Table of Contents
Advertisement
Notes:
• Pressing a button other than the [g] and [h] but-
tons provides freeze cancellation.
• When the zoom in and out functions are assigned to
the [e] and [f] buttons respectively, the image
can be scaled up and down in the image freezing
state.
Refer to page 25 for function assignment to buttons.
Holding down this button (for more than 2 seconds):
Displays the SETUP menu.
i Selection button [SEL]
Pressing this button while the SETUP menu is displayed
determines the setting.
Pressing this button except while the SETUP menu is
displayed calls up the SEL menu. (
o Up/down/left/right buttons
Up button [g]: This button moves the cursor upward to
change a setting item while the SETUP menu is dis-
played.
Down button [h]: This button moves the cursor down-
ward to change a setting item while the SETUP
menu is displayed.
Left button [e]: This button moves the cursor leftward
or selects a setting while the SETUP menu is dis-
played.
This button moves the cursor in the minus direc-
tion on the level adjustment scale or selects a set-
ting item while the SEL menu is displayed.
When the zoom out function is assigned to the left
button, the image can be scaled down (
25).
Right button [f]: This button moves the cursor right-
ward or selects a setting while the SETUP menu is
displayed.
This button moves the cursor in the plus direction
on the level adjustment scale or selects a setting
item while the SEL menu is displayed.
When the zoom in function is assigned to the right
button, the image can be scaled up (up to 2.5-fold)
(
page 25).
!0 Color bar display/AWC button [BAR/AWC]
Pressing this button: Calls up the color bar on the
screen while an image is displayed. The color bar
becomes a blue back display while the SETUP
menu is displayed.
Holding down this button (for more than 2 seconds):
Starts up AWC while an image is displayed if
"WHITE BAL" in the SETUP menu is set to "AWC".
10
!1 Dynamic range button [D RANGE]
!2 Camera cable connector
page 25)
page
Important:
• When the camera head is not connected, pressing
the [BAR/AWC] button does not activate any opera-
tion.
This button toggles the dynamic range between NOR-
MAL and EXPAND. The button lights green when
"EXPAND" is selected.
"EXPAND" shall be selected when dark portions are
less viewable because too bright portions are present
in a screen. (
page 21)
Note: The dynamic range can also be set in the scene
file. (
page 20)
This connector is used to connect the camera cable
(option).
- Quick Links:
- Operating Instructions
- Camera Head
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
