Advertisement
Quick Links
Advertisement
Related Manuals for Asus ROG Zephyrus S17 GX703H Series
Summary of Contents for Asus ROG Zephyrus S17 GX703H Series
- Page 1 ASUS ROG Zephyrus S17(GX703H) Series Service Guide...
- Page 2 LIMITATION OF LIABILITY Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property;...
- Page 3 Disclaimer ASUS is not responsible for direct, indirect, intentional or unintentional damages resulting from improper installation and operation. Safety precautions • Keep liquids or moisture away from your Notebook PC before installing or removing any components. • Ensure to place your Notebook PC on a stable surface before installing or removing any components.
- Page 4 Table of Contents ⚫ Service Overview ⚫ ASUS ROG Zephyrus S17 (GX703H) Series Overview ⚫ Components Top View ⚫ Components Bottom View ⚫ Repair Overview ⚫ Appropriate Tools ⚫ Keyparts and Related Parts ⚫ Disassembly Steps : • BOTTOM CASE •...
- Page 5 Service Overview • Carefully read through this Service Guide for a look at various components of the device before performing any service and repairs. • To provide the best service, we have provided the below information for technicians from distributors and resellers to perform the complete device disassembly and assembly.
- Page 6 ASUS ROG Zephyrus S17 (GX703H) Series Overview Top View Bottom View ❶ Array microphones ❶ Air vents ❷ Camera ❷ Audio speakers ❸ Camera indicator ❸ Compartment cover ❹ Display panel ❺ Audio speakers ❻ Multiwheel ❼ Keyboard ❽ Capital lock indicator ❾...
- Page 7 Components Top View BOTTOM CASE TWEETER SPEAKER KB FFC LCD COVER WIFI CARD TP FFC MIC FPC KB BL FFC WTB CABLE WHEEL ASSY BATTERY BATTERY CABLE 17.3’’ LCD MAIN BOARD PW FFC LED FFC WHEEL BD THERMAL MODULE ASSY LED BOARD WHEEL FFC HALL SENSOR BD...
- Page 8 Components Top View THERMAL SSD PAD WIFI ANTENNA C3 THERMAL SPONGE BTM DOWN BTM RUBBER LCD BEZEL ADHESIVE TOP LCD BEZEL ADHESIVE SIDE MB ACETATE CLOTH WHEEL BD TAPE WIFI ANTENNA C4 TOP ANT GASKET LCD BEZEL ADHESIVE BOTTOM LCD ADHESIVE RF CABLE SD FPC TAPE RF ABSORBOR...
- Page 9 Components Bottom View BOTTOM CASE THERMAL MODULE ASSY 17.3”3 LCD MAIN BOARD LCD COVER KEYBOARD MODULE TOUCHPAD LCD BEZEL LED BOARD TOP CASE HALL SENSOR BOARD WHEEL BD IO BOARD Back...
- Page 10 Repair Overview This chapter describes disassembly and assembly (Assemble document please look up from the last page), please follow the information provided in this section to perform the complete disassembly procedure. Precautions: Before you perform any service or repair on the notebook, please pay special attention to the cautions prevent any damages to the notebook. 1.
- Page 11 Appropriate Tools Please prepare and select the appropriate tools to disassemble/assemble for the ASUS ROG Zephyrus S17 (GX703H) Series notebook. Screwdriver Alcohol 95% Glove Dust-free Cloth Please accord to different screw specification to choose different screwdriver and head. PLASTIC CARD T=0.35mm PLASTIC PICK T=0.5mm...
- Page 12 Appropriate Tools Please prepare and select the appropriate tools to disassemble/assemble for the ASUS ROG Zephyrus S17 (GX703H) Series notebook. ❺ ❼ ❶ ❸ ❷ ❹ ❻ Warning! When the tool is with Liquid Metal residue, please clean tools with dust free cloth and 95%...
