hit counter script
Asus M5A99X EVO User Manual
  1. Manuals
  2. Brands
  3. Asus Manuals
  4. Motherboard
  5. M5A99X EVO
  6. User manual

Asus M5A99X EVO User Manual

Amd 990x/sb950 chipset
Hide thumbs Also See for M5A99X EVO:
Table of Contents

Advertisement

Quick Links

See also: User Manual
M5A99X
EVO

Advertisement

Table of Contents
loading

Related Manuals for Asus M5A99X EVO

Summary of Contents for Asus M5A99X EVO

  • Page 1 M5A99X...
  • Page 2 Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

  • Page 3: Table Of Contents

    Product highlights................ 1-2 1.3.2 Dual Intelligent Processors 2 with DIGI+ VRM ......1-3 1.3.3 ASUS Exclusive Features ............1-3 1.3.4 ASUS Quiet Thermal Solution ............. 1-4 1.3.5 ASUS EZ DIY ................1-4 1.3.6 Other special features ..............1-5 Chapter 2: Hardware information Before you proceed ...................

  • Page 4: Contents

    Exit menu ....................3-29 3.10 Updating BIOS ..................3-30 3.10.1 ASUS Update utility..............3-30 3.10.2 ASUS EZ Flash 2 utility ............. 3-33 3.10.3 ASUS BIOS Updater ..............3-35 Chapter 4: Software support Installing an operating system ..............4-1 Support DVD information ................4-1 4.2.1...
  • Page 5 Contents 4.3.2 DIGI+ VRM .................. 4-4 4.3.3 TurboV EVO ................4-5 4.3.4 EPU ..................... 4-9 4.3.5 FAN Xpert.................. 4-10 4.3.6 Probe II..................4-11 4.3.7 Sensor Recorder ............... 4-12 4.3.8 Ai Charger+ ................4-13 4.3.9 Monitor ..................4-14 4.3.10 System Information ..............4-15 4.3.11 Audio configurations..............

  • Page 6: Notices

    Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://green.asus.com/english/REACH.htm. DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling.

  • Page 7: Safety Information

    Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.

  • Page 8: About This Guide

    Where to find more information Refer to the following sources for additional information and for product and software updates. ASUS websites The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information. Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer.

  • Page 9: Conventions Used In This Guide

    Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task.

  • Page 10: M5A99X Evo Specifications Summary

    ® recognize less than 3GB. Hence, a total installed memory of less than 3GB is recommended. *** Refer to www.asus.com or this user manual for the Memory QVL (Qualified Vendors Lists) Expansion slots 2 x PCI Express 2.0 x16 slots (single �� x16 speed, dual �� x8/x8 (single ��...
  • Page 11 - Front Panel USB 3.0 Support - MemOK! - AI Suite II - AI Charger+ - ASUS UEFI BIOS EZ Mode featuring friendly graphics user interface ASUS Quiet Thermal Solution - ASUS Fanless Design: Heat pipe solution - ASUS Fan Xpert...
  • Page 12 1 x TPU switch BIOS features 32 Mb Flash ROM, UEFI BIOS, PnP, DMI 2.0, WfM2.0, SM BIOS 2.6, ACPI 2.0a, Multi-language BIOS, ASUS EZ Flash 2, Manageability WfM 2.0, DMI 2.0, WOL by PME, WOR by PME, PXE Support DVD contents...

  • Page 13: Chapter 1: Product Introduction

    ® The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below.

  • Page 14: Special Features

    PCI Express 2.0 interface. Complete USB 3.0 Integration ASUS facilitates strategic USB 3.0 accessibility for both the front and rear panel – 4 USB 3.0 ports in total. Experience the latest plug & play connectivity at speeds up to 10 times faster than USB 2.0.

  • Page 15: Dual Intelligent Processors 2 With Digi+ Vrm

    Unleash your performance with ASUS’ simple onboard switch or AI Suite II utility. The TPU chip offers precise voltage control and advanced monitoring through Auto Tuning and TurboV functions.

  • Page 16: Asus Quiet Thermal Solution

    ASUS Fan Xpert ASUS Fan Xpert intelligently allows you to adjust both the CPU and chassis fan speeds according to different ambient temperatures caused by different climate conditions in different geographic regions and your PC’s loading. The built-in variety of useful profiles offer flexible controls of fan speed to achieve a quiet and cool environment.

  • Page 17: Other Special Features

    ASUS EZ-Flash 2 ASUS EZ Flash 2 is a user-friendly utility that allows you to update the BIOS without using a bootable floppy disk or an OS-based utility. 1.3.6...
  • Page 18 Chapter 1: Product Introduction...

  • Page 19: Chapter 2: Hardware Information

    Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. ASUS M5A99X EVO...

