ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.
Contents 1 Introduction................1 SIM Card................1 microSD Card ...............2 Charging the Battery ............3 Your Phone ................4 Keys and Functions...............5 Touch Screen................5 Calibrating the Screen ............6 Home Screen ...............6 2 Getting Started ................ 8 Powering On or Off the Phone ..........8 Phone Password ..............8 PIN and PUK ................9 Locking the Screen and the Keypad ........9...
Page 5
5 Messaging ................15 6 Contacts................16 7 Camera.................. 18 Taking a Picture ..............18 Recording a Video Clip ............19 8 Media Player ................20 Creating a New Playlist ............20 Playing a Media File............20 Media Player ..............21 SRS ..................22 9 FM Radio................23 FM Radio ................23 Tuning ................24 10 WAP..................
Introduction All the images in this guide are provided only for your reference. The actual appearance and display depends on the phone that has been delivered. SIM Card Insert your SIM card before using your phone. Remove the SIM card and the battery only after powering off your phone.
microSD Card Your phone supports a microSD card with a capacity of up to 4 GB. The following figure shows the insertion of the microSD card. The microSD card is optional. You may not find a microSD card in the package. If a microSD card is required, you can buy one.
Charging the Battery You can use the lithium battery of the mobile phone immediately after unpacking. A new battery performs best after it is fully charged and discharged three times. During the charging process, the charging icon is in an animated state.
Your Phone The following figure shows the appearance of your phone and it is provided only for your reference. Earpiece Screen Confirm key Call/Answer key End/Power key Volume/Scroll key Hand-strap hole Charger/USB interface Headset jack...
Keys and Functions Press… To… Make a call, or answer an incoming call. View call logs in standby mode. Power on or power off the phone (by pressing and holding it for about three seconds). End a call, or reject an incoming call. Lock keys and the screen in standby mode.
Calibrating the Screen The phone can respond to the touch on the screen accurately after screen calibration. in standby mode, and then select Settings > Pen calibration. Tap the cross marks that appear on the screen in sequence according to the prompts that are displayed to complete adjusting the phone display.
Using the Function Menu In standby mode, tap to display function menus. to display the selected menu, and tap to return to the previous menu. Icons The following table includes most of the commonly used icons. Icon Indicates Signal strength Battery power level GPRS A new multimedia message (MMS) is incoming.
Getting Started Powering On or Off the Phone To switch on your phone, press and hold for about three seconds. If a prompt is displayed, enter your phone password or personal identification number (PIN). The PIN is delivered with the SIM card.
PIN and PUK The personal identification number (PIN) protects your SIM card from unauthorized use. The PIN unblocking key (PUK) can unlock the blocked PIN. Both the PIN and the PUK are provided with the SIM card. For details, contact your service provider. If you enter wrong PINs for a specified number of times consecutively, the phone displays a prompt asking you to enter the PUK.
Voice Services On-screen Numeric Keypad In standby mode, tap to access the on-screen numeric keypad. 1 Number keys. To enter phone numbers. To call the voicemail by tapping and holding the 1 key for about three seconds. 2 * key: to enter * by tapping it once, + by tapping it twice, P by tapping it three times, or W by tapping it four times.
Making a Call in standby mode. Enter the phone number. To make an international call, tap twice consecutively to enter the international call prefix (+). Then enter the country or region code, area code, and phone number in sequence. To call an extension, enter the phone number, tap three times consecutively to enter P or four times consecutively to enter W, and then enter the extension number.
Answering a Call When there is an incoming call, you can do as follows: Press to answer the call. Press to reject the call to answer the call. to reject the call. to mute the ring. to enter the phone number or select a contact from the phonebook to make a new call.
Text Entry Text Entry Screen To enter a question mark (?). To enter an exclamatory mark (!). To enable or disable predictive text input mode. To switch between the upper case and the lower case. To close the on-screen keypad. To display the number and symbol panel.
Copying and Cutting Text To copy or cut all the text, tap and hold the text area for about three seconds, and then press the Copy all or Cut all button To select the text you want to copy or cut, move the cursor to the beginning of the text, tap and hold the screen for about three seconds, move the cursor to the end of the text, and then press the Copy or Cut button.
To enter numbers, or commonly used punctuations. To display or close the graphics symbols. To close the on-screen keypad. To close the number and symbol panel. To enter a space. To turn pages. To enter a newline sign. To clear the character on the left of the cursor. Tap and hold the key for about three seconds to clear all the characters.
