IBM 436854u - System x3200 M2 5U Mini Tower Server User Manual page 64
User manual
Hide thumbs
Also See for 436854u - System x3200 M2 5U Mini Tower Server:
- Brochure & specs (2 pages) ,
- Product manual (15 pages) ,
- Problem determination and service manual (266 pages)
Table of Contents
Advertisement
To replace a hot-swap power supply, complete the following steps:
1. Review the safety information that begins on page v and "Installation guidelines"
2. Disconnect the power cord from the power supply that is to be removed.
3. Press down on the orange release lever and pull the power supply out of the
4. If you are instructed to return the hot-swap power supply, follow all packaging
5. Touch the static-protective package that contains the hot-swap power supply to
6. Place the power supply into the bay guides.
7. Press down on the orange release lever and push the power supply toward the
8. Connect one end of the power cord into the connector on the back of the power
9. Make sure that both the ac and dc power LEDs on the rear of the power supply
Go to "Completing the installation" on page 52 for information on completing the
installation.
50
System x3200 M2 Types 4367 and 4368: User's Guide
on page 20.
bay, using the handle.
Release lever
Hot-swap power
supply
instructions, and use any packaging materials for shipping that are supplied to
you.
any unpainted metal surface on the server; then, remove the power supply from
the package and place it on a static-protective surface.
front of the chassis until it locks into place.
supply and connect the other end of the power cord into a properly grounded
electrical outlet.
are lit, indicating that the power supply is operating correctly.
Hide quick links:
Advertisement
Table of Contents
