Table of Contents
Advertisement
28
en | Controlling System4 Video Multiplexers
4.2
Programming/Controlling MUX Functions
4.2.1
Password Entry
If a password is required by the multiplexer on-screen display, you must press ENTER after
each number entered for the password (e.g. if the password is 1-2-3-4, you then press 1, then
ENTER, 2, then ENTER, etc.).
Figure 4.2 System4 MUX Main Control Menu
4.2.2
MUX Main Control Menu Command Descriptions
The MUX Main Control menu, displayed on the softkey display, uses the softkey buttons to
execute commands or to gain access to other submenus for additional programming/
configuration. Detailed command descriptions follow. Refer to the Multiplexer Instruction Book
for additional information.
Exit
Exits one menu and returns to the main menu for the particular function being programmed.
Full Screen
Select Full Screen Camera Mode by pressing the Full Screen softkey. The camera currently
selected by the keyboard will be displayed in full screen on the monitor.
Quad Screen
Divides the screen into four separate areas. Enable Quad Screen Mode by pressing the Quad
Screen key once. Pressing the key additional times cycles through different viewing
configurations.
Multi Screen
Enables multiscreen displays. The capabilities of the multiplexer model under control
determine the available configurations.
–
–
–
NOTICE! Pressing the multiscreen softkey multiple times cycles through the possible
i
selections.
F.01U.127.291 | 1.93 | 2009.03
Exit
Record
Full
Play
Screen
Quad
ZOOM
Screen
Multi
Freeze
Screen
Select
Recorder
Cameo
Controls
Segment
Camera
Sequence
Control
Toggle
MUX
VCR
Control
Text Mode
6-channel: 5+1
9-channel: 4+3, 3x3
16-channel: 4+3, 8+2, 12+1, 3x3, and 4x4
User Manual
IntuiKey Keyboard
Bosch Security System, Inc.
Hide quick links:
Advertisement
Table of Contents
