Advertisement
Quick Links
EM-C800
Start Here
IMPORTANT: Before using this product, make sure you read
these instructions and the safety instructions in the online User's
Guide.
This printer is designed for use with Epson
Note:
third-party ink. For important ink information, visit
http://epson.com/epsonink (U.S.) or http://epson.ca/epsonink
(Canada) or see your printer box.
Important Safety Instructions:
should always follow basic safety precautions to reduce the risk of fire,
electric shock, and personal injury, including the following:
• Do not use the Epson product near water.
• Always keep this guide handy.
• Avoid using a telephone during an electrical storm. There may be a
remote risk of electric shock from lightning.
• Do not use a telephone to report a gas leak in the vicinity of the leak.
To reduce the risk of fire, use only a No. 26 AWG or larger
Caution:
telecommunication line cord.
1
Unpack
The product is heavy and should be lifted and moved by
Warning:
two people.
1
Remove all protective materials from the product.
Keep the two protective pieces shown after removing
Note:
them from inside the product. You will need them if you transport
your product. See the online User's Guide for transportation
instructions.
ink packs only, not
®
When using telephone equipment, you
French control
panel sticker
2
Lift up the scanner unit and remove all protective
materials from inside the product, then close the
scanner unit.
3
Insert the output tray, then set it down gently.
2
Turn on and configure
1
Connect the power cord to the back of the product
and to an electrical outlet.
Do not connect to your computer yet.
Caution:
2
Turn on the product.
If an error code appears, turn off the product and
Note:
check that no protective materials have been left inside the
product.
3
Select your language, country, date, and time on the
LCD screen.
You can change these settings later using the
Note:
product's control panel. For more information, see the online
User's Guide.
Advertisement
Related Manuals for Epson WorkForce Pro EM-C800
Summary of Contents for Epson WorkForce Pro EM-C800
- Page 1 • Do not use the Epson product near water. • Always keep this guide handy. • Avoid using a telephone during an electrical storm. There may be a remote risk of electric shock from lightning.
- Page 2 Insert the ink tray into the printer. Repeat steps 2 to 6 for Install ink supply units the other ink packs. (ink packs) Keep the ink packs out of the reach of children and do not Caution: drink the ink. The included initial ink packs are designed for reliable printer Note: setup and cannot be used as replacement ink packs or resold.
- Page 3 The printer is designed to work only with Firmware Update Notice: genuine Epson-branded ink packs. Other brands of ink packs and ink supplies are not compatible and, even if described as compatible, may not function properly or at all. Epson periodically provides firmware...
- Page 4 General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice.