Page 1
Dell Precision™ Workstations Setup and Quick Reference Guide w w w . d e l l . c o m | s u p p o r t . d e l l . c o m...
Page 2
Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, and Dell Precision are trademarks of Dell Computer Corporation; Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation.
Finding Information and Assistance The following table lists the resources that Dell provides as support tools. Additional resources may be shipped with your computer. What Are You Looking For? • A diagnostic program for my computer • Drivers for my computer •...
Page 6
What Are You Looking For? • Express Service Code and Service Tag Number ® ® • Microsoft Windows License Label • How to reinstall my operating system Setup and Quick Reference Guide Find it Here E x p r e s s S e r v i c e C o d e a n d P r o d u c t K e y The labels are located on your computer under the front-panel door.
Page 7
Support to access the electronic documentation stored on your hard drive. D e l l S u p p o r t W e b s i t e — support.dell.com The Dell Support website provides several online tools, including: •...
Page 8
What Are You Looking For? • System board connectors • Warranty Information • How to use Windows XP • Documentation for my computer and devices Setup and Quick Reference Guide Find it Here S y s t e m I n f o r m a t i o n L a b e l D e l l S y s t e m I n f o r m a t i o n G u i d e W i n d o w s X P H e l p a n d S u p p o r t C e n t e r Click the Start button and then click Help and Support.
Setting Up Your Mini-Tower Computer You must complete all steps to properly set up your computer. M i n i -To w e r C o m p u t e r Fe a t u r e s NOTE: The numbers in the figures correspond to the setup tasks.
Page 10
Connect the keyboard and mouse as shown. Do not connect a Universal Serial Bus (USB) mouse or keyboard to the USB connectors on the front of the computer. NOTE: Do not attempt to operate a PS/2 mouse and a USB mouse simultaneously.
Page 11
Network Adapter and Modem Insert the network cable, not the phone line, into the network connector. If you have an optional modem, connect the phone line to the modem. NOTICE: Do not connect a modem cable to the network adapter. Voltage from telephone communications can cause damage to the network adapter.
Page 12
For setting up dual monitors, see "Dual Monitors" on page 18. NOTE: Some flat-panel displays and graphic cards support Digital Visual Interface (DVI). If your monitor and card have DVI connectors, Dell recommends that you use DVI instead of VGA. Setup and Quick Reference Guide Monitor...
Page 13
Speakers Connect the speakers to the computer as shown on the instructions supplied with the speakers. NOTE: If your computer has an audio expansion card installed, connect external audio devices to the sound card, not to the connectors on the computer back panel.
Page 14
Power Connection Plug in the computer and the monitor to their electrical outlets. Setup and Quick Reference Guide...
Page 15
Power On Press the power button on your computer and monitor to turn them on. hard-drive access light power light Setup and Quick Reference Guide...
Page 16
When you start the computer for the first time, a few system start-up messages may appear, including one that shows your Service Tag and Express Service Code. Your computer is preconfigured with the operating system already installed. Before turning on your computer for the first time, you must complete all the previous setup steps, connecting all devices for your computer.
Page 17
Additional Devices and Software Before you install any devices or software that did not ship with your computer, read the documentation that came with the software or device or contact the vendor to verify that the software or device is compatible with your computer and operating system.
See "Frequently Asked Questions" on page 36 for more information. have DVI connectors, Dell recommends that you use DVI instead of VGA. NOTE: A second monitor...
Setting Up Your Small Desktop Computer You must complete all steps to properly set up your computer. S m a l l D e s k t o p C o m p u t e r Fe a t u r e s Setup and Quick Reference Guide NOTE: The numbers in the figures correspond to...
Page 20
Connect the keyboard and mouse as shown. Do not connect a USB mouse or keyboard to the USB connectors on the front of the computer. NOTE: Do not attempt to operate a PS/2 mouse and a USB mouse simultaneously. Setup and Quick Reference Guide Keyboard and Mouse headphone/speaker connector...
Page 21
Network Adapter and Modem Insert the network cable, not the phone line, into the network connector. If you have an optional modem, connect the phone line to the modem. NOTICE: Do not connect a modem cable to the network adapter. Voltage from telephone communications can cause damage to the network adapter.
Page 22
For setting up dual monitors, see "Dual Monitors" on page 28. NOTE: Some flat-panel displays and graphic cards support Digital Visual Interface (DVI). If your monitor and card have DVI connectors, Dell recommends that you use DVI instead of VGA. Setup and Quick Reference Guide Monitor...
Page 23
Speakers Connect the speakers to the computer as shown on the instructions supplied with the speakers. NOTE: If your computer has an audio expansion card installed, connect external audio devices to the sound card, not to the connectors on the computer back panel.
Page 24
Power Connection Plug in the computer and the monitor to their electrical outlets. Setup and Quick Reference Guide...