- Page 13 BOTTOM CASE Disassembly Notice Step 1 : Unscrew screws *11pcs. Screws Spec Torque (kgf-cm) Step 2 : Use plastic blade to pry the bottom case. M2*9.5L (4.5,0.8) (K)+H T6 2.3±0.2 M2*4L (4.5,0.8) (K)+H T6 2.3±0.2 Retention Screw 2.3±0.2 Start To avoid the bottom case hook, Please follow above arrow direction The screw is unable to remove with using plastic blade to pry bottom...
- Page 14 BATTERY Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Before disassembly battery connector, please be sure to pull out adapter and disconnect the battery more than ten seconds in order to IC damage. Screws Spec Torque (kgf-cm) Step 1 : Disconnect the battery connector.
- Page 15 Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Assembly Notice Step 1 : Remove the screws *3pcs. Step 2 : Remove SSD *3pcs. Please follow below order for SSD installation. Screws Spec Torque (kgf-cm) SSD Slot 1 pcs 2 pcs 3 pcs...
- Page 16 Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Tear off the ABSORBER from DDR. Assembly Notice Step 2 : Unlock DDR and then remove it. Please make sure to paste ABSORBER on, after assembling the DDR.
- Page 17 WIFI CARD Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Assembly Notice Step 1 : Release tape *1pcs. Please according to below image to assemble RF cable. Step 2 : Disconnect the RF CABLE connector. Screws Spec Torque (kgf-cm)
- Page 18 SPEAKER Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Disconnect SPEAKER connector. Assembly Notice Step 2 : Release tapes *2pcs. Step 3 : Remove screws *6pcs. For Speaker assembly, please follow the mark below to tidy cable and Step 4 : Remove SPEAKER.
- Page 19 LED BOARD and HALL SENSOR BOARD Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Disconnect FFC connector, remove screws *2pcs, and then remove LED BOARD. Step 2 : Disconnect FFC connector, remove screws *2pcs, and then remove HALL SENSOR BD and SENSOR BD FFC.
- Page 20 IO BOARD Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Disconnect FFC connector. Screws Spec Torque (kgf-cm) Step 2 : Disconnect WTB CABLE connector. M2*3L (K) B-ZN #1 NY 2.0±0.2 Step 3 : Remove screws *2pcs, and then remove IO BOARD and WTB CABLE. Unscrew (Green circle) Assembly Notice On IO BOARD, please follow the mark below to...
- Page 21 TWEETER SPEAKER (with Main Board、Thermal Module & Fan) Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Release FAN Rubber *1pcs. Screws Spec Torque (kgf-cm) Step 2 : Release tapes *4pcs. M2*3L (K) B-ZN #1 NY 2.0±0.2 Step 3 : Disconnect connector *10pcs.
- Page 22 THERMAL MODULE & FAN Screws Spec Torque (kgf-cm) Disassembly Notice Please be sure to pull out adapter and disconnect the battery. M2*4.5L (4.5,0.8) (K) #1 2.0±0.2 Step 1 : Follow the reverse screw numbers to remove screws *5pcs(Blue circle), and release screws *3pcs(Green circle). Retention Screw 2.0±0.2 Step 2 : Remove the THERMAL MODULE from MB.
- Page 23 MAIN BOARD Mainboard connector placement LED FFC CPU FAN EDP CABLE GPU FAN Supports using JIG BOARD to refresh F1 BIOS K/B FFC SUB IO FFC CABLE PW FFC TP FFC WHEEL FFC KB BL FFC TWEETER SPK CABLE Back...
- Page 24 MAIN BOARD GX703HS MB GPU CPU ABSORBOR GX703HS MB GPU ABSORBOR U Materials on mainboard GX703HS MB TOP KAPTON 80X8 GX703HS MB FOIL GU603HR TGL-H CPU BRACKET ASSY GX703HS MB TOP SPONGE GX703HS MB RAM ABSORBOR GX703HS IO FFC MYLAR GX703HS CPU ABSORBOR GU603HR MB EC MYLAR GX703HS BTM RUBBER 1...