  • Page 20: Motherboard Overview

    Motherboard overview 2.2.1 Motherboard layout Refer to 2.2.8 Internal connectors and 2.3.10 Rear panel connection for more information about rear panel connectors and internal connectors. Chapter 2: Hardware information...

  • Page 21: Layout Contents

    USB 2.0 connectors (10-1 pin USB910, USB1112, USB1314) 2-24 EPU switch 2-18 TPU switch 2-17 IEEE 1394a port connector (10-1 pin IE1394_2) 2-25 Front panel audio connector (10-1 pin AAFP) 2-27 2-25 Digital audio connector (4-1 pin SPDIF_OUT) ASUS M5A99X EVO...

  • Page 22: Central Processing Unit (Cpu)

    2.2.2 Central Processing Unit (CPU) ® The motherboard comes with an AM3+/AM3 socket designed for AMD FX™-Series / Phenom™ II / Athlon™ II / Sempron™ 100 Series Processors. Ensure that all power cables are unplugged before installing the CPU. The AM3+ socket has a different pinout from the 940-pin socket designed for the AMD Opteron processor.

  • Page 23: System Memory

    The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) slots. A DDR3 module is notched differently from a DDR or DDR2 module. DO NOT install a DDR or DDR2 memory module to the DDR3 slot. Recommended memory configurations ASUS M5A99X EVO...

  • Page 24: Memory Configurations

    • Due to the CPU spec., AMD AM3 100 series CPUs support up to DDR3 1066MHz. With ASUS design, this motherboard can support up to DDR3 1333MHz. • When overclocking, some AMD CPU models may not support DDR3 1600 or higher frequency DIMMs.
  • Page 25 DS - 1.65 • Patriot PX7312G2000ELK(XMP) 12GB ( 3x 4GB ) DS - 9-11-9-27 1.65 • Team TXD32048M2000C9(XMP) DS Team T3D1288RT-20 9-9-9-24 • Team TXD32048M2000C9-L(XMP) DS Team T3D1288LT-20 9-9-9-24 • Team TXD32048M2000C9-L(XMP) DS Team T3D1288RT-20 9-9-9-24 • • ASUS M5A99X EVO...
  • Page 26 M5A99X EVO Motherboard Qualified Vendors Lists (QVL) DDR3 1866 MHz capability for AMD AM3 CPU DIMM socket support Chip (Optional) Vendor Part No. Size Brand Chip NO. Timing Voltage 1 DIMM 2 DIMM 4 DIMM CORSAIR CMZ8GX3M2A1866C9(XMP) 8GB ( 2x 4GB ) DS - 9-10-9-27 1.5 •...
  • Page 27 8-8-8-24 1.65 • Patriot PX538G1600LLK(XMP) 8GB ( 2x 4GB ) DS - 8-9-8-24 1.65 • • • Team TXD31024M1600C8-D(XMP) SS Team T3D1288RT-16 8-8-8-24 1.65 • • • Team TXD32048M1600HC8-D(XMP) DS Team T3D1288RT-16 8-8-8-24 1.65 • • • ASUS M5A99X EVO...
  • Page 28 M5A99X EVO Motherboard Qualified Vendors Lists (QVL) DDR3 1333 MHz capability for AMD AM3 CPU DIMM socket support (Optional) Vendor Part No. Size DS Chip Brand Chip NO. Timing Voltage DIMM DIMM DIMM Apacer 78.01GC6.9L0 SS Apacer AM5D5808DEJSBG • • •...
  • Page 29 SS Team T3D1288LT-13 7-7-7-21 1.75 • • • Team TXD31048M1333C7-D(XMP) 1GB SS Team T3D1288LT-13 7-7-7-21 1.75 • Team TXD32048M1333C7-D(XMP) 2GB DS Team T3D1288LT-13 7-7-7-21 1.5-1.6 • • Team TXD32048M1333C7-D(XMP) 2GB DS Team T3D1288LT-13 7-7-7-21 1.5-1.6 • • ASUS M5A99X EVO 2-11...

  • Page 30: Channel Memory Configuration

    2 DIMMs: Supports two (2) modules inserted into either the black slots as one pair of Dual-channel memory configuration. • 4 DIMMs: Supports four (4) modules inserted into the black slots as two pairs of Dual- channel memory configuration. Visit the ASUS website for the latest QVL. 2-12 Chapter 2: Hardware information...

  • Page 31: Expansion Slots

    PCIe 2.0 x16_3 slot [black] (at x4 mode, compatible with PCIe x1 and x4 devices) PCI Express operating mode VGA configuration PCIe 2.0 x16_1 PCIe 2.0 x16_2 Single VGA/PCIe card (Recommend for single VGA) Dual VGA/PCIe card ASUS M5A99X EVO 2-13...

