If the Hard Disk Activity
Light Does Not Work
3 Troubleshooting Your HP Kayak PC Workstation
If Your PC Workstation Has a Hardware Problem
If the Hard Disk Drive Does not Work
Check that the disk power and data cables are correctly connected
•
(refer to "Connecting Devices" on page 10).
For an IDE drive, check the IDE Device's configuration settings in
•
the Setup program (
For an IDE drive, check the Hardware Protection settings in the
•
Setup program (
For an IDE drive, check the Boot Device Security settings in the
•
Setup program (
For a SCSI drive, check the SCSI Interface settings in the Setup
•
program (
Advanced > External/Internal 16/8 bit SCSI
SCSI Configuration Utility).
If the hard disk activity light does not flicker when the PC Workstation
is accessing the hard disk drive:
Check that the control panel connector is firmly attached to the
•
system board.
Check that the disk power, external start and data cables are
•
correctly connected.
66
English
Advanced > IDE Devices
Security > Hardware Protection
Security > Boot Devices Security
).
).
).
(Symbios) and in the