Kenwood DP-J1070 Instruction Manual
Hide thumbs
Also See for DP-J1070:
- Instruction manual (29 pages) ,
- Instruction manual (28 pages) ,
- Instruction manual (16 pages)
Advertisement
Quick Links
CD PLAYER
DP-J695
INSTRUCTION MANUAL
CORPORATION
This instruction manual is used for
Model availability and features (functions)maydiffer depending on the country and sales area.
for
This unit is designed
home use only.
If
the unit is used in a locationother than at home, such as in a shop (for commercial
use), in a car or in a ship, etc., and is damaged, a service
during the warranty period.
For your records
Recordtheserial number, f o und on the back
and in :he space provided below. Refer to the model and serial numbers whenever you call upon your
dealer for information or service on this product.
Model
Unpacking
Unpack the unit carefully and make
Examinethe unit for any possibility
your dealer immediately. If your unit was shipped to you directly, notify the shipping company without
delay. Only the consignee (the person
for shipping
damage
We recommend that you retain the original carton and packing materials for use should you transport
or ship the unit
in the future.
Accessories
Liner note file (1)
Remote control unit
(1)
DIGITAL AUDIO
860-2217-10
1 0 9 8 7 6 5 4 3 2 1
models.
two
the unit, in the spsces designated on the warranty
of
Serial Number
all accessories are put aside
sure that
shipping damage. If your unit is damaged
of
or
company receiving the unit) can file a ciaim against the carrier
cord
Audio
(1)
Batteries (R6/AA)
(2)
on
power
Use
to adapt the plug
the
(Accessory
only for regions where use
1 0 9 8
fee
may
be
charged even
card.
they will not be lost.
so
or
fails tooperate, notify
System control cord
(1)
AC plug adaptor (1)
of
cord to
the shape
the wall outlet
)
necessary
I S
Advertisement
Related Manuals for Kenwood DP-J1070
Summary of Contents for Kenwood DP-J1070
- Page 1 CD PLAYER DP-J695 INSTRUCTION MANUAL CORPORATION This instruction manual is used for models. Model availability and features (functions)maydiffer depending on the country and sales area. This unit is designed home use only. the unit is used in a locationother than at home, such as in a shop (for commercial use), in a car or in a ship, etc., and is damaged, a service charged even during the warranty period.
- Page 2 *#e:J3 operation as follows. Units designed ..........only U.S.A. Canada A C 120 and U.K.
- Page 3 CD Player with 100-disc changer Thisunitcan accommodateup to 100 discs and can beusedlike a home jukebox. discs Programmed Playback Desired tracks from up to 100 can be selected and programmed in a desired order. (Maximum tracks) Editing When recording disc on a cassette tape, thetracks on the disc can be assigned properly t o the tape sides so that no tracks...
- Page 4 ........Removing the transport screws unit, Before using the remove the 5 red transport screws medium (longx 2,...
- Page 5 Donot plug in sure to use this unit placed surface. level Another DP-J1070, Mini-plug cord (optional) Audio cord outlet System control cord MODE...
- Page 6 System controlconnection When connected to an amplifier or receiver having KENWOOD SYSTEM CONTROL terminals, system operation such as remote control is made possible. For details, refer to the instruction manual of the amplifier or receiver. If your amolifier or receiver is not equipped with the...
- Page 7 ..[En] indicators NO. display Program Check RELAY indicator PGM indicator display TRACK NO REPEAT T i n a Pause indicators RANDOM indicators EDIT marks are When door panel opened POWER key Disc RACK Disc RACK A lock button Remote sensor Push and hold to slide cut disc rack A.
- Page 8 ....[En] DISP. key ntrol mode switch RELAY same position as the REMOTE Press to start relay playback. therearpanelofthe REPEAT key Press to repeated playback. RANDOM key Press to start random playback.
- Page 9 Remove cover. polarity following the indicedons. cover. POWER key of power turn of the system ON. When the power control is turned ON, pressthe key of the function to be operated. sensor Model: Infrared ray system When pressing than one remote control keys press the more between keys.
