Camera Parts Accessory An AC adapter (part number B867062) is available. Front/top view To order the adapter, contact your dealer or call Epson at (800) 873-7766 or visit the Epson Store Manual mode www.epsonstore.com (U.S. sales only). In Canada, Mode dial Continuous please call (800) 463-7766 for dealer referral.
LCD monitor POWER button Installing the Battery The Epson PhotoPC L-410 accepts the CR-V3 battery included with the camera as well as AA alkaline, NiCad, or NiMH batteries, including rechargeables. Follow these steps to install the batteries: 1. Turn the camera upside down.
Epson PhotoPC L-410 Before you start, make sure the batteries are installed and the Using Memory Cards camera is turned on as described on page 2. 1. Turn the Mode dial to Automatic. You can take pictures and save them in the camera without a memory card.
Epson PhotoPC L-410 3. Make sure you are at least 20 inches (50 cm) away from Settings and Icons your subject. Self-timer (2 seconds), (10 seconds) ❏ To zoom in on your subject, press the T (telephoto) button. Focus frame Place your subject within the focus frame.
Before you start, make sure your printer is set up and has ink 8. Press and hold the shutter button halfway. The focus frame installed. Load 4 × 6 inch Epson Premium Glossy Paper, turns green and the focus is set.
Epson PhotoPC L-410 3. Open the connector cover on the side of the camera and 4. If you want to print more than one copy of each picture, plug the small end of the cable into the camera’s USB port press the OK button and use the u button to select the as shown.