Acer PD116P Quick Start
Pd116p quick start guide
Hide thumbs
Also See for PD116P:
- Service manual (64 pages) ,
- User manual (34 pages) ,
- Quick start manual (4 pages)
Advertisement
Quick Links
INSTALLATION
1. Power Cord
2. VGA Cable
3. Composite Video Cable
4. USB Cable
5. VGA to Component/HDTV Adapter
6. S-Video Cable
7. Audio Cable Jack/Jack
8. RS232 Cable (Optional Accessory)
9. DVI Cable (Optional Accessory)
INTERFACE CONNECTOR
Connecting to a Computer
1. Ensure the projector and your
computer are turned off.
2. Connect one end of the VGA cable
to the "VGA In" connector on the
projector; connect the other end to
the VGA connector on the
computer and tighten the screws.
3. Connect one end of the power
cord into the AC power socket on
the projector; connect the other
end to an electrical outlet.
Powering On the Projector
Quick Start
1. Remove the lens cap.
2. Turn on the projector first and then
3. Adjust the position, focus and zoom.
4. Run you presentation.
1. Press the power button twice.
2. Do not remote AC power cord from
1
USB
RGB
RS232
8
4
2 9
7
3
6
Video Output
Powering On the Projector
the computer.
Powering Off the Projector
outlet until the projector fan shut
down.
DVI
DVD Player,
Settop Box,
HDTV receiver
5
S-Video Output
Advertisement