  • Page 32: Irq Assignments For This Motherboard

    • In single VGA card mode, use the PCIe 2.0 x16_1 slot (navy blue) for a PCI Express x16 graphics card to get better performance. • In CrossFireX™ or SLI™ mode, use the PCIe 2.0 x16_1 and PCIe 2.0 x16_2 slots for PCI Express x16 graphics cards to get better performance.

  • Page 33: Jumper

    • Due to the chipset behavior, AC power off is required to enable C.P.R. function. You must turn off and on the power supply or unplug and plug the power cord before rebooting the system. ASUS M5A99X EVO 2-15...

  • Page 34: Onboard Switches

    BIOS default settings. A messgae will appear during POST reminding you that the BIOS has been restored to its default settings. • We recommend that you download and update to the latest BIOS version from the ASUS website at www.asus.com after using the MemOK! function. 2-16 Chapter 2: Hardware information...
  • Page 35 You may use the TurboV and Auto Tuning feature in the TurboV EVO application, adjust the BIOS setup program, or enable the TPU switch at the same time. However, the system will use the last setting you have made. ASUS M5A99X EVO 2-17...
  • Page 36 EPU switch Turning this switch to Enable will automatically detect the current PC loadings and intelligently moderate the power consumption. For ensuring the system performance, turn the switch setting to Enable when the system is powered off. • The EPU LED (O2LED3) near the EPU switch lights when the switch setting is turned to Enable.

  • Page 37: Onboard Leds

    POST (Power-on Self Test). If an error is found , the LED next to the error device will continue lighting until the problem is solved. This user-friendly design provides an intuitional way to locate the root problem within a second. ASUS M5A99X EVO 2-19...
  • Page 38 TPU LED The TPU LED lights when the TPU switch is turned to Enable. EPU LED The EPU LED lights when the EPU switch is turned to Enable. 2-20 Chapter 2: Hardware information...

  • Page 39: Internal Connectors

    You must install Windows XP Service Pack 3 or later versions before using Serial ATA hard disk drives. The Serial ATA RAID feature is available only if you are using ® Windows XP SP3 or later versions. ASUS M5A99X EVO 2-21...
  • Page 40 JMicron JMB362 Serial ATA 3.0 Gb/s connectors (7-pin SATA3G_E1/E2 [black]) ® These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical disc drives via Serial ATA 3.0 Gb/s signal cables. • These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode].
  • Page 41 480 MBps connection speed. If the USB 3.0 front panel cable is available from your system chassis, with this USB 3.0 connector, you can have a front panel USB 3.0 solution. ASUS M5A99X EVO 2-23...
  • Page 42 Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! You can connect the front panel USB cable to the ASUS Q-Connector (USB, blue) first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports.
  • Page 43 This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s). Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis. The S/PDIF module is purchased separately. ASUS M5A99X EVO 2-25...
  • Page 44 The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power. • Only the CPU_FAN, CHA_FAN1, CHA_FAN2 and CHA_FAN3 connectors support the ASUS FAN Xpert feature. • If you install two VGA cards, we recommend that you plug the rear chassis fan cable to the motherboard connector labeled CHA_FAN1, CHA_FAN2 or CHA_FAN3 for better thermal environment.
  • Page 45 This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. The COM module is purchased separately. ASUS M5A99X EVO 2-27...
  • Page 46 If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support. asus.com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details. • If you want to use two high-end PCI Express x16 cards, use a PSU with 1000W power or above to ensure the system stability.

  • Page 47: System Panel Connector

    Pressing the power switch for more than four seconds while the system is ON turns the system OFF. • Reset button (2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. ASUS M5A99X EVO 2-29...

  • Page 48: Building Your Computer System

    Building your computer system 2.3.1 Additional tools and components to build a PC system 1 bag of screws Philips (cross) screwdriver PC chassis Power supply unit AMD AM3+ CPU AMD AM3+ compatible CPU Fan DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card (optional) The tools and components in the table above are not included in the motherboard package.

  • Page 49: Cpu Installation

    CPU designed for the AM3+ socket. The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU! ASUS M5A99X EVO 2-31...

  • Page 50: Cpu Heatsink And Fan Assembly Installation

    2.3.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary. 2-32 Chapter 2: Hardware information...
  • Page 51 To install the CPU heatsink and fan assembly ASUS M5A99X EVO 2-33...
  • Page 52 2-34 Chapter 2: Hardware information...

  • Page 53: Dimm Installation

    2.3.4 DIMM installation To remove a DIMM ASUS M5A99X EVO 2-35...

  • Page 54: Motherboard Installation

    2.3.5 Motherboard installation The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps remain the same. 2-36 Chapter 2: Hardware information...
  • Page 55 DO NOT overtighten the screws! Doing so can damage the motherboard. ASUS M5A99X EVO 2-37...

