Advertisement
K
BABY
By setting this programme a relative humidity between -3% and +3% can be reached, same characteristics
of the COTTON CUPBOARD DRY, the software adds a fixed time (of 25 minutes). Only one branch of the
heater unit is switched on (the 1400W one), the maximum dry time is 3 hours, the maximum temperature
reached in this cycle is 55°.
If the half-power key is inserted the maximum temperature reached is 50°. The times of motor movement for
this cycle are described in the following table.
90'
By selecting this programme the drying is timed, both branches of the heater unit are switched on, the
conduct metric sensors is disabled, the temperature inside the drum reaches a maximum value of 85° and is
checked by the NTC sensor.
If the half-power key is selected (the branch with less power of the heating unit is not selected) the
maximum temperature reached is 80°.
To dry delicate fabrics with this programme it is advisable to choose the half-power option before starting the
drying cycle. At the end of the cycle there is the cooling phase that lasts 10 minutes.
60'
By selecting this programme the drying is timed, both branches of the heater unit are switched on, the
conduct metric sensors is disabled, the temperature inside the drum reaches a maximum value of 85° and is
checked by the NTC sensor.
If the half-power key is selected (the branch with less power of the heating unit is not selected) the
maximum temperature reached is 80°.
To dry delicate fabrics with this programme it is advisable to choose the half-power option before starting the
drying cycle. At the end of the cycle there is the cooling phase that lasts 10 minutes.
30'
By selecting this programme the drying is timed, both branches of the heater unit are switched on, conduct
metric sensors is disabled, the temperature inside the drum reaches a maximum value of 85° and is
checked by the NTC sensor.
If the half-power key is selected (the branch with less power of the heating unit is not selected) the
maximum temperature reached is 80°.
To dry delicate fabrics with this programme it is advisable to choose the half-power option before starting the
drying cycle. At the end of the cycle there is the cooling phase that lasts 10 minutes.
L
DRY CLEANING
By selecting this programme, the drying lasts 24 minutes, plus 10 minutes of cooling). Only one branch of
the heater unit is switched on (the 1400W one), the conduct metric sensor is disabled, the temperature
inside the drum reaches a maximum value of 65° and is checked by the NTC sensor.
By selecting the half-power option the temperature reached inside the drum is 60°. The times of motor
movement for this cycle are described in the following table.
To start a drying cycle do as follows:
- close the door, push the switch
- select a drying cycle with the selector knob.
- select an option (if necessary):
- delicate drying, when time-cycles are used to dry delicate fabrics.
- no sound if you want to exclude the buzzer during the anti-crease cycle.
- push start key.
SOI/DT 2002-07 dmm
Direct
Pause
90 sec.
6 sec.
Direct
Pause
300 sec.
2 sec.
31/55
Inversion
8 sec.
Inversion
14 sec.
599 35 38-32
Advertisement
