Sony Ipela SNC-CH280 Installation Manual
Hd
Hide thumbs
Also See for Ipela SNC-CH280:
- User manual (130 pages) ,
- Release notes (27 pages) ,
- Quick reference (20 pages)
Advertisement
Quick Links
Download this manual
See also:
User Manual
4-174-242-13 (1)
Network Camera
Installation Manual
Before operating the unit, please read this manual thoroughly and
retain it for future reference.
SNC-CH180/CH280
2010 Sony Corporation
Printed in China
Owner's Record
The model and serial numbers are located on the camera stand. Record
these numbers in the spaces provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding
this product.
Model No.
Serial No.
WARNING
To avoid electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.
WARNING
This installation should be made by a qualified service person and should
conform to all local codes.
WARNING
A readily accessible disconnect device shall be incorporated external to the
equipment.
CAUTION
The rating label is located on the camera stand.
CAUTION for LAN port
For safety reason, do not connect the LAN port to any network devices that
might have excessive voltage.
The LAN port of this unit is to be connected only to the devices whose
power feeding meets the requirements for SELV (Safety Extra Low Voltage)
and complies with Limited Power Source according to IEC 60950-1.
Power Supply
Caution for U.S.A. and Canada
The SNC-CH180/CH280 operates on 24 V AC or 12 V DC.
The SNC-CH180/CH280 automatically detects the power.
In the USA, this product shall be powered by a UL listed Class 2 Power Supply
Only.
In Canada, this product shall be powered by a CSA Certified Class 2 Power
Supply Only.
Caution for other countries
The SNC-CH180/CH280 operates on 24 V AC or 12 V DC.
The SNC-CH180/CH280 automatically detects the power.
Use a power supply rated 24 V AC or 12 V DC which meets the requirements
for SELV (Safety Extra Low Voltage) and complies with Limited Power Source
according to IEC 60950-1.
For customers in the U.S.A.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
You are cautioned that any changes or modifications not expressly approved
in this manual could void your authority to operate this equipment.
All interface cables used to connect peripherals must be shielded in order to
comply with the limits for a digital device pursuant to Subpart B or Part 15 of
FCC Rules.
For customers in Canada
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
For the customers in Europe
The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-
ku, Tokyo, Japan.
The Authorized Representative for EMC and product safety is Sony
Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
For any service or guarantee matters please refer to the addresses given in
separate service or guarantee documents.
For the customers in Europe, Australia and New Zealand
WARNING
This is a Class A product. In a domestic environment, this product may cause
radio interference in which case the user may be required to take adequate
measures.
In the case that interference should occur, consult your nearest authorized
Sony service facility.
This apparatus shall not be used in the residential area.
ATTENTION
The electromagnetic fields at specific frequencies may influence the picture
of the unit.
Notes on Use
Before Use
Do not lift the camera by only holding the cables.
If you find condensation before use, turn on the power after leaving it out for
long enough.
Data and security
You should keep in mind that the images or audio you are monitoring may be
protected by privacy and other legal rights, and the responsibility for making
sure you are complying with applicable laws is yours alone.
Access to the camera is protected only by a user name and the password
you set up. No further authentication is provided by the camera nor should
you presume that any other protective filtering is done by the service. Since
the service is Internet-based, there is a risk that the image or audio you are
monitoring can be viewed or used by a third-party via the network.
SONY IS NOT RESPONSIBLE, AND ASSUMES ABSOLUTELY NO LIABILITY TO YOU
OR ANYONE ELSE, FOR SERVICE INTERRUPTIONS OR DISCONTINUATIONS OR
EVEN SERVICE CANCELLATION. THE SERVICE IS PROVIDED AS-IS, AND SONY
DISCLAIMS AND EXCLUDES ALL WARRANTIES, EXPRESS OR IMPLIED, WITH
RESPECT TO THE SERVICE INCLUDING, BUT NOT LIMITED TO, ANY OR ALL
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR THAT IT WILL OPERATE ERROR-FREE OR CONTINUOUSLY.
Security configuration is essential for wireless LAN. Should a problem
occur without setting security, or due to the limitation of the wireless LAN
specifications, SONY shall not be liable for any damage, loss of recorded data
or restoration thereof.
Always make a test recording, and verify that it was recorded successfully.
SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT
LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF FAILURE
OF THIS UNIT OR ITS RECORDING MEDIA, EXTERNAL STORAGE SYSTEMS OR
ANY OTHER MEDIA OR STORAGE SYSTEMS TO RECORD CONTENT OF ANY TYPE.
Always verify that the unit is operating properly before use. SONY WILL NOT
BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT
OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE
WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY
OTHER REASON WHATSOEVER.
If you lose data by using this unit, SONY accepts no responsibility for
restoration of the data.
Personal information
The images taken by the system using this device can identify individuals
and thus they fall under "personal information" stipulated in the "Act on
the Protection of Personal Information". Please handle the video data
appropriately according to law.