  • Page 56: Atx Power Connection

    2.3.6 ATX Power connection 2-38 Chapter 2: Hardware information...

  • Page 57: Sata Device Connection

    2.3.7 SATA device connection ASUS M5A99X EVO 2-39...

  • Page 58: Front I/O Connector

    2.3.8 Front I/O Connector To install ASUS Q-Connector To install USB 2.0 Connector To install front panel audio connector AAFP USB 2.0 To install USB 3.0 Connector USB 3.0 2-40 Chapter 2: Hardware information...

  • Page 59: Expension Card Installation

    2.3.9 Expension Card installation To install PCIe x16 cards To install PCIe x1 cards To install PCI cards ASUS M5A99X EVO 2-41...

  • Page 60: Rear Panel Connection

    2.3.10 Rear panel connection Rear panel connectors 1. PS/2 keyboard/mouse combo port 7. Optical S/PDIF Out port 2. USB 2.0 ports 3 and 4 8. Power External SATA port 3. USB 2.0 ports 5 and 6 9. IEEE 1394a port 4.
  • Page 61 Front Speaker Out Front Speaker Out Pink Mic In Mic In Mic In Mic In Orange – – Center/Subwoofer Center/Subwoofer Black – Rear Speaker Out Rear Speaker Out Rear Speaker Out Gray – – – Side Speaker Out ASUS M5A99X EVO 2-43...

  • Page 62: Audio I/O Connections

    2.3.11 Audio I/O connections Audio I/O ports Connect to Headphone and Mic Connect to Stereo Speakers Connect to 2.1 channel Speakers 2-44 Chapter 2: Hardware information...
  • Page 63 Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers Connect to 7.1 channel Speakers When the DTS Surround Sensation UltraPC function is enabled, ensure to connect the rear speaker to the gray port. ASUS M5A99X EVO 2-45...

  • Page 64: Starting Up For The First Time

    Starting up for the first time After making all the connections, replace the system case cover. Be sure that all switches are off. Connect the power cord to the power connector at the back of the system chassis. Connect the power cord to a power outlet that is equipped with a surge protector. Turn on the devices in the following order: Monitor External SCSI devices (starting with the last device on the chain)

  • Page 65: Chapter 3: Bios Setup

    BIOS setup Knowing BIOS The new ASUS UEFI BIOS is an Unified Extensible Firmware Interface, offering a user- friendly interface that goes beyond traditional keyboard-only BIOS controls to enable more flexible and convenient mouse input. Users can easily navigate the new UEFI BIOS with the same smoothness as their operating system.

  • Page 66: Ez Mode

    Default(F5) Loads optimized default Selects the boot device priority Power Saving mode Normal mode ASUS Optimal mode Displays the system properties of the selected mode on the right hand side Selects the boot device priority • The boot device options vary depending on the devices you installed to the system.

  • Page 67: Advanced Mode

    The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following sections for the detailed configurations. To access the EZ Mode, click Exit, then select ASUS EZ Mode. Back button Menu items...

  • Page 68: Menu Items

    Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. The other items (Ai Tweaker, Advanced, Monitor, Boot, Tool, and Exit) on the menu bar have their respective menu items.

  • Page 69: Main Menu

    RAM to clear the BIOS password. See section 2.2.5 Jumper for information on how to erase the RTC RAM. The Administrator or User Password items on top of the screen show the default • Not Installed. After you set a password, these items show Installed. ASUS M5A99X EVO...

  • Page 70: Administrator Password

    Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected fields in the BIOS setup program. To set an administrator password: Select the Administrator Password item and press <Enter>.

  • Page 71: Ai Tweaker Menu

    1.100V Auto CPU VDDA Voltage 2.500V Auto DRAM Voltage 1.550V Auto NB Voltage 1.100V Auto NB HT Voltage 1.200V Auto NB 1.8V Voltage 1.800V Auto SB Voltage 1.800V Auto Version 2.00.1201. Copyright (C) 2010 American Megatrends, Inc. ASUS M5A99X EVO...
  • Page 72 Ai Overclock Tuner [Auto] Allows you to select the CPU overclocking options to achieve the desired CPU internal frequency. Select any of these preset overclocking configuration options: [Auto] Loads the optimal settings for the system. [Manual] Allows you to individually set overclocking parameters. [D.O.C.P.] CPU Bus, CPU ratio and memory parameters will be auto optimized.

