Table of Contents
Advertisement
4
lower 3.5-inch drive
bay
5
hard drive activity
light
6
IEEE 1394 connector
(optional)
7
USB 2.0 connectors
(2)
8
Dell badge (rotatable) Use the plastic handle on the back of the Dell badge to
9
power button
22
About Your Computer
Supports a floppy drive or a Media Card Reader.
The hard drive activity light is on when the computer
reads data from or writes data to the hard drive. The
light may also be on when a device such as an optical
drive is in operation.
Use the optional IEEE 1394 connector for high-speed
data devices such as digital video cameras and external
storage devices.
Use the front USB connectors for devices that you
connect occasionally, such as flash memory keys or
cameras, or for bootable USB devices (see "System
Setup" on page 81 for more information on booting to
a USB device).
NOTE:
It is recommended that you use the back USB
connectors for devices that typically remain connected,
such as printers and keyboards.
rotate the badge for tower-to-desktop or desktop-to-
tower conversion.
Press to turn on the computer.
NOTICE:
To avoid losing data, do not use the
power button to turn off the computer. Instead,
perform an operating system shutdown.
NOTICE:
If your operating system has ACPI
enabled, when you press the power button the
computer will perform an operating system
shutdown.
NOTE:
The power button can also be used to wake the
system or to place it into a power-saving state (see
"Power Management" on page 40 for more information).
Advertisement
Table of Contents
Troubleshooting