Information recorded using this product may also be "personal information".
Upon disposal, transfer, repair, or any other occasion where this product or
storage media is passed on to a third party, practice due care in its handling.
Operating or storage location
Avoid operating or storing the camera in the following locations.
Extremely hot or cold places (Operating temperature: –30°C to +50°C [–22°F to
+122°F])
Close to heating equipment (e.g., near heaters)
Close to sources of strong magnetism
Close to sources of powerful electromagnetic radiation, such as radios or TV
transmitters
Locations subject to strong vibration or shock
Locations subject to steam or high humidity
Locations subject to strong wind, such as high places
Locations where corrosive gas or flammable gas is emitted, or where salt
damage may occur
Camera setting
Don't touch the PCB board by hand directly.
If the camera do not focus well because of the weather (such as rain), adjust
the focus manually.
Ventilation
To prevent heat buildup, do not block air circulation around the camera.
Transportation
Always turn off the power when carrying.
When transporting the camera, repack it as originally packed at the factory or
in materials of equal quality.
Using in cold climates
This device is equipped with a built-in heater which automatically operates
when the internal temperature drops significantly low (not in PoE). However, the
heater may not defrost snow and frost attached on the lens cover under certain
environment condition.
Starting and closing under low temperature
When started under temperature conditions of −10°C (14°F) or below, the
camera system may not start operating immediately after start-up. In such a case,
the heater starts and raises the internal temperature, starting the camera system.
It may take about two hours for the camera system to start streaming normal
images.
Using the optional SNCA-CFW5* Wireless Card or CF Memory
Card**
The optional SNCA-CFW5* Wireless Card or CF Memory Card** can be used
only when the power is supplied from AC 24 V or DC 12 V.
If the camera is powered by PoE and you want to use the optional
SNCA-CFW5* Wireless Card or CF Memory Card**, you need to first power off
the camera and then restart it with AC 24 V or DC 12 V power supply.
Attach the CF card slot cover securely to the camera.
* SNCA-CFW5 is not available in some countries and areas. For details, contact
your authorized Sony dealer.
** For inquiries regarding verified CF memory cards, contact your authorized
Sony dealer.
Cleaning
Use a blower to remove dust from the lens cover.
Use a soft, dry cloth to clean the external surfaces of the camera. Stubborn
stains can be removed using a soft cloth dampened with a small quantity of
detergent solution, then wipe dry.
Do not use volatile solvents such as alcohol, benzene or thinners as they may
damage the surface finishes.
Note on laser beams
Laser beams may damage image sensors. You are cautioned that the surface of image
sensors should not be exposed to laser beam radiation in an environment where a laser
beam device is used.
Phenomena Specific to Image Sensors
The following phenomena that may occur in images are specific to image
sensors. They do not indicate a malfunction.
White flecks
Although the image sensors are produced with high-precision technologies, fine
white flecks may be generated on the screen in rare cases, caused by cosmic rays,
etc.
This is related to the principle of image sensors and is not a malfunction.
The white flecks especially tend to be seen in the following cases:
- when operating at a high environmental temperature
- when you have raised the gain (sensitivity)
- when using the slow shutter
Aliasing
When fine patterns, stripes, or lines are shot, they may appear jagged or flicker.
About the Supplied Manuals
Installation Manual (this document)
This Installation Manual describes the names and functions of parts and controls
of the Network Camera, gives connection examples and explains how to set up
the camera. Be sure to read the Installation Manual before operating.
User's Guide (stored in the CD-ROM)
The User's Guide describes how to set up the camera and how to control the
camera via a Web browser.
After installing and connecting the camera correctly, operate referring to this
User's Guide.
Using the CD-ROM Manuals
The supplied CD-ROM disc includes the User's Guides for this unit in PDF format.
Preparations
The Adobe Reader Version 6.0 or higher must be installed on your computer in
order to use the guides stored in the CD-ROM disc.
Note
If Adobe Reader is not installed, it may be downloaded from the following URL:
http://www.adobe.com/
Reading the manual in the CD-ROM
1
Insert the CD-ROM in your CD-ROM drive.
A cover page appears automatically in your Web browser.
If it does not appear automatically in the Web browser, double-click on the
index.htm file on the CD-ROM.
2
Select and click on the manual that you want to read.
This opens the PDF file of the manual.
Clicking an item in the Table of Contents allows you jump to the relevant
page.
Notes
The files may not be displayed properly, depending on the version of Adobe
Reader. In this case, install the latest version, which you can download from
the URL mentioned in "Preparations" above.
If you have lost or damaged the CD-ROM, you can purchase replacement.
Contact your Sony service representative.
Adobe and Acrobat Reader are trademarks of Adobe Systems Incorporated in the
United States and/or other countries.
Location and Function of Part
Front
Audio cable (supplied)
The connector with the longer cable (SP) is used for the line output
connector, and the shorter cable (MIC) is used for the microphone/line input
connector.
SP terminal (minijack, monaural)
Connect a commercially available speaker system with a built-in amplifier.
