
<Fn> + < > Brightness down Decreases the screen brightness. Special keys You can locate the Euro symbol and the US dollar sign at the upper-center and/or bottom-right of your keyboard. The Euro symbol Open a text editor or word processor.
Mouse is now in pairing mode and is ready to connect to your computer. Click the "Add" button from Bluetooth Devices. Check the "My device is set up and ready to be found" box. Then click" Next". The Acer mouse will be discovered. Click on the Acer mouse icon, and then click "Next".
1. Turn the notebook on. 2. Locate the Express Card/54 slot. 3. Insert the phone to the slot label up. Make sure that the phone is completely pushed on the slot. Note: The notebook detects the device and displays a New Device...
Bluetooth Headset List with a New status. Otherwise, any previously paired Bluetooth headset device shows "Read to Use". 4. Click the Acer Xpress VoIP phone from the list, then click Connect. Acer VCM automatically pairs the phone to the notebook, then changes the phone status...
Page 64
Note: Click "Rescan" if the Acer Xpress VoIP phone does not appear on the list. After pairing, Acer VCM automatically connects the phone to the notebook each time you turn the phone on. There is no need to connect the phone again.
Note: You can only receive/answer Internet calls through the phone when it is linked to the notebook. Every time you turn the phone on, Acer VCM automatically links it to the notebook. When linked, the Bluetooth connection/pairing indicator on the phone blinks slowly.
Wrap the computer security lock cable around an immovable object such as a table or handle of a locked drawer. Insert the lock into the notch and turn the key to secure the lock. Keyless models are also available.
The computer comes with 32-bit High-Definition audio, and Dolby certified surround sound system with two built-in stereo speakers. Adjusting the volume Use hotkeys to easily adjust the volume on your computer. See "Hotkeys" on page 37 for more information on adjusting the speaker volume.
Dolby Digital Live Found in PC and console-based video game applications, Dolby Digital Live converts any stereo or multichannel audio signal to a Dolby Digital format for a dramatic, real-time audio experience and simple (one plug) connection to an A/ V receiver for playback.
Page 69
The Playback Devices dialog box will pop up. There are three tabs: Playback, Recording and Sounds. Click the Playback tab, and then select Realtek Digital Output and click Set Default to set the digital output. For enjoying movies, games and music in a realistic, multi-channel...
Nplify supports Acer SignalUp technology and 802.11a/b/g/Draft-N (dual-band tri-mode) access points. To enjoy Nplify performance, please refer to the Access Point user manual to optimize your wireless channel settings.
Acer GridVista (dual-display compatible) Note: This feature is only available on certain models. To enable the dual display feature of your notebook, first ensure that a second display is connected, then, open the Display Settings properties box using the Control Panel or by right-clicking the Windows desktop and selecting Personalize.
Launch Manager allows you to set the easy-launch button located above the keyboard. "Easy-launch buttons" on page 30 for the location of the easy-launch buttons. You can access the Launch Manager by clicking on Start, All Programs, and then Launch Manager to start the application.
You can schedule customized virus scans that run unattended on specific dates and times or at periodic intervals. If you are using the computer when the scheduled scan begins, it runs in the background so that you do not have to stop working.
Frequently asked questions The following is a list of possible situations that may arise during the use of your computer. Easy solutions are provided for each one. I turned on the power, but the computer does not start or boot up.
Page 76
I want to eject the optical drive tray without turning on the power. There is a mechanical eject hole on the optical drive. Simply insert the tip of a pen or paperclip into the hole and push to eject the tray. (If your computer's optical drive is a slot-load model, it will not have an eject hole.)
C: drive. (Your C: drive will be reformatted and all data will be erased.) It is important to back up all data files before using this option. Before performing a restore operation, please check the BIOS settings.
If there are error messages or beeps reported by your computer, write them down as they appear on the screen (or the number and sequence in the case of beeps).
However, recharging with the computer turned off results in a significantly faster charge time. The battery will come in handy when you travel or during a power failure. It is advisable to have an extra fully charged battery pack available as backup. Contact your dealer for details on ordering a spare battery pack.
Use this conditioning process for all new batteries, or if a battery hasn't been used for a long time. If the computer is to be stored for more than two weeks, you are advised to remove the battery pack from the unit.
Use AC power whenever possible, reserving battery for on-the-go use. • Eject a PC Card if it is not being used, as it will continue to draw power (for selected model). • Store the battery pack in a cool, dry place. The recommended temperature is 10°C (50°F) to 30°C (86°F).
Page 82
When using battery power pay attention to the Windows power meter. Warning: Connect the AC adapter as soon as possible after the battery-low warning appears. Data will be lost if the battery to become fully depleted and the computer shuts down.
To bring the computer out of Sleep mode, open the display; then press and release the power button. If you are taking the computer to a client's office or a different building, you may choose to shut down the computer: Click on Start, Turn Off Computer, then click on Turn Off (Windows XP).
If your meeting is relatively short, you probably do not need to bring anything with you other than your computer. If your meeting will be longer, or if your battery is not fully charged, you may want to bring the AC adapter with you to plug in your computer in the meeting room.
Minimize the effects of temperature changes by keeping the computer with you. • If you need to stop for an extended period of time and cannot carry the computer with you, leave the computer in the trunk of the car to avoid exposing the computer to excessive heat.
