Table of Contents
Advertisement
Options Adjustments
1
Press to display the Setup menu.
2
Press to select "OSD Language".
3
Press and hold until the Options menu is displayed.
4
Press to select your preferred menu.
5
Press to adjust the menu.
6
Press to exit from Options menu.
Item
Weekly Command Timer Sets Weekly Command Timer. (see page 47)
On:
• Power on display
• Input signal switch display
Onscreen display
• No signal display
• Mute and the remaining time of off-timer after
Off:
Off
Adjusts the input signal when the unit is turned on.
Notes:
Initial INPUT
• Only the adjusted signal is displayed. (see page 15)
• Signal can be displayed when the Terminal board is installed.
• This menu is available only when "INPUT lock" is "Off".
• When a dual input terminal board is attached, A or B is displayed depending on the selected input signal. (Ex. INPUT1A, INPUT1B)
Press
Off
Off:
Initial VOL level
On:
Notes:
• When "Maximum VOL level" is "On", the volume can only be adjusted between 0 and your maximum range.
• You can hear the changed volume regardless of your volume setting before opening the options menu if
you adjust the volume when "Initial VOL level" is "On" and cursor is on the menu.
Press
Off
Off:
On:
Maximum VOL level
Notes:
• If the "Maximum VOL level" is set lower than the "Initial VOL level", the "Initial VOL level" automatically
becomes the same as the "Maximum VOL level".
• The volume display can go up to 63 regardless of the settings.
• You can hear the changed volume regardless of your volume setting before opening the options menu if
you adjust the volume when "Maximum VOL level" is "On" and cursor is on the menu.
44
Displays all the following on screen.
Hides all the items above from view.
PC
INPUT1
INPUT2
button to adjust the volume when the unit is turned on.
On
Sets normal volume.
Sets your preferred volume.
button to adjust the maximum volume.
On
Sets auto maximum volume.
Sets your preferred maximum volume.
Adjustments
was pressed.
INPUT3
Options
Weekly Command Timer
Onscreen display
On
Initial INPUT
O f f
Initial VOL level
Off
0
Off
0
Maximum VOL level
INPUT lock
Off
Button lock
Off
Remocon User level
Off
Options
Off-timer function
Enable
Initial Power Mode
Normal
ID select
0
Remote ID
Off
Serial ID
Off
Display size
Off
Studio W/B
Off
Studio Gain
Off
Options
3/3
Slot power
O f f
Power On Screen Delay
Off
Clock Display
Off
All Aspect
Off
Rotate
Off
Serial Slot Select
Slot1
1/3
2/3
Hide quick links:
Advertisement
Table of Contents
