Table of Contents
Advertisement
3 – Preparations
Connecting monitoring equipment
To monitor with headphones, connect them to the
/
jack.
LINE OUT
To monitor with an external monitoring system
(powered monitor speakers or an amplifier and
speakers), connect it to the /
Headphones
38
TASCAM DR-08
jack.
LINE OUT
Powered monitor speakers or
amplifier and speakers
Preventing accidental operation
with the hold function
To prevent accidental operation, set the
switch to
HOLD
HOLD
function. When hold is activated, all keys are
disabled.
Using the built-in microphone
This unit's built-in microphones can be adjusted,
allowing the angles of the microphones to be
changed. By changing the position of the built-
in stereo microphone according to recording
conditions, the unit can be set to record in wide
/
to activate the hold
Advertisement
Table of Contents