Always take the computer as carry-on luggage. • If possible, have the computer inspected by hand. Airport security X-ray machines are safe, but do not put the computer through a metal detector. • Avoid exposing floppy disks to hand-held metal detectors.
Wrap a computer security lock cable around an immovable object such as a table or handle of a locked drawer. Insert the lock into the notch and turn the key to secure the lock. Some keyless models are also available.
Entering passwords When a password is set, a password prompt appears in the center of the display screen. • When the Supervisor Password is set, a prompt appears when you press <F2> to enter the BIOS utility at boot-up. •...
Acer ezDock Series Acer ezDock includes Acer ezDock II+ and Acer ezDock II, both of which provide excellent total cost of ownership for you and your corporation. For details of the features please check the table below...
Page 90
(subject to availability) ExpressCard™ /54 slot ExpressCard/54 Acer MediaBay AC Adapter Connecting to a notebook PC Disconnect the ac adapter from your computer, or you might damage the ac adapter. Check the ezDock code located on the underside of your Acer notebook...
Page 91
Press the release button and adjust the alignment guide to the desired number. Position your Acer notebook PC over the ezDock and gently lock in place. When the green dock indicator light is on, gently graspe and press the both sides of the system until you hear a click.
Plugging this modem into a digital phone line will damage the modem. To use the fax/data modem port, connect a phone cable from the modem port to a telephone jack. Warning! Please make sure that the cable you use is appropriate for the country in which you are working.
To use the network feature, connect an Ethernet cable from the Ethernet (RJ-45) port on the chassis of the computer to a network jack or hub on your network. Fast Infrared (FIR) The computer's Fast Infrared (FIR) port allows you to do wireless data transfer with other IR-aware computers and peripherals such as PDAs, mobile phones, and infrared printers.
Universal Serial Bus (USB) The USB 2.0 port is a high-speed serial bus which allows you to connect USB peripherals without taking up precious system resources. IEEE 1394 port The computer's IEEE 1394 port allows you to connect to an IEEE 1394- compatible device like a video camera or digital camera.
ExpressCard The ExpressCard is the newest version of the PC Card. It is a smaller and faster interface that further enhances the usability and expandability of your computer. ExpressCards support a vast number of expansion options, including flash memory card adapters, TV-tuners, Bluetooth connectivity and IEEE 1394B adapters.
To activate the BIOS utility, press <F2> during the POST; while the notebook PC logo is being displayed. Boot sequence To set the boot sequence in the BIOS utility, activate the BIOS utility, then select Boot from the categories listed at the top of the screen.
To enable disk-to-disk recovery (hard disk recovery), activate the BIOS utility, then select Main from the categories listed at the top of the screen. Find D2D Recovery at the bottom of the screen and use the <F5> and <F6> keys to set this value to Enabled.
Page 98
Note: To change the region code, insert a DVD movie of a different region into the DVD drive. Please refer to the online help for more information.
Acer eRecovery Management is a tool to quickly backup and restore the system. You can create and save a backup of the current system configuration to hard disk, CD or DVD. You can also backup/restore the factory default image, and reinstall applications and drivers.
Switch to the Burn Disc page by selecting the Burn Disc button. Select the type of backup (factory default, user, current system, application) you would like to burn to disc. Choosing to burn a user backup will burn your most recently created backup image to disc.
This notebook PC incorporates an advanced design that delivers onscreen error message reports to help you solve problems. If the system reports an error message or an error symptom occurs, see "Error messages" below. If the problem cannot be resolved, contact your dealer. See "Requesting service"...
Page 102
If you still encounter problems after going through the corrective measures, please contact your dealer or an authorized service center for assistance. Some problems may be solved using the BIOS utility.
Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
If possible, they will notify you in advance. But, if advance notice is not practical, you will be notified as soon as possible. You will also be informed of your right to file a complaint with the FCC.
If this equipment should fail to operate properly, disconnect the equipment from the phone line to determine if it is causing the problem. If the problem is with the equipment, discontinue use and contact your dealer or vendor.
Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should NOT contact the telecom Fault Service.
Laser compliance statement The CD or DVD drive used with this computer is a laser product. The CD or DVD drive's classification label (shown below) is located on the drive. CLASS 1 LASER PRODUCT CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM.
General This product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Depending on configurations, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth modules). Below information is for products with such devices.
The radiated output power of the wireless LAN Mini PCI Card and Bluetooth card is far below the FCC radio frequency exposure limits. Nevertheless, the notebook PC series shall be used in such a manner that the potential for human contact during normal operation is minimized as follows: Users are requested to follow the RF safety instructions on wireless option devices that are included in the user's manual of each RF option device.
This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems.
Illuminance level: • α α [250 + (250cos )] lx where = 85° Color: Source D65 • Reflection class of LCD panel Ordinary LCD: Class I • (positive and negative polarity) ™ Protective or Acer CrystalBrite LCD: • Class III...
Windows keys caring for cleaning xvii disconnecting left view features indicators keyboards media access moving around on indicator on indicator memory security installing setting up a home office messages taking home error...
Page 114
CD or DVD modem notices Windows keys scroll lock...