Page 25
Power On Press the power button on your computer and monitor to turn them on. power light hard-drive access light Setup and Quick Reference Guide...
Page 26
When you start the computer for the first time, a few system start-up messages may appear, including one that shows your Service Tag and Express Service Code. Your computer is preconfigured with the operating system already installed. Before turning on your computer for the first time, you must complete all the previous setup steps, connecting all devices for your computer.
Page 27
Additional Devices and Software Before you install any devices or software that did not ship with your computer, read the documentation that came with the software or device or contact the vendor to verify that the software or device is compatible with your computer and operating system.
See "Frequently Asked Questions" on page 36 for more information. have DVI connectors, Dell recommends that you use DVI instead of VGA. NOTE: A second monitor...
Safety First—For You and Your Computer While working inside your computer, do not attempt to service the computer except as explained in this guide and elsewhere in Dell documentation. Always follow the instructions closely. Working inside your computer is safe—if you observe the following precautions.
Opening the Cover NOTE: On the small desktop computer, remove the stand before you open the cover. On the mini- tower computer, place the computer on its side before you open the cover. M i n i -To w e r C o m p u t e r Setup and Quick Reference Guide Turn off the computer and devices, disconnect them from their electrical outlets, and wait 10 to 20 seconds.
Page 31
S m a l l D e s k t o p C o m p u t e r Setup and Quick Reference Guide...
power supply padlock ring AC power connector back-panel connectors Setup and Quick Reference Guide Inside Your Computer M i n i -To w e r C o m p u t e r removable media drive system board microprocessor airflow shroud PCI expansion-card slots floppy drive hard drive...
S m a l l D e s k t o p C o m p u t e r memory modules microprocessor back-panel connectors padlock ring low profile AGP slot AC power connector Removing and Installing Parts Instructions for removing and installing various parts are located in the User’s Guide.
• To access the User’s Guide from your hard drive: NOTE: You can also access the User’s Guide from the Dell Precision ResourceCD or support.dell.com. See To print the entire User’s Guide from Internet Explorer, select Print all "Finding Information and linked documents in the Print window.
Page 35
To run ZZTOP , insert the ResourceCD, select Start Resource CD Menu from the main menu, and then select Start ZZTOP Imaging See "Using the Dell Precision ResourceCD" on page 40 for more information on using the ResourceCD. NOTICE: The following process erases all of the information on your hard drive.
Frequently Asked Questions Problem? Try... How do I use my Dell See "Using the Dell Precision Precision ResourceCD? ResourceCD" on page 40 for more information. Where can I find a Depending on your detailed User’s Guide operating system, double- for my computer? click the User’s Guides icon...
Page 37
How do I open the See "Opening the Computer computer? Cover" on page 29. Or try the Dell Precision Or try the Dell Support Site ResourceCD Go to the main menu on the Go to support.dell.com. At the Dell Precision ResourceCD.
Page 38
Setup and Quick Reference Guide Or try the Dell Precision Or try the Dell Support Site ResourceCD Go to the main menu on the Go to support.dell.com. At the Dell Precision ResourceCD.
If a computer problem occurs that you are unable to resolve through the steps in this section or the procedures in "Finding Solutions" in your User’s Guide, complete the following steps before you contact Dell: Write a detailed description of the error, beep code, or diagnostic light problem.
Setup and Quick Reference Guide Insert the Dell Precision ResourceCD into the CD drive. If you are using the Dell Precision ResourceCD for the first time on this computer, the ResourceCD Installation window opens to inform you that the ResourceCD is about to begin installation.
Start the Dell Diagnostics from either your hard drive or from the Drivers and Utilities CD (also known as the ResourceCD). Starting the Dell Diagnostics From Your Hard Drive Shut down and restart the computer.
Page 42
ResourceCD menu. Type to start the Dell Diagnostics. Select Run the 32 Bit Dell Diagnostics from the numbered list. If multiple versions are listed, select the version appropriate for your platform. When the Dell Diagnostics Main Menu appears, select the test you want to run.
Page 43
Allows you to customize the test by changing the test settings. When the tests are completed, if you are running the Dell Diagnostics from the Drivers and Utilities CD, remove the CD. Close the test screen to return to the Main Menu screen. To exit the Dell Diagnostics and restart the computer, close the Main Menu screen.
S y s t e m L i g h t C o d e s Power Light Hard-Drive Light Cause Solid green Blinking green Blank Blinks green several times and then turns off Setup and Quick Reference Guide Messages and Codes Your application programs, operating system, and computer can identify problems and alert you to them.
Page 45
POST The Dell Diagnostics is running a test, or a device on the system board may be faulty or incorrectly installed. A power supply or system board failure exists.