- Page 25 MAIN BOARD Materials on mainboard GX703HS CPU MYLAR TGLK10500 GX703HS GN20-E GPU ABSORBOR *GX703HS GN20-E3 GPU ABSORBOR (For GX703HM/HMD) GX703HS BTM RUBBER 1 GX703HS MB BTM THERMAL GASKET GX703HS MB AUDIO MYLAR Back...
- Page 26 KEYBOARD MODULE Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Release EMI FABRIC tapes*2pcs, remove screws *9pcs, and remove SUB HINGES. Screws Spec Torque (kgf-cm) Step 2 : Disconnect and remove FFC *3pcs, unscrew screws *4pcs and remove WHEEL BD module. Step 3 : Disconnect WHEEL FFC, and remove WHEEL ROD from WHEEL BD.
- Page 27 KEYBOARD MODULE Assembly Notice Please be sure to pull out adapter and disconnect the battery. Please follow the steps to assemble SUB HINGES and Keyboard module. Align and thru cables on keyboard Make sure both HINGE SLOT are Confirm all FFC (Green mark) are installed In the end, paste HINGE EMI FABRIC to Top Case.
- Page 28 KEYBOARD MODULE Assembly Notice Please be sure to pull out adapter and disconnect the battery. Please follow the location below to paste KB BOTTOM HOUSING SPONGE. Please follow the location below to paste HINGE EMI FABRIC L and HINGE EMI FABRIC R .
- Page 29 TOP CASE Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Remove screws *3pcs and remove TOUCHPAD, disconnect TP FFC and remove it from TOUCHPAD. Screws Spec Torque (kgf-cm) Step 2 : Release tapes, and then remove WIFI ANTENNA C3 & C4. Step 3 : Release ACETATE Cloth.
- Page 30 TOP CASE Assembly Notice Please be sure to pull out adapter and disconnect the battery. Please follow each mark to tidy cable and ACETATE Cloth. When assembly the WIFI ANTENNA, please follow EDP Cable(Red line)/ Tweeter Speaker(Green line)/ WIFI Ant C4(Blue line)/ WIFI Ant C3(Yellow line) mark to tidy cable, ANTENNA TAPES (Yellow mark) and TOP ANT GASKET (Red mark).
- Page 31 TOP CASE Assembly Notice Please be sure to pull out adapter and disconnect the battery. When assembly the Top Case, please follow the location below When assembly the Top Case, please follow the location below to paste GX703HS TOP to paste TOP WHEEL TAPE、 RAM TAPE and SSD TAPE. WHEEL MYLAR 2.
- Page 32 LCD BEZEL Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Remove LCD BEZEL. Step 1-4, Due to some tapes behind the lower edge of bezel, please using plastic blade to teardown the bezel. Please follow the direction shown in the red arrow, to move plastic blade from left to right and peel the bezel away slowly.
- Page 33 LCD PANEL Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Remove screws *6pcs, and disconnect connector (Yellow mark). Screws Spec Torque (kgf-cm) Step 2 : Remove Hinge caps *2pcs, and MAIN Hinges *2pcs. M2.5*2.7L (5,0.45) (K)#1 2.3±0.2 Step 3 : Pull out LCD adhesive *2pcs.
- Page 34 LCD PANEL Assembly Notice Please be sure to pull out adapter and disconnect the battery. Please follow the Red line to tidy EDP cable. When reuse the LCD PANEL: Please use the fingertip to clean the residual glue on PANEL or BEZEL. When reuse the LCD COVER: Please paste new PANEL ADHESIVE *2pcs.
- Page 35 LCD COVER Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Disconnect connector, and remove MIC FPC. Step 2 : Remove CAMERA MODULE, and then remove MIC RUBBER *2pcs. Assembly Notice Disconnect (Blue mark) For MIC FPC assembly, please follow the mark below to fix FPC.