Removing An Optical Drive - HP dx7500 - Microtower PC Hardware Reference Manual

Microtower model business pc

Hide thumbs Also See for dx7500 - Microtower PC:

Table of Contents

Table 2-3

System Board Drive Connections (continued)

No.

System Board Connector

SATA0

Diskette Drive

Removing an Optical Drive

CAUTION:

computer.

To remove an optical drive:

Remove/disengage any security devices that prohibit opening the computer.

Remove all removable media, such as diskettes or compact discs, from the computer.

Turn off the computer properly through the operating system, then turn off any external devices.

Disconnect the power cord from the power outlet and disconnect any external devices.

CAUTION:

long as the system is plugged into an active AC outlet. You must disconnect the power cord to

avoid damage to the internal components of the computer.

Remove the access panel and front bezel.

Disconnect the power cable (1) and data cable (2) from the rear of the optical drive.

Figure 2-18

Chapter 2 Hardware Upgrades

All removable media should be taken out of a drive before removing the drive from the

Regardless of the power-on state, voltage is always present on the system board as

Disconnecting the Power and Data Cables

System Board Label

SATA0

FLOPPY

Color

dark blue

black

ENWW

Table of Contents

Compaq dx7500