Advertisement
Quick Links
Advertisement
Related Manuals for Asus E210M Series
Summary of Contents for Asus E210M Series
- Page 1 Disassembly Procedure ASUS E210M series Repair Manual...
- Page 2 Disassembly Procedure...
- Page 3 Disassembly Procedure Service Overview Please pay special attention to the cautions below to prevent any damages to the notebook and please be sure to select the appropriate tools described in this section to perform any services desired. Precautions Before you perform any service or repair on the notebook, please follow the steps below first. 1.
- Page 4 Disassembly Procedure 9. Screw Appearance Criteria. If the screws have the following damaged appearance, please do not use. a. Shape deformed. b. Paint scratched off. c. Rusty. d. Damaged head – unable to drive in. e. Damaged unable to securely tighten. 10.
- Page 5 Disassembly Procedure Appropriate Tools The illustrations below show the appropriate tools that should be used for the notebook’s service and repair. ➢ Cross Screwdriver Please accord to different screw specification to choose different screwdriver and head. Below photos are for reference only. Use a cross screwdriver to fasten/remove screws.
- Page 6 Disassembly Procedure ➢ Thickness gauge Thickness compass specification 0.05mm-1.5mm. Use it to measure the gap.
- Page 7 Disassembly Procedure Bottom Case Module The illustrations below show how to remove the Bottom Case Module. Notice: Before disassembly, please be sure to pull out adapter and disconnect the battery more than ten seconds in order to avoid IC damage. 1.
- Page 8 Disassembly Procedure Snaps as below Parts: ⚫ Total screw * 10 ⚫ BOTTOM CASE *1 ⚫ (Actual part name depends on different SKU.)
- Page 9 Disassembly Procedure Battery Module The illustrations below show how to remove the Battery Module. Notice: Before disassembly, please be sure to pull out adapter and disconnect the battery more than ten seconds in order to avoid IC damage. Disconnect the battery connector. Disconnect the IO FFC.
- Page 10 Disassembly Procedure 4. Remove the Battery. SCREW M2*4L Assembly notice: Please change new one if FFC is damage during disassembly. Here are some samples of FFC damage: Parts: ⚫ Total screw * 4 ⚫ E210 BATT *1 ⚫ (Actual part name depends on different SKU.)
- Page 11 Disassembly Procedure Speaker Module The illustrations below show how to remove the Speaker Module. 1. Disconnect the speaker cable 2. Take out the speaker. Please arrange the speaker cable well when you assemble it. Parts: ⚫ Total screw * 0 ⚫...
- Page 12 Disassembly Procedure Touchpad Module The illustrations below show how to remove the Touchpad Module. 1. Disconnect the TP FFC and remove the TP Holder Gasket. Notice: Insert FFC to the bottom until just accord with the line when lock the latch. The Gasket must be stuck well when assembled.
- Page 13 Disassembly Procedure Parts: ⚫ Total screw * 3 ⚫ TOUCHPAD *1 ⚫ X330UA TP HOLDER GASKET *1 ⚫ E210MA TP FFC 8P 0.5MM L47//XINYA/X19AA1-8372-HP *1 ⚫ (Actual part name depends on different SKU.)
- Page 14 Disassembly Procedure WLAN Module The illustrations below show how to remove the WLAN Module. Remove the antenna connectors. Remove 1 screw and take out the WLAN. Screw tightening torque: 2.0KG±0.2kgf SCREW M2*2.5L Parts: ⚫ Total screw * 1 ⚫ 802.11AC+BT5.0(2*2)M.2_WW//IN/9560.NGWG.NV957715JFP2/BLK *1 ⚫...
- Page 15 Disassembly Procedure IO Board The illustrations below show how to remove the IO Board. Remove 2 screws and rotate the hinge. Screw tightening torque: 2.5KG±0.2kgf Take out the IO board and AUX antenna. Please arrange the antenna well when you assemble it. SCREW M2.5*4L Remove the AUX antenna.
- Page 16 Disassembly Procedure Parts: ⚫ Total screw * 2 ⚫ E210MA WIFI AUX ANTENNA//AWAN/AYP6Y-100108*1 ⚫ IO_BD.//R2.0*1 ⚫ (Actual part name depends on different SKU.)
- Page 17 Disassembly Procedure Thermal Module The illustrations below show how to remove the Thermal Module. Remove 4 screws. Assembly Notice: follow the reverse numbers to lock screws. Screw tightening torque: 2.0KG±0.2kgf M2*2.5L 2. Take out the Thermal Module. Please clean the remaining thermal material and order for thermal material UL50A TH CPU PAD rework when you re-assemble thermal module.
- Page 18 Disassembly Procedure Parts: ⚫ Total screw * 4 ⚫ THERMAL MODULE// *1 ⚫ (Actual part name depends on different SKU.)
- Page 19 Disassembly Procedure Motherboard Module The illustrations below show how to remove the Motherboard Module. Remove 3 screws, disconnect the EDP Cable Keyboard Cable. Screw tightening torque: 2.0KG±0.2kgf Assembly Notice: Please well arrange the cables when you assemble them. M2*2.5 2. Remove 2 screws on the hinge and rotate it. Screw tightening torque: 2.5KG±0.2kgf M2.5*4 Take out the mainboard.
- Page 20 Disassembly Procedure Notice: These pictures for your reference for mylar/gasket/sponge etc. of MB. E210MA THM CPU PAD//LAIRD...
- Page 21 Disassembly Procedure Top Case Module The illustrations below show how to remove the Top Case Module. Follow the direction of the arrows to rotate the hinges, take out the Top Case . Parts: ⚫ Total screw * 0 ⚫ K/B_(ND)_MODULE*1 ⚫...
- Page 22 Disassembly Procedure LCD Module The illustrations below show how to remove the LCD Module. 1. Remove 2 screw mylars. 2. Remove 2 screws on the Bezel. Screw tightening torque: 2.5KG±0.2kgf SCREW M2.5*3.5L...
- Page 23 Disassembly Procedure 3. Use plastic blade to pry up the edge , take the LCD bezel out . 4. Follow below numbers to remove 4 screws on the hinge . Assembly Notice: follow the reverse numbers to lock screws. Screw tightening torque (Kg F-cm): 2.5KG±0.2kgf.
- Page 24 Disassembly Procedure SCREW M2.5*3L Notice: If you need to replace hinges (hinge covers), please make sure hinge (hinge cover) R and hinge (hinge cover) L are the same vendor . Remove 2 screws and take out the hinge cap L and R. Screw tightening torque (Kg F-cm): 1.8KG±0.1kgf.
- Page 25 Disassembly Procedure 6. Rotate the LCD panel and disconnect the EDP Cable , take out the panel. Disconnect the EDP Cable MAIN Antenna , remove the camera. Please arrange the cable well when you assemble them.
- Page 26 Disassembly Procedure Snaps as below Parts: ⚫ Total screw * 10 ⚫ LCD BEZEL SCREW MYLAR//EASYRUN*2 ⚫ LCD BEZEL SUB ASSY//POWER SUCCES*1 ⚫ HINGE L//兆利*1 ⚫ HINGE R//兆利*1 ⚫ LCD COVER SUB ASSY//POWER SUCCES*1 ⚫ WIFI MAIN ANTENNA//INPAQ/WA-P-LB-02-799*1 ⚫ LCD TFT 11.6' HD US EDP//INNOLUX/N116BGE-EA2*1 ⚫...