Advertisement
Available languages
Available languages
Quick Links
Daily Reference Guide
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
In order to receive a more complete assistance, please
register your appliance on: www.whirlpool.eu/register
CONTROL PANEL
1. ON-OFF/Reset button with indicator light
2. PREVIOUS program button
3. NEXT program button
4. FAVOURITE program button with indicator light
5. Salt reservoir empty indicator light
6. Rinse Aid reservoir empty indicator light
7. DESCALE indicator light
8. Closed Water Tap indicator light
9. Display
10. Program number and remaining time indicator
11. Power Clean® option button with indicator light
FIRST TIME USE
SETTING MENU
1. Switch on the appliance by pressing the ON-OFF
2. Hold the Settings
(Half Load
a beep and the display shows „SEt".
3. After one second the first available setting (letter „h") will be displayed.
4. Press PREVIOUS /NEXT to scroll through the list of available settings
(see table below), then press START/Pause
value of the currently selected setting.
5. Press PREVIOUS /NEXT to change the value, then press START/Pause
to save the new value and return to the main menu.
6. To change another setting, repeat points 4 and 5.
7. Press ON-OFF
or wait 30 seconds to exit the menu.
LETTER
SETTING
Water Hardness Level
(see "SETTING THE WATER HARDNESS"
and "WATER HARDNESS TABLE")
Rinse Aid Level
(see "ADJUSTING THE DOSAGE OF RINSE AID")
NaturalDry (see "OPTIONS AND FUNCTIONS")
"1" = On, "0" = Off
Light on the floor (see "OPTIONS AND FUNCTIONS")
"1" = On, "0" = Off
"1" = On, "0" = Off
Factory Settings
Press START/Pause to restore to the factory
default all the values of the settings included in
the settings menu.
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the dishes and on
the machine's functional components.
The salt reservoir is located in the lower part of the dishwasher (under the
lower rack on the left side).
• It is mandatory that the salt reservoir never be empty.
• It is important to set the water hardness.
• Salt must be filled when the SALT REFILL indicator light
trol panel is lit.
1. Remove the lower rack and unscrew the reservoir cap
(anticlockwise).
2. Position the funnel (see figure) and fill the salt reservoir
right up to its edge (approximately 0,5 kg); it is not un-
usual for a little water to leak out.
3. Only the first time you do this: fill the salt reservoir
with water.
4. Remove the funnel and wipe any salt residue away from the opening.
Make sure the cap is screwed on tightly so that no detergent can get into
the container during the wash program (this could damage the water sof-
tener beyond repair). Run a program every time as soon as you complet-
ed refilling the salt reservoir to avoid corrosion.
Setting the water hardness
To allow the water softener to work in a perfect way, it is essential that the
water hardness setting is based on the actual water hardness in your house.
This information can be obtained from your local water supplier. The facto-
ry setting is "3". See „WATER HARDNESS TABLE"
To change, follow instructions in section "SETTING MENU".
Only use salt that has been specifically designed for dishwashers.
After the salt has been poured into the machine, the SALT REFILL indicator
light switches off. If the salt container is not filled, the water softener and
the heating element may be damaged as a result of limescale accumula-
tion. Use of salt is recommended with any type of dishwasher detergent.
1
button.
) button for 3 seconds, until you hear
to view and change the
(Default - in bold)
0 | 1 | 2 | 3 | 4 | 5
Sound
.
Before using the appliance carefully read Safety
and Installation Instructions. More information about your product
available on website: docs.whirlpool.eu/docs
After installation, please remember to remove all transport protection
2
3
4
5 6 7 8 9
12. Half Load option button with indicator light/ Settings - 3 sec. press
13. Extra Dry option button with indicator light
14. Delay option button with indicator light
15. START/Pause button with indicator light
Level
1 (soft)
2 (medium)
3 (average)
4 (hard)
5 (very hard)
WATER SOFTENING SYSTEM
Water softener automatically reduces water hardness, consequently pre-
VALUES
venting scale buildup on the heater, contributing also to better cleaning ef-
ficiency. This system regenerates itself with salt, therefore it is required
to refill the salt container when empty. The frequency of regeneration de-
1 | 2 | 3 | 4 | 5
pends on the water hardness level setting - regeneration takes place once
per 4-6 Eco cycles with the water hardness level set to 3. The regeneration
process occurs at the beginning of the cycle with additional fresh water.
