REMOVING & REPLACING THE LIFT-OFF OVEN DOOR
LOWER OVEN
To remove the door:
Step. 1
Fully open the door.
Step. 2
Pull the hinge locks up
toward the door frame to
the unlocked position.
Step. 3
Firmly grasp both sides of the door at the top.
Step. 4
Close door to the door removal
position, which is approximately
5 degrees.
Step. 5
Lift door up and out until the
hinge arm is clear of the slot.
DOOR CARE INSTRUCTIONS
• Most oven doors contain glass that can break.
Read the following recommendations:
1. Do not close the oven door until all the oven racks
are fully in place.
Lock
Unlock
Slot
Lock
Unlock
Hinge
Slot
lock
Lock
Hinge
Lock
Unlock
Slot
lock
Unlock
Slot
Hinge
Hinge
lock
lock
about 5°
M A I N T E N A N C E
To replace the door:
Step. 1
Firmly grasp both sides of the door at the top.
Hinge arm
Step. 2
With the door at
Hinge arm
the same angle as
the removal
position, seat the
Hinge arm
indentation of the
Hinge arm
hinge arm into the
bottom edge of the
hinge slot. The
notch in the hinge
arm must be fully
seated into the
bottom edge of the
slot.
Step. 3
Open the door fully. If the door will not open fully, the
indentation is not seated correctly in the bottom edge
of the slot.
Step. 4
Push the hinge locks down
against the front frame of
the oven cavity to the locked
position.
Step. 5
Close the oven door.
2. Do not hit the glass with pots, pans, or any other
object.
3. Scratching, hitting, jarring, or stressing the glass
may weaken its structure causing an increased risk
of breakage at a later time.
(cont')
Bottom
edge of
slot
Bottom
Indentation
edge of
slot
Indentation
Bottom
Bottom
edge of
edge of
slot
slot
Indentation
Indentation
Hinge arm
Hinge lock
Hinge arm
Hinge lock
Hinge arm
Hinge arm
Hinge lock
Hinge lock
41