MIC terminal (minijack, monaural)
Connect a commercially available microphone. This jack supports plugin-
power microphones (rated voltage: 2.5 V DC).
I/O (Input/Output) cable (supplied)
This cable is provided with a sensor input and two alarm outputs.
The wires of the cable control the following signals.
Color of wire
Name
Red
Sensor In +
White
Sensor In – (GND)
Black
Alarm Out 1 +
Yellow
Alarm Out 1 –
Brown
Alarm Out 2 +
Green
Alarm Out 2 –
For details on each function and required settings, see the User's Guide stored
in the supplied CD-ROM.
For the wiring, see "Connecting the I/O cable. "
Fall-prevention wire rope mounting screw hole
When installing the camera to the ceiling or the wall, secure the supplied fall-
prevention wire rope to this hole using the supplied screw.
Lens cover
LAN cable (RJ-45) (supplied)
Connect this cable to a hub or computer on the 10BASE-T or 100BASE-TX
network using a network cable (UTP, category 5).
Power input cable (supplied)
Connect this cable to a 24 V AC or 12 V DC power supply system.
You can screw an extension cable in the connector tip attached at the end of
the cable.
BNC cable (supplied)
Outputs a composite video signal.
Note
The output image is mainly used to adjust the view angle, and may not
display correctly, depending on the video format and image size settings.
The image may not display properly in the horizontal and/or vertical plane.
The image may be reduced.
Camera stand
Caution
Take care not to trap the cables between the camera and the ceiling or
the wall. If the cable is trapped, it may cause a fire or electric shock due to
breaking.
Camera
Wireless/CF card (not supplied)
Back
Rating Label (rear side)
This label shows the name of device and its electric rating.
CF card slot cover
To remove the CF card slot cover, with the supplied wrench remove the
two screws on the cover, and then pull out the CF card slot cover from
the back of the camera. When reinstalling the CF card slot cover, be sure
the waterproof washer is at the original place and the cover is completely
closed.
Note
For the sake of waterproof, screw torque should be over 0.4 N•m to
0.5 N•m.
CF card slot
This slot is used for the optional SNCA-CFW5* Wireless Card or CF
Memory Card**.
Note
Insert the CF memory card** with its bottom side facing the camera's
control panel.
* SNCA-CFW5 is not available in some countries and areas. For details,
contact your authorized Sony dealer.
** For inquiries regarding verified CF memory cards, contact your
authorized Sony dealer.
CF card lever
Press the lever to remove the CF memory card** from the CF card slot.
Control panel cover
Loosen the retaining screw with the supplied wrench and open the cover
in the direction shown by the arrow.
Camera head fixing screw
First loosen the screw with the supplied wrench and face the camera
head to the desired direction, then tighten the screw to fix it.
POWER indicator (Green)
When the power is supplied to the camera, the camera starts checking
the system. If the system is normal, this indicator lights up.
NETWORK indicator (Green/Orange)
The indicator lights up or flashes when the camera is connected to the
network. The indicator is off when the camera is not connected to the
network. When 100BASE-TX is connected, the indicator turns green.
When 10BASE-T is connected, the indicator turns orange.
NTSC/PAL indicator (Green/Orange)
The green indicator lights up when the output mode is NTSC.
The orange indicator lights up when the output mode is PAL.
Heater indicator (Green)
When the power is supplied by AC 24 V or DC 12 V, if the heater in the
camera is working normally , the indicator lights up in green.
When the power is supplied by PoE, the heater will not work. However,
the heater indicator may light up.
NTSC/PAL button
Switching the video output.
MONITOR output jack
Connect this jack to a video input connector of a video monitor. You
can adjust the camera or lens while looking at the image on the video
monitor. After adjusting the camera or lens, disconnect the cable.
Close the cover firmly to keep the camera waterproof.
Note
Use the plug that is 11.8 mm or smaller in diameter.
Zoom buttons
Use the two buttons to adjust lens' zoom.
[W] WIDE: Zoom out
[T] TELE: Zoom in
Focus buttons
Use the two buttons to adjust lens' focus.
[N] NEAR: Focus on a nearby subject
[F] FAR: Focus on a distant subject
To reset the camera to its factory default settings, hold down these two
buttons together and supply power to camera.
Easy Focus button
Press this button to automatically adjust the focus easily.
(continued on the reverse side)
Advertisement
Related Manuals for Sony Ipela SNC-CH280
Summary of Contents for Sony Ipela SNC-CH280
- Page 1 LAN authorized Sony dealer. Insert the CD-ROM in your CD-ROM drive. specifications, SONY shall not be liable for any damage, loss of recorded data CF card lever A cover page appears automatically in your Web browser.
- Page 2 It may appear flawless, but the components may have deteriorated over equipment. time, which may cause a malfunction or accident. For details, please consult the store of purchase or an authorized Sony dealer. Connecting the I/O Cable Connect the wires of the I/O cable as follows:...