Honeywell TE923WD - Display Unit For Professional Weather Station TE923W User Manual
Remote anemometer
Hide thumbs
Also See for TE923WD - Display Unit For Professional Weather Station TE923W:
- User manual (10 pages)
Related Manuals for Honeywell TE923WD - Display Unit For Professional Weather Station TE923W
Summary of Contents for Honeywell TE923WD - Display Unit For Professional Weather Station TE923W
- Page 1 HONEYWELL REMOTE ANEMOMETER For Professional Weather Station TE923W TS805 USER MANUAL...
-
Page 2: Table Of Contents
Table of Contents Introduction Standard Package Contents Before you begin Installation Operation Maintenance Troubleshooting PRECAUTIONS Specifications FCC STATEMENT DECLARATION OF CONFORMITY STANDARD WARRANTY INFORMATION... -
Page 3: Introduction
Introduction Thank you for selecting the Honeywell remote anemometer TS805. This product is a part of the Professional Weather Station TE923W. It measures wind speed & direction and transmits data to a TE923WD (main display unit). Note: In order to display the wind speed, direction and related item, you must own a main display unit (TE923WD) for the Professional Weather Station TE923W. -
Page 4: Before You Begin
A. WIND VANE Measures wind direction B. WIND CUPS Measures wind speed C. ANEMOMETER BASE • Holds battery compartment • Allows mounting the anemometer vertically D. ANEMOMETER ARM Keeps anemometer assembly together E. WIND CUPS SHAFT Holds wind cups on the anemometer arm F. -
Page 5: Installation
IMPORTANT: Make sure that the remote anemometer is accessible for cleaning and maintenance. Installation The Honeywell Remote Anemometer TS805 operates at 433MHz radio frequency, so no wire installation is required between the main unit (receiver) and the remote anemometer (transmitter). -
Page 6: Operation
• Select the factory set mode. It will be also a default setting in the future. • Set current wind direction as NORTH. • Press DOWN button either on the main unit control panel or handheld remote control. The wind speed reading (usually 0.0) will appear in the wind window if TE923W main unit display, instead of dashes “- - -“. - Page 7 To access wind mode from the main unit press UP or DOWN until the icon on the display starts flashing. From the handheld remote control: Press Configuring Wind Display In the Wind Mode press the SET button to recall either a wind chill temperature with wind direction in bearings, a wind chill temperature with a wind direction in compass points, a temperature at anemometer and wind direction in compass points or a temperature at anemometer and wind direction in bearings.
-
Page 8: Maintenance
flash. • Set the alert using the UP or DOWN. Press and hold either button for fast digits advance. • Press ALARM/CHART to confirm your selection and return to the wind alert selection screen. Disabling the Wind Alert To disable wind alert press ALARM/CHART. Maintenance Changing Batteries The battery status of the remote anemometer is checked every hour. -
Page 9: Specifications
• Do not clean the units with abrasive or corrosive materials. They may scratch the plastic parts and corrode the electronic circuits. • Do not subject the product to excessive force, shock, dust, temperature, or humidity, which may result in malfunctions, shorter lifespan, damaged batteries, and damaged parts. -
Page 10: Declaration Of Conformity
NOTE: This equipment had been tested and found to comply with the limits for a Class B Digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment, installed and used in accordance with the instructions, may cause harmful interference to radio communications. -
Page 11: Standard Warranty Information
Copyright (2006) Hideki Electronics Inc. All Rights Reserved. The Honeywell Trademark is used under license from Honeywell Intellectual Properties Inc. Honeywell International Inc. makes no representations or warranties with respect to this product. All user manual contents and information are subject to change.