  • Page 73: Dram Timing Control

    Configuration options: [Auto] [2 CLK] – [10 CLK] DRAM READ to READ Timing [Auto] Configuration options: [Auto] [2 CLK] – [10 CLK] DRAM Refresh Rate [Auto] Configuration options: [Auto] [Every 7.8ms] [Every 3.9ms] DRAM Command Rate [Auto] Configuration options: [Auto] [1T] [2T] ASUS M5A99X EVO...
  • Page 74 DRAM Driving Control DCT0 Information: CKE drive strength [Auto] Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x] CS/ODT drive strength [Auto] Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x] ADDR/CMD drive strength [Auto] Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x] MEMCLK drive strength [Auto] Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x] Data drive strength [Auto] Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]...
  • Page 75 Reducing phase number under light system loading to increase VRM efficiency [Standard] Proceeds phase control depending on the CPU loading. [Optimized] Loads the ASUS optimized phase tuning profile. [Extreme] Proceeds the full phase mode. [Manual Adjustment] Allows manual adjustment.
  • Page 76 VRM Spread Spectrum [Disabled] This item allows you to enable the spread spectrum to enhance system stability. Configuration options: [Disabled] [Enabled] CPU Power Duty Control [T.Probe] [T.Probe] Maintains the VRM thermal balance. [Extreme] Maintains the VRM current balance. CPU & NB Voltage [Offset Mode] [Manual Mode] Allows you to set a fixed CPU &...

  • Page 77: Advanced Menu

    > APM →←: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F5: Optimized Defaults F10: Save ESC: Exit F12: Print Screen Version 2.00.1201. Copyright (C) 2010 American Megatrends, Inc. ASUS M5A99X EVO 3-13...

  • Page 78: Cpu Configuration

    3.5.1 CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. The items shown in this screen may be different due to the CPU you installed. UEFI BIOS Utility - Advanced Mode Exit Main Ai Tweaker Advanced Monitor...

  • Page 79: North Bridge Configuration

    Memory Hole Remapping [Enabled] Configuration options: [Disabled] [Enabled] DCT Unganged Mode [Enabled] Configuration options: [Disabled] [Enabled] Initiate Graphic Adapter [PEG/PCI] Allows you to decide which graphics controller to use as the primary boot device. Configuration options: [PCI/PEG] [PEG/PCI] ASUS M5A99X EVO 3-15...

  • Page 80: Sata Configuration

    3.5.3 SATA Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Not Present if no SATA device is installed to the corresponding SATA port. UEFI BIOS Utility - Advanced Mode Exit Main Ai Tweaker Advanced...
  • Page 81 SATA Hot Plug on PORT3 [Disabled] Configuration options: [Enabled] [Disabled] SATA Hot Plug on PORT4 [Disabled] Configuration options: [Enabled] [Disabled] SATA Hot Plug on PORT5 [Disabled] Configuration options: [Enabled] [Disabled] SATA Hot Plug on PORT6 [Disabled] Configuration options: [Enabled] [Disabled] ASUS M5A99X EVO 3-17...

  • Page 82: Usb Configuration

    3.5.4 USB Configuration The items in this menu allow you to change the USB-related features. UEFI BIOS Utility - Advanced Mode Exit Ai Tweaker Main Advanced Monitor Boot Tool Back Advanced\ USB Configuration > USB Configuration Enables Legacy USB support. AUTO option disables legacy support if no USB Devices: USB devices are connected.

  • Page 83: Cpu Core On/Off Function

    Auto System might become unstable due to different CPU margins. ASUS Core Unlocker [Disabled] [Enabled] Enables the ASUS Core Unlocker to get the full computing power of the processor. [Disabled] Disables this function. CPU Core Activation [Auto] This item lets user turn off core except core 1, user can turn off 2nd, 3rd, 4th, 5th, etc core manually.
  • Page 84 JMB Storage Controller [Enabled] Allows you to enable or disable the JMB storage controller. Configuration options: [Disabled] [Enabled] If you want to use the full functin of the JMB storage contorller (ex. AHCI), we recommend that you set this item to [Enabled] and install the JMicron JMB36X Controller Driver from the motherboard support DVD.

  • Page 85: Apm

    Allows BIOS to switch off some power at S5 state to get system ready for the ErP requirement. When set to [Enabled], power for WOL, WO_USB, audio and onboard LEDs will be switched off at S5 state. ASUS M5A99X EVO 3-21...

  • Page 86: Monitor Menu

    Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. UEFI BIOS Utility - Advanced Mode Exit Main Ai Tweaker Advanced Monitor Boot Tool CPU Temperature +69ºC / +181ºF +69ºC / +181ºF MB Temperature +35ºC / +120ºF VCORE Voltage...
  • Page 87 CPU fan warning speed. Configuration options: [Ignore] [100RPM] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM] Chassis Q-Fan Control [Disabled] [Disabled] Disables the Chassis Q-Fan control feature. [Enabled] Enables the Chassis Q-Fan control feature. ASUS M5A99X EVO 3-23...