- Page 10 loaded the disc racks. Up to When loading in the racks, it will be convenient for future reference of the liner notes or jackets are filed the liner note file in the order as the order followed in loadingthe WOOD keys, etc., to be used.
- Page 11 ........Each racks A and can accommodate up to 50 discs.
- Page 12 Load discs in the Indicates the keys, etc.. to procedure in the original order following to play track of tracks power Switch If discs have been loaded in the unit, the last selected disc starts to play want turned ON. Go play the power another...
- Page 13 As this unit requires input large nmericvalues, it adopts input from other KENWOOD products. However, the method used with other KENWOOD products be used input numeric values in this unit. Special input method for CD player with 100-disc changer...
- Page 14 used. Indicates keys. etc., to be - I - Check that the indicator is not lit. goes indicator id, press the remote control off. unit disc. Display when disc No. 63 selected Select the disc disc number directly by disc using DISC in place of...
- Page 15 Indicates the keys, used. When pressed once playback, tne track being played will be played from the beginning Searchina Forward search Piayback the position where the key is released. display disc on the selection methods DISP. Each press of the key changes the contents.
- Page 16 ... . tracks) from up to and program them discs in the desired Set the player to mode indicates etc., to be used the keys, that the indicator Press is displayed mode.
- Page 17 ................. To check theprogrammed tracks Eachtime the key pressed, the No. are d splayed display resumes in a few seconds To add stop Set the CD player to mode.
- Page 18 Load discs in the racks. (discs) only the desired tracks by repeating steps desired tracks (discs) performing "Program- ming tracks in desired order". the "PGM" that indicator REPEAT ON. REPEAT "REPEAT' Press indicator lights. playback. of the programmed tracks be repeated. will In case oniy one track is programmed, only that track repeated.
- Page 19 ....Use the following procedure to activate random playback which track at random after every track. This feature may play allow for long hours without getting tired of. keys.
- Page 20 ..........This function editingwhen you are recording the contents It Is to ensure that the final track on each...
- Page 21 ........... . [ i n ) maybe used byconnecting to any...
- Page 22 RELAY This system configuration is used for connection with KENWOOD CD equipped with the CONTROLjacks. Relayplayback playback is possible between sets A. Band C. When the power mode), relay playback is possible between between sets A and B.
- Page 23 This system configuration is used for connection with any KENWOOD CD player. outline set Aare played ard then relay playback stops. Relay random playback is not possiblewith discs in set been played, discs this system. Even when power off (STANDBY mode), the playback of set can be reproduced if the power of set is ON.
- Page 24 Connect equipment to "Possible ons" *Switch the powers equipment. inthe racksortray "PGM' Check that the indicator is not lit Set the CD players in stop mode. Discs loadedinthe playersets connected though (optional) can be played set by set. Activate the relay play mode. Each of the connected sets plays discs from the currently displayed disc playback.
- Page 25 As this unit incorporate the standby function, timer playback can be started at desired moment if a commercially available audio timer is combined with this unit. Load Connect the that their power can be switched on by the timer instruction the timer carefully Set the power switches of the system compo-...
- Page 26 handling Cleaning Handing Hold discs that do not fingerprints foretgn become attached to the disc, lightly the disc the playing surface with a soft cotton cloth (or similar) from the center radial manner. side Playng not attach paoer or tape to either the side side of compact Storage...
- Page 27 Operation to reset Unplug the power cord from the power socket and, The microcomputer may fall into malfunction to operate. power STOP while holdingthe keydepressed,plugthe erroneous display, the power cord is while cord into the again. power is or due to an external factor. In this case, execute the following method reset the microcomputer and return it to Please note that restarting the microcomputer clears the contents...
- Page 28 ......................Compact disc digital audio system ..................Semiconductor laser ..............channels 2 channels ................. (CLV) Playing rotation 200 rpm 500 rpm D/A Convertors ................