• Single regeneration consumes: ~3L of water;
• Takes up to 5 additional minutes for the cycle;
1 | 0
• Consumes below 0.005kWh of energy.
FILLING THE RINSE AID DISPENSER
1 | 0
Rinse aid makes dish DRYING easier. The rinse aid dispenser A should be
filled when the RINSE AID REFILL indicator light
1 | 0
-
B
3. Press the lid down until you hear a click to close it.
NEVER pour the rinse aid directly into the appliance tub.
Adjusting the dosage of rinse aid
If you are not completely satisfied with the drying results, you can adjust
on the con-
the quantity of rinse aid used.
To change, follow the instructions in the section "SETTING MENU".
If the rinse aid level is set to ZERO, no rinse aid will be supplied. The LOW
RINSE AID indicator light will not be lit if you run out of rinse aid.
A maximum of 6 levels can be set according to the dishwasher model.
• If you see bluish streaks on the dishes, set a low number (0-3).
• If there are drops of water or limescale marks on the dishes, set a mid-
range number (4-5).
FILLING THE DETERGENT DISPENSER
D
C
2. Remove detergent residues from the edges of the dispenser and close
the cover until it clicks.
3. Close the lid of the detergent dispenser by pulling it up until the closing
device is secured in place.
The detergent dispenser automatically opens up at the right time accord-
ing to the program. Usage of detergent not designed for dishwashers
may cause malfunction or damage to the appliance.
parts from the dishwasher.
10
11
12
Water Hardness Table
°dH
°fH
German degrees
French degrees
0 - 6
0 - 10
7 - 11
11 - 20
12 - 16
21 - 29
17 - 34
30 - 60
35 - 50
61 - 90
in the control panel is lit.
1. Open the dispenser B by
pressing and pulling up the
tab on the lid.
2. Pour in the rinse aid (max.110
ml), making sure it does not
overflow from the dispenser.
A
If this happens, clean the spill
immediately with a dry cloth.
To open the detergent dispenser use the open-
ing device C. Introduce the detergent into the
dry dispenser D only. Place the amount of deter-
gent for pre-washing directly inside the tub.
1. When measuring out the detergent refer to the
mentioned earlier information to add the proper
quantity. Inside the dispenser D, there are indica-
tions to help the detergent dosing.
EN
13
14
15
°Clark
English degrees
0 - 7
8 - 14
15 - 20
21 - 42
43 - 62
W11553946 panel
W11572189 button R
W11572083 button L
W11569647 display
1
Advertisement
Related Manuals for Whirlpool W7IHP40LC
Summary of Contents for Whirlpool W7IHP40LC
- Page 1 Daily Reference Guide THANK YOU FOR BUYING A WHIRLPOOL PRODUCT. Before using the appliance carefully read Safety In order to receive a more complete assistance, please and Installation Instructions. More information about your product register your appliance on: www.whirlpool.eu/register available on website: docs.whirlpool.eu/docs After installation, please remember to remove all transport protection parts from the dishwasher.
- Page 2 DAILY USE 1. CHECK WATER CONNECTION MODIFYING A RUNNING PROGRAM Check that the dishwasher is connected to the water supply and that If a wrong program was selected, it is possible to change it, provided the tap is open. that it has only just begun. RESET the machine: press and hold the ON/OFF button for more than 3.
- Page 3 Daily Reference Guide PROGRAMS TABLE Duration Water Energy of wash Programs description Available options consumption consumption program (litres/cycle) (kWh/cycle) (h:min) Eco 50° - Program is suitable to clean normally soiled tableware, that for this use, it is the most efficient program in terms of its combined 3:30 0.76 energy and water consumption, and that it is used to assess compli-...
- Page 4 LOADING THE RACKS CAPACITY: 15 standard place-settings CUTLERY RACK Foldable flaps with adjustable position The third rack was designed to house the cutlery. The side foldable flaps can be folded or unfold- Arrange the cutlery as shown in the figure. ed to optimize the arrangement of crockery in- A ...
- Page 5 Daily Reference Guide CLEANING THE SPRAY ARMS On occasions, food residue The lower spray arm may be removed may become encrusted onto by pulling it upwards and rotating it an- the spray arms and block the ti-clockwise. Mounting back the spray holes used to spray the water.