  • Page 88: Boot Menu

    [Disabled] Disables the full screen logo display feature. Set this item to [Enabled] to use the ASUS MyLogo 2™ feature. Wait for ‘F1’ If Error [Enabled] When set to [Enabled], the system waits for the F1 key to be pressed when error occurs.

  • Page 89: Boot Option Priorities

    • To select the boot device during system startup, press <F8> when ASUS Logo appears. • To access Windows OS in Safe Mode, do any of the following: - Press <F8>...

  • Page 90: Tools Menu

    > ASUS O.C. Profile 3.8.1 ASUS EZ Flash 2 Allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to confirm your choice.

  • Page 91: Asus Spd Information

    UEFI BIOS Utility - Advanced Mode Exit Ai Tweaker Main Advanced Monitor Boot Tool Back Tool\ ASUS SPD Information > DIMM Slot number DIMM Slot # Slot 2 Manufacturer Micron Module Size 2048 MBytes Maximum Bandwidth 1333 Mhz Part Number...

  • Page 92: Asus O.c. Profile

    Exit Ai Tweaker Main Advanced Monitor Boot Tool Back Tool\ ASUS O.C. Profile > O.C. Profile Configuration Save BIOS settings to Profile Setup Profile1 Status : Not Installed Setup Profile2 Status : Not Installed Setup Profile3 Status : Not Installed...

  • Page 93: Exit Menu

    Load Optimized Defaults Save Changes & Reset Discard Changes & Exit ASUS EZ Mode Launch EFI Shell from filesystem device Load Optimized Defaults This option allows you to load the default values for each of the parameters on the Setup menus.

  • Page 94: Updating Bios

    BIOS in the future. Copy the original motherboard BIOS using the ASUS Update or BIOS Updater utilities. 3.10.1 ASUS Update utility The ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows environment. The ASUS Update utility allows you to: ®...
  • Page 95 To update the BIOS through the Internet: From the ASUS Update screen, select Update BIOS from Internet, and then click Next. Select the ASUS FTP site nearest you to avoid network traffic. If you want to enable the BIOS downgradable function and auto...
  • Page 96 The screenshots in this section are for reference only. The actual BIOS information vary by models. • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. 3-32 Chapter 3: BIOS setup...

  • Page 97: Asus Ez Flash 2 Utility

    3.10.2 ASUS EZ Flash 2 utility The ASUS EZ Flash 2 feature allows you to update the BIOS without having to use a bootable floppy disk or an OS-based utility. Before you start using this utility, download the latest BIOS from the ASUS website at www.asus.com.
  • Page 98 • This function can support devices such as a USB flash disk with FAT 32/16 format and single partition only. • DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu.

  • Page 99: Asus Bios Updater

    3.10.3 ASUS BIOS Updater The ASUS BIOS Updater allows you to update BIOS in DOS environment. This utility also allows you to copy the current BIOS file that you can use as a backup when the BIOS fails or gets corrupted during the updating process.
  • Page 100 Backing up the current BIOS To backup the current BIOS file using the BIOS Updater Ensure that the USB flash drive is not write-protected and has enough free space to save the file. At the FreeDOS prompt, type bupdater /o[filename] and press <Enter>. D:\>bupdater /oOLDBIOS1.rom Filename Extension The [filename] is any user-assigned filename with no more than eight alphanumeric...
  • Page 101 Select the Load Optimized Defaults item under the Exit BIOS menu. See Chaper 3 of your motherboard user manual for details. • Ensure to connect all SATA hard disk drives after updating the BIOS file if you have disconnected them. ASUS M5A99X EVO 3-37...
  • Page 102 3-38 Chapter 3: BIOS setup...

  • Page 103: Chapter 4: Software Support

    The contents of the support DVD are subject to change at any time without notice. Visit the ASUS website at www.asus.com for updates. 4.2.1 Running the support DVD Place the support DVD into the optical drive.

  • Page 104: Obtaining The Software Manuals

    The software manual files are in Portable Document Format (PDF). Install the Adobe ® Acrobat Reader from the Utilities menu before opening the files. ® Click the Manual tab. Click ASUS Motherboard Utility Guide from the manual list on the left. The Manual folder of the support DVD appears. Double-click the folder of your selected software.

  • Page 105: Software Information

    4.3.1 AI Suite II AI Suite II is an all-in-one interface that integrates several ASUS utilities and allows users to launch and operate these utilities simultaneously. Installing AI Suite II To install AI Suite II on your computer Place the support DVD to the optical drive.

  • Page 106: Digi+ Vrm

    4.3.2 DIGI+ VRM ASUS DIGI+ VRM allows you to adjust VRM voltage and frequency modulation to enhance reliability and stability. It also provides the highest power efficiency, generating less heat to longer component lifespan and minimize power loss. After installing AI Suite II from the motherboard support DVD, launch DIGI+ VRM by clicking Tool >...

