Advertisement
Quick Links
Updates
Always use the most recent firmware for this device.
Please visit the TASCAM web site at http://www.tascam.
com to check for the latest firmware.
Maintenance items
V1.01 Fixes
•
If you pressed and held the
search backward or forward at the very beginning or
end of a song, the speed would return to normal. This
issue has been fixed.
•
If the
item on the
AREA
set to
, and you set IN (starting) or OUT
PLAYLIST
(ending) points and then made a move in the playlist
or otherwise edited it, the IN and OUT points would not
be saved correctly. This issue has been fixed.
•
If the
item on the
AREA
, and you select a file not added on the
PLAYLIST
screen and then use the LOOP button to
PLAYLIST
try to set an IN (starting) or OUT (ending) point, the
following pop-up message will now appear.
File not in PLAYLIST
Confirmation of firmware version
Confirm the firmware version of your GB-10 before
conducting a firmware update.
1 Turn the unit's power ON.
2 Press the MENU key to open the
3 Use the §/BROWS or ¶/
menu item (highlight the item),
INFORMATION
and press the Á or ¯ button to open the
screen.
INFORMATION
4 Use the §/BROWS or ¶/
page and confirm the
SYSTEM (3/3)
(firmware version) is displayed.
Ver.
You do not need to update the unit's firmware if
the version shown is the same as or newer than the
version that you intend to use for the update.
Firmware update procedures
NOTE
When you updated the firmware, make sure that the
batteries have enough remaining power or use an optional
AC adaptor (PS-P520). The program has been set so that the
update will not be conducted if battery power is insufficient.
1 Download the most recent firmware from the
TASCAM web site (http://www.tascam.com).
D01141400A
Ô or button to
screen was
PLAY MODE
screen is set to
PLAY MODE
screen.
MENU
button to select
button to open the
System
GB-10
Release Notes
2 Turn the unit's power ON and use the included
USB cable to connect it with a computer. This unit
will be recognized as an external drive (external
storage device) by the computer.
3 Copy the downloaded firmware to the UTILITY
folder on the GB-10.
4 After copying has completed, disconnect the
unit from the computer following the correct
procedures, remove the USB cable and turn the
unit power OFF.
5 While pressing and holding both the Ô and Á
buttons, turn the unit power ON.
The unit starts up in update mode, and the update file
appears on the screen.
NOTE
•
If this screen does not appear, turn the power OFF. Then
while pressing and holding both the Ô and Á buttons,
turn the unit's power ON again. Continue to press and
hold the Ô and Á buttons firmly until this screen
appears.
•
When firmware has been copied to this unit's UTILITY
folder from a Mac, in addition to the firmware file itself,
another file with "._" added to the beginning of the
firmware name is also shown. Use the file without the "._"
at the beginning of the name.
This screen shows a list of the firmware update files inside
•
the UTILITY folder of the unit. Also, the screen shows the
firmware copied at Step 3 above. "No Update File" appears
if there is no update file in the UTILITY folder.
The screen shown is an example. The actual display differs.
•
6 Select the firmware (highlight the item) then press
Á button.
The following screen appears.
The current version appears on the left and the
updated version appears on the right.
NOTE
The screen shown is an example. The actual display differs.
7 Press the Á button to start the update.
8 When the update is complete,
appears at the bottom of the screen and the power
turns OFF automatically. Turn the power ON again.
Update Complete
1
TASCAM GB-10
Advertisement
Related Manuals for Tascam GB-10
Summary of Contents for Tascam GB-10
- Page 1 Confirmation of firmware version another file with “._” added to the beginning of the firmware name is also shown. Use the file without the “._” Confirm the firmware version of your GB-10 before at the beginning of the name. conducting a firmware update.
- Page 2 System is now the most recent version of the Vers. firmware. This completes the procedure for updating this unit. 10 Connect to a computer with USB and delete the firmware update from the unit’s UTILITY folder. TASCAM GB-10...