Page 46
Diagnostic Lights When you turn on your computer, it performs a series of self-diagnostic tests. A successful power-on self-test (POST) ends with a single beep that signifies the start of normal operation. If the computer fails to complete the POST, a series of lights located on the computer can help you understand which test failed or why the computer stopped responding.
Page 47
D i a g n o s t i c L i g h t C o d e s D u r i n g P O S T Light Pattern Cause yellow Possible microprocessor failure. yellow green yellow yellow Possible memory failure.
Page 48
D i a g n o s t i c L i g h t C o d e s D u r i n g P O S T Light Pattern System Messages If an error occurs during start-up, a message may be reported on the monitor identifying the problem.
Page 49
Beep Codes If an error occurs during start-up that cannot be reported on the monitor, your computer may emit a beep code that identifies the problem. The beep code is a pattern of sounds: for example, one beep, followed by a second beep, and then a burst of three beeps (code 1-1-3) means that the computer was unable to read the data in nonvolatile random-access memory (NVRAM).
Page 56
緐緐緐緐緐緐 • 快速服务代码和服务标签号码 ® ® • Microsoft Windows 许可标签 • 如何重新安装操作系统 安装与快速参考指南 緐緐緐緐緐緐緐 緐緐緐緐緐緐緐緐緐緐緐 标签位于计算机的前面板护盖下方。 Operating System CD 緐緐緐緐緐緐緐 如果您重新安装操作系统,请使用 Drivers and Utilities CD 为计算 机附带的设备重新安装驱动程序。...
Page 57
緐 User's Guide 緐緐緐緐緐緐緐緐緐 双击桌面上的緐 User's Guides 緐緐緐緐緐緐緐图标,或者单击 緐 Start 緐緐緐緐緐按钮并单击緐 Help and Support 緐緐緐緐緐緐緐緐 (视操作系统而定),访问存储在硬盘驱动器上的电子说明文件。 Dell 緐緐 Web 緐緐 — support.dell.com Dell 支持 Web 站点提供了几种联机工具,包括: • 知识库 — 提示、技巧与联机课程 • 客户论坛 — 与其他 Dell 客户进行联机讨论 • 升级 — 内存、硬盘驱动器和操作系统等组件的升级信息...
Page 58
緐緐緐緐緐緐 • 主机板连接器 • 保修信息 • 如何使用 Windows XP • 适用于计算机和设备的说明文件 安装与快速参考指南 緐緐緐緐緐緐緐 緐緐緐緐緐緐 Dell 緐緐緐緐緐緐 Windows XP 緐緐緐緐緐緐緐 单击緐 Start 緐緐緐緐緐按钮,然后单击緐 Help and Support 緐 緐緐緐緐緐緐緐。 键入说明问题的字词,然后单击箭头图标。 单击说明问题的主题。 按照屏幕上显示的说明进行操作。...
Errors 显示遇到的错误、错误代码以及问题描述。 (错误) Help (帮助) 对检测程序进行说明,可能还会提示运行检测程序所 需满足的要求。 Configuration 显示选定设备的硬件配置。 (配置) Dell 诊断程序通过系统设置程序、内存和各种内部检测 程序获得所有设备的配置信息,然后将其显示在屏幕 左窗格的设备列表中。设备列表可能不会显示计算机 中安装的所有组件或计算机连接的所有设备的名称。 Parameters 使您可以通过更改检测程序设置来自定义检测。 (参数) 如果您通过 Drivers and Utilities CD 运行 Dell 诊断程序,请在完成 检测后取出该 CD 。 关闭检测程序屏幕即可返回緐 Main Menu 緐緐緐緐緐緐屏幕。要退 出 Dell 诊断程序并重新启动计算机,请关闭緐 Main Menu 緐緐緐 緐緐緐屏幕。...
Page 134
Dell Precision ResourceCD support.jp.dell.com • • Internet Explorer • • ® Windows NT <L>...
Page 135
Windows 2000 Windows XP <F8> <Enter> <L> • Windows NT ZZTop ZZTOP Start Resource CD Menu Imaging SW ResourceCD • • ResourceCD Start ZZTOP Dell Precision ResourceCD...
Page 143
Dell Drivers and Utilities CD DELL Windows Windows <Enter> Boot ResourceCD Dell Dell <F12> Boot to Utility Partition 診断プログラムを起動する場合 <F12> IDE CD-ROM Device IDE CD-ROM Device Boot from CD-ROM Run the 32 Bit Dell Diagnostics Drivers and Utilities CD Dell...
Page 144
診断プログラムメインメニュー Dell Dell Express Test Extended Test Custom Test Symptom Tree Custom Test Symptom Tree Results Errors Help Main Menu Express Test Dell...
Page 145
Configuration Dell Parameters Drivers and Utilities CD Menu システムライト Dell Main Menu Dell Main 、...