  • Page 107: Turbov Evo

    4.3.3 TurboV EVO ASUS TurboV EVO introduces TurboV that allows you to manually adjust the CPU frequency and related voltages as well as Auto Tuning function that offers automatic and easy overlocking and system level up. After installing AI Suite II from the motherboard support After installing AI Suite II from the motherboard support DVD, launch TurboV EVO by clicking Tool >...

  • Page 108: Cpu Ratio

    Using Advanced Mode Click More Settings, and then click the Advanced Mode tab to adjust the advanced voltage settings. Advanced mode Voltage Target values Adjustment bars Undoes all changes Current values without applying Applies all changes Click to restore immediately all start-up settings CPU Ratio...

  • Page 109: Auto Tuning

    Auto Tuning ASUS TurboV EVO includes two auto tuning modes, providing the most flexible auto-tuning options. • The overclocking result varies with the CPU model and the system configuration. • To prevent overheating from damaging the motherboard, a better thermal environment is strongly recommended.
  • Page 110 TurboV automatically overclocks the CPU and memory and restarts the system. After re-entering Windows, a message appears indicating the current overclocking result. To keep the result, click Stop. If you did not click Stop in the previous step, TurboV automatically starts further system overclocking and stability test.

  • Page 111: Epu

    Select From EPU Installation to show the CO2 that has been reduced since you *• installed EPU. Select From the Last Reset to show the total CO2 that has been reduced since you *• click the Clear button ASUS M5A99X EVO...

  • Page 112: Fan Xpert

    4.3.5 FAN Xpert Fan Xpert intelligently allows you to adjust both the CPU and chassis fan speeds according to different ambient temperatures caused by different climate conditions in different geographic regions and your PC’s system loading. The built-in variety of useful profiles offer flexible controls of fan speed to achieve a quiet and cool environment.

  • Page 113: Probe Ii

    The Preference tab allows you to customize the time interval of sensor alerts, or change the temperature unit. Saves your configuration Loads your saved Loads the default Applies your threshold values configuration changes for each sensor ASUS M5A99X EVO 4-11...

  • Page 114: Sensor Recorder

    4.3.7 Sensor Recorder Sensor Recorder allows you to monitor the changes in the system voltage, temperature, and fan speed, as well as recording the changes. Launching Sensor Recorder After installing AI Suite II from the motherboard support DVD, click Tool > Sensor Recorder on the AI Suite II main menu bar to launch Sensor Recorder.

  • Page 115: Ai Charger

    * Check your USB device manufacturer if it fully supports the BC 1.1 function. • ** The actual charging speed may vary with your USB device’s conditions. • Ensure to remove and reconnect your USB device after enabling or disabling Ai Charger+ to ensure normal charging function. ASUS M5A99X EVO 4-13...

  • Page 116: Monitor

    4.3.9 Monitor The Monitor section includes the Sensor and CPU Frequency panels. Sensor The Sensor panel displays the current value of a system sensor such as fan rotation, CPU displays the current value of a system sensor such as fan rotation, CPU temperature, and voltages.

  • Page 117: System Information

    Click the CPU tab to see the details on • the processor and the Cache. Click the SPD tab and then select • the memory slot to see the details on the memory module installed on the corresponding slot. ASUS M5A99X EVO 4-15...

  • Page 118: Audio Configurations

    Realtek HD Audio Manager for Windows XP Exit button Configuration options Minimize button Control settings window Information button Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. 4-16 Chapter 4: Software support...

  • Page 119: Raid Configurations

    With the RAID 10 configuration you get all the benefits of both RAID 0 and RAID 1 configurations. Use four new hard disk drives or use an existing drive and three new drives for this setup. ASUS M5A99X EVO 4-17...

  • Page 120: Installing Serial Ata Hard Disks

    4.4.2 Installing Serial ATA hard disks The motherboard supports Serial ATA hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array. To install the SATA hard disks for a RAID configuration: Install the SATA hard disks into the drive bays.

  • Page 121: Amd ® Option Rom Utility

    The RAID BIOS setup screens shown in this section are for reference only, and may not exactly match the items on your screen. To create a RAID volume using more than four hard disk drives, ensure that the SATA connectors 5/6 are set to [RAID] mode. ASUS M5A99X EVO 4-19...

  • Page 122: Creating A Raid Volume

    Creating a RAID volume To create a RAID volume: In the Main Menu, press <2> to enter the LD View / LD Define Menu function. Press <Ctrl> + <C>, and the following screen appears. Option ROM Utility (c) 2009 Advanced Micro Devices, Inc. [ LD Define Menu ] LD No LD Name...