- Page 6 Policies, standard documentation, ordering of spare parts and additional product information can be found by • Using QR code and visiting our website: docs.whirlpool.eu/docs • Visiting our website: parts-selfservice.europeanappliances.com • Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales Service, please state the codes provided on your product’s identification plate.
- Page 7 Bedienungsanleitung Diese Sicherheits- und Installationsanweisungen DANKE, DASS SIE SICH FÜR EIN WHIRLPOOL PRODUKT ENT- vor dem Gebrauch aufmerksam durchlesen. Weitere Informationen SCHIEDEN HABEN. über Ihr Produkt sind auf folgender Website verfügbar: Für eine umfassendere Unterstützung melden Sie Ihr Gerät docs.whirlpool.eu/docs runtergeladen werden.
- Page 8 EINFÜLLEN DES SPÜLMITTELS 2. Entfernen Sie eventuelle Spülmittelrückstände von den Kanten der Kammern und schließen Sie den Deckel so, dass er einrastet. Zum Öffnen des Spülmittelbehäters den Öffnungs- 3. Schieben Sie den Deckel der Spülmittelkammer zum Schließen nach mechanismus C drücken. Füllen Sie das Spülmittel oben, bis er einrastet.
- Page 9 Bedienungsanleitung PROGRAMMTABELLE Programm- Wasserver- Energiever- Verfügbare Programmbeschreibung dauer brauch brauch Zusatzfunktionen (Std:Min) (Liter/ Zyklus) (kWh/ Zyklus) Eco 50°- Das ECO-Programm eignet sich, um normal verschmutztes Geschirr zu reinigen. In Bezug auf den kombinierten Energie- und 3:30 0,76 Wasserverbrauch ist es das effizienteste Programm, das auch zur Prü- fung der Einhaltung der Ökodesign-Richtlinie verwendet wird.
- Page 10 ERKENNUNG - Wenn der Sensor den Grad der Verschmutzung FAVORITEN-PROGRAMM - Das Favoriten-Programm kann gespeichert werden und ist einfach zugänglich. Finden Sie das Programm mit ZU- erfasst, wird im Display eine Animation angezeigt (etwa 20 Minuten) und die Programmdauer wird aktualisiert. Sensing RÜCK/WEITER und drücken Sie dann die Favoriten-Programm-Taste 3 Se- (Erkennung) erkennt die Stärke der Verschmutzung des Geschirrs und passt kunden lang.
- Page 11 Bedienungsanleitung PFLEGE UND WARTUNG REINIGUNG DER FILTEREINHEIT Die Filtereinheit regelmäßig reinigen, damit die Filter nicht verstopfen und das Abwasser korrekt abfließen kann. Wenn die Filter beim Einsatz des Geschirrspülers verstopft sind oder falls Fremdkörper im Filtersystem oder in den Spülarmen gelangen, könnten Störungen im Gerät auftreten, was zu Leistungseinbußen, lautem Betrieb oder höherer Ressourcennutzung führt.
- Page 12 F8 E5 an dendienst kontaktieren. Firmenrichtlinien, Standarddokumentation, Ersatzteilbestellung und zusätzliche Produkt- informationen finden Sie unter: • Verwenden Sie den QR-Code und besuchen Sie unsere Internetseite docs.whirlpool.eu/docs • Besuchen Sie unsere Internetseite: parts-selfservice.europeanappliances.com unseren Kundendienst kontaktieren • Alternativ können Sie (Siehe Telefonnummer in dem Garantieheft).
- Page 13 Pour en savoir plus concernant votre pro- Afin de recevoir une assistance plus complète, merci d’enregis- duit, consulter le site Internet : docs.whirlpool.eu/docs trer votre appareil sur: www.whirlpool.eu/register Après l’installation, rappelez-vous d’enlever toutes les pièces de protec- tion pour le transport du lave-vaisselle.
- Page 14 REMPLIR LE DISTRIBUTEUR DE DÉTERGENT 2. Enlevez les résidus de détergent sur le bord des récipients avant de fer- mer le couvercle; un clic se fait entendre. Pour ouvrir le distributeur de détergent, utilisez le dispositif d’ouverture C. Insérez le détergent 3.