Before creating and sending multimedia messages, contact your service provider for the availability of the Multimedia Messaging Service (MMS) and the method of subscribing to the services. Open multimedia messages with caution. Multimedia messages may contain objects that can damage your phone, such as malicious software.
Creating a Contact , and then select Add new contact. Edit the contact. After editing the contact, press and then select Done. to save the contact. If your phone supports two SIM cards and if the dual-SIM mode is enabled, you may need to select To SIM1 or To SIM2. Searching for a Contact Enter the contact name or the first consecutive letters of the name, and then select the contact from the list.
Camera Taking a Picture in standby mode, and then select Camera. To adjust the brightness. To view photos, or perform camera or photo settings. To take a picture. You can also press to take pictures. To set continuous shooting. To set the self-timer. To set the white balance.
Recording a Video Clip in standby mode, and then select Video camera. To adjust the focus. To adjust the brightness. To set the video quality. To enable or disable the night mode. To set the white balance. To view videos, or perform camera or video settings. To start recording the video clip.
Media Player in standby mode, and then select Media player. Creating a New Playlist in standby mode, and then select Media player > My playlists. , and then select New. Edit the playlist name. , and then select Done. Tap the playlist to display it. , and then select Add.
Media Player To indicate the number of the current media file and total number of the media files in the playlist. To indicate the artist To indicate the album To indicate the played duration and playing progress of the current media file. To play media files randomly.
13 To switch to the full-screen mode. You can also press the confirm key to switch to or exit the full-screen mode. 14 To indicate the name of the current media file. WOW HD, SRS and the symbol are trademarks of SRS Labs, Inc.
FM Radio Before using the FM radio, connect a compatible headset to your phone. The headset cable also functions as an antenna. To ensure good reception of radio programs and superior audio quality, do not disconnect the headset from your phone or bend the headset cable with force.
When listening to the FM radio, press to adjust the volume. Tuning If there is no channel in the channel list, tap , and then select from the following options: Auto search: to search for channels automatically and save them to the channel list.
Setting the Connection Profile To access WAP sites on your phone, you need to set your account information first. The account information is provided by your service provider. in standby mode, and then select WAP > Internet service > Settings > Profiles. Select the profile you need.
Connectivity When connected to the PC with the USB data cable, your phone can be used as a USB flash drive. In this case, you can read and manage the files stored in the phone memory or on the microSD card on the computer.
Using a Bluetooth Headset After a Bluetooth headset is paired with and connected to the phone, the headset icon is displayed on the standby screen. Then, you can use the headset for communication. Enable the Bluetooth function. Select Search audio device. Tap your Bluetooth headset to connect it.
Warnings and Precautions This section contains important information pertaining to the operating instructions of your device. It also contains information about how to use the device safely. Read this information carefully before using your device. Electronic Device Power off your device if using the device is prohibited. Do not use the device when using the device causes danger or interference with electronic devices.
using the device, watch out for areas that have potentially explosive atmospheres that are often, but not always, clearly marked. Such locations include areas below the deck on boats, chemical transfer or storage facilities, and areas where the air contains chemicals or particles such as grain, dust, or metal powders.
The device complies with the RF specifications when the device is used near your ear or at a distance of 1.5 cm from your body. Ensure that the device accessories such as a device case and a device holster are not composed of metal components. Keep your device 1.5 cm away from your body to meet the requirement earlier mentioned.
Battery and Charger Unplug the charger from the electrical plug and the device when not in use. The battery can be charged and discharged hundreds of times before it eventually wears out. When the standby time and the talk time are shorter than the normal time, replace the battery. Use the AC power supply defined in the specifications of the charger.
Otherwise, it may lead to a short circuit, a malfunction of the device, and an electric shock to the user. Do not place your device, battery, and charger in places where they can get damaged because of collision. Otherwise, it may lead to battery leakage, device malfunction, overheating, fire, or explosion.
Your device is a low-power radio transmitter and receiver. As recommended by international guidelines, the mobile device is designed not to exceed the limits for exposure to radio waves. These guidelines were developed by the independent scientific organization International Commission on Non-Ionizing Radiation Protection (ICNIRP) and include safety measures designed to ensure safety for all users, regardless of age and health.
Warning: Changes or modifications made to this device not expressly approved by Huawei Technologies Co., Ltd. may void the FCC authorization to operate this device. Disposal and Recycling Information This symbol on the device (and any included batteries) indicates that they should not be disposed of as normal household garbage.
You are recommended to visit the Web site regularly for up-to-date information. EU Regulatory Conformance Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For the declaration of conformity, visit the Web site www.huaweidevice.com/certification.