  • Page 123: Deleting A Raid Configuration

    LD Name RAID Mode Capacity(GB) xxxxx RAID 0 157.99 Strip Block 64 KB Cache Mode WriteThru [ Drives Assignments ] Port:ID Drive Model Capabilities Capacity(GB) 01:00 xxxxxxxxx xxxxxxx xxxxxx 02:00 xxxxxxxxx xxxxxxx xxxxxx Any Key To Continue..ASUS M5A99X EVO 4-21...

  • Page 124: Creating A Raid Driver Disk

    Creating a RAID driver disk A floppy disk with the RAID driver is required when installing a Windows operating system ® on a hard disk drive that is included in a RAID set. The motherboard does not provide a floppy drive connector. You have to use a •...

  • Page 125: Installing The Raid Driver During Windows ® Os Installation

    Follow the succeeding screen instructions to complete the installation. Before loading the RAID driver from a USB flash drive, you have to use another computer to copy the RAID driver from the support DVD to the USB flash drive. ASUS M5A99X EVO 4-23...

  • Page 126: Using A Usb Floppy Disk Drive

    4.5.4 Using a USB floppy disk drive Due to OS limitation, Windows XP may not recognize the USB floppy disk drive when you ® install the RAID driver from a floppy disk during the OS installation. To solve this issue, add the USB floppy disk drive’s Vendor ID (VID) and Product ID (PID) to the floppy disk containing the RAID driver.
  • Page 127 = “USB\VID_xxxx&PID_xxxx”, “usbstor” [HardwareIds.scsi.iaAHCI_DesktopWorkstationServer] id= “PCI\VEN_8086&DEV_1C02&CC_0106”,”iaStor” id= “USB\VID_03EE&PID_6901”, “usbstor” [HardwareIds.scsi.iaStor_DesktopWorkstationServer] id= “PCI\VEN_8086&DEV_2822&CC_0104”,”iaStor” id= “USB\VID_03EE&PID_6901”, “usbstor” Add the same line to both sections. The VID and PID vary with different vendors. Save and exit the file. ASUS M5A99X EVO 4-25...
  • Page 128 4-26 Chapter 4: Software support...

  • Page 129: Chapter 5: Multiple Gpu Technology Support

    For Windows XP, go to Control Panel > Add/Remove Programs. For Windows Vista, go to Control Panel > Programs and Features. Select your current graphics card drivers. For Windows XP, select Add/Remove. For Windows Vista, select Uninstall. Turn off your computer. ASUS M5A99X EVO...

  • Page 130: Installing Two Crossfirex™ Graphics Cards

    5.1.3 Installing two CrossFireX™ graphics cards The following pictures are for reference only. The graphics cards and the motherboard layout may vary with models, but the installation steps remain the same. Prepare two CrossFireX-ready graphics cards. Insert the two graphics card into the PCIEX16 slots.

  • Page 131: Installing The Device Drivers

    In the Catalyst Control Center window, click Graphics Settings > CrossFireX > Configure. From the Graphics Adapter list, select the graphics card to act as the display GPU. Select Enable CrossFireX. Click Apply, and then click OK to exit the window. ASUS M5A99X EVO...

  • Page 132: Nvidia ® Sli™ Technology

    NVIDIA SLI™ technology ® The motherboard supports the NVIDIA SLI™ (Scalable Link Interface) technology that ® allows you to install multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in this section. 5.2.1 Requirements • In SLI mode, you should have two identical SLI-ready graphics cards that are NVIDIA ®...

  • Page 133: Installing The Device Drivers

    You can launch the NVIDIA Control Panel by the following two methods. Right click on the empty space of the Windows desktop ® and select NVIDIA Control Panel. The NVIDIA Control Panel window appears (See Step B5). ASUS M5A99X EVO...
  • Page 134 If you cannot see the NVIDIA Control Panel item in step (A), select Personalize. From the Personalization window, select Display Settings. From the Display Settings dialog box, click Advanced Settings. Chapter 5: Multiple GPU technology support...
  • Page 135 Start the NVIDIA Control Panel. The NVIDIA Control Panel window appears. Enabling SLI settings From the NVIDIA Control Panel window, select Set SLI Configuration. Click Enable SLI and set the display for viewing SLI rendered content. When done, click Apply. ASUS M5A99X EVO...
  • Page 136 Chapter 5: Multiple GPU technology support...

  • Page 137: Asus Contact Information

    +1-812-282-3777 +1-510-608-4555 Web site usa.asus.com Technical Support Telephone +1-812-282-2787 Support fax +1-812-284-0883 Online support support.asus.com ASUS COMPUTER GmbH (Germany and Austria) Address Harkort Str. 21-23, D-40880 Ratingen, Germany +49-2102-959911 Web site www.asus.de Online contact www.asus.de/sales Technical Support Telephone +49-1805-010923* Support Fax...

Table of Contents

Save PDF