- Page 15 Les données du programme Éco sont mesurées sous des conditions en laboratoire conformément à la norme européenne EN 60436:2020. Note pour les laboratoires d’essai : pour toutes informations sur les conditions d’essai comparatif EN, s’adresser à: dw_test_support@whirlpool.com. Aucun prétraitement de la vaisselle n’est nécessaire avant l’un quelconque des programmes.
- Page 16 Si les actions ci-dessus ne sont pas réalisées, les performances du produit se DÉTARTRAGE - Alarme - Une accumulation de tartre a été détectée détérioreront. Un avertissement de « Détartrage » commencera à clignoter sur des composants internes de l’appareil. Vérifier si le Réglage de et une alarme «...
- Page 17 Guide D’utilisation Quotidienne NETTOYAGE ET ENTRETIEN NETTOYER L’ENSEMBLE FILTRE Nettoyez régulièrement l’ensemble filtre pour éviter qu’il ne se bouche et pour permettre aux eaux usées de bien s’éliminer. L’utilisation du lave-vaisselle avec des filtres obstrués ou des corps étran- gers à l’intérieur du système de filtration ou des bras de lavage peut pro- voquer un dysfonctionnement du lave-vaisselle en réduisant l’efficacité...
- Page 18 Vous trouverez les documents normatifs, la documentation standard, le classement des pièces de rechange et des informations supplémentaires sur les produits • En utilisant le QR code sur votre produit et visitant notre site web docs.whirlpool.eu/docs • En visitant notre site web parts-selfservice.europeanappliances.com contacter notre Service après-vente...
- Page 19 Snelle referentiegids Lees vóór gebruik van het apparaat de veiligheids- en DANK U WEL VOOR UW AANKOOP VAN EEN WHIRLPOOL installatie-instructies zorgvuldig door. Meer informatie over uw product PRODUCT. is te vinden op website: docs.whirlpool.eu/docs Voor verdere assistentie kunt u het apparaat registeren op: www.whirlpool.eu/register...
- Page 20 Er kan een maximum van 6 niveaus worden ingesteld, afhankelijk van het 1. Raadpleeg bij het afmeten van het vaatwasmiddel de eerder vermelde informatie om de juiste hoeveelheid toe te voegen. In het doseerbakje D model afwasmachine. • Als u blauwe strepen op het vaatwerk ziet stel dan een laag getal in (0-3). vindt u de aanwijzingen voor het doseren van het vaatwasmiddel.
- Page 21 Snelle referentiegids PROGRAMMATABEL Duur van Waterver- Energiever- Program- waspro- Beschrijving programma’s Beschikbare functies bruik bruik gramma (liter/cyclus) (kWh/cyclus) (h:min) Eco 50°- -programma is geschikt voor het reinigen van normaal vervuild vaatwerk, dat voor dit gebruik het meest efficiënte pro- gramma is wat betreft de combinatie van energie- en waterver- 3:30 0,76 bruik en in overeenstemming is met de Europese Ecodesign-wet-...
- Page 22 ONTKALKEN – Alarm - Er is kalkaanslag geconstateerd op interne Als de bovenstaande handelingen niet worden uitgevoerd, zal het apparaat onderdelen van het apparaat. Controleer of de waterhardheid juiste minder goed werken. De waarschuwing ‘Ontkalken’ begint te knipperen is ingesteld en of er zout in het zoutreservoir zit (zie EERSTE GEBRUIK). Gebruik en op het display verschijnt ‘dES’...
- Page 23 Snelle referentiegids REINIGING EN ONDERHOUD HET FILTERSYSTEEM REINIGEN Reinig het filtersysteem regelmatig, zodat de filters niet verstoppen en het afvalwater correct weg stroomt. Het gebruik van vaatwasmachines met verstopte filters of vreemde voor- werpen in het filtersysteem of de sproeiarmen kan de slechte werking er- van en bijgevolg lagere prestaties, lawaai of een hoger verbruik van hulp- bronnen veroorzaken.
- Page 24 Sluit de kraan, indien mogelijk. Schakel de voeding niet uit. Bel de klantenservice. staat F8 E5 De bedrijfsregels, standaarddocumentatie, bestellen van onderdelen en aanvullende productinformatie kunt u vinden: • Gebruik makend van de QR-code en op onze website: docs.whirlpool.eu/docs • Op onze website: parts-selfservice.europeanappliances.com contacteer onze Klantenservice • Anders, (Het telefoonnummer staat in het garantieboekje).