Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Fujitsu FPCR33871
Summary of Contents for Fujitsu FPCR33871
- Page 1 System Operating Manual LIFEBOOK A530 LIFEBOOK AH530...
- Page 2 For automatic driver updates, go to: "http://support.ts.fujitsu.com/com/support/index.html" Should you have any technical questions, please contact: • our Hotline/Service Desk (see Service Desk list or visit: "http://ts.fujitsu.com/support/servicedesk.html") • Your sales partner • Your sales office We hope you really enjoy using your new Fujitsu system.
- Page 4 Brand names may be protected trademarks of the respective manufacturer and/or protected by copyright. Use of these by third parties for their own purposes may constitute an infringement of the holders’ rights. Further information can be found at "http://ts.fujitsu.com/terms_of_use.html" Order No. Fujitsu Technology Solutions GmbH: A26391-K257-Z320-1-7619, edition 1...
- Page 5 LIFEBOOK A530 LIFEBOOK AH530 Operating Manual Innovative technology Ports and controls Important notes First-time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility Troubleshooting and tips Technical data Manufacturer’s notes Index...
- Page 6 All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. Copyright © Fujitsu Technology Solutions GmbH 2010 All rights reserved, including rights of translation, reproduction by printing, copying or similar methods, in part or in whole.
-
Page 7: Table Of Contents
Removing the memory card ............37 Fujitsu Technology Solutions... - Page 8 Load Setup Defaults – Copy Standard Entries ......... 63 Fujitsu Technology Solutions...
- Page 9 Index ................. . 80 Fujitsu Technology Solutions...
- Page 10 Contents Fujitsu Technology Solutions...
-
Page 11: Innovative Technology
The Windows drivers for your device can be found on our Internet site. The factory installation of your device does not support any other operating system. Fujitsu Technology Solutions accepts no liability whatsoever if any other operating system is used. -
Page 12: Notational Conventions
Names of CDs, DVDs and titles or designations of other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety" Manual indicates a key on the keyboard, e.g: indicates terms and texts that are emphasised or highlighted, e.g.: Do This font not switch off the device Fujitsu Technology Solutions... -
Page 13: Ports And Controls
7 = Touchpad buttons 2 = Keyboard 8 = Memory card slot 3 = ON/OFF switch 9 = Microphone jack 4 = Loudspeakers 10 = Headphone port 5 = Separate numeric keypad 11 = Status indicators 6 = Touchpad Fujitsu Technology Solutions... - Page 14 2 = LAN port 5 = USB port 3 = HDMI port 6 = USB port Right-hand side 1 = USB port 3 = Optical drive 2 = Kensington Lock 4 = DC input connector (DC IN) Fujitsu Technology Solutions...
- Page 15 Ports and controls Underside 1 = Memory service compartment 4 = Battery compartment with SIM card slot under the battery 2 = Hard disk service compartment 3 = Kensington Lock Fujitsu Technology Solutions...
-
Page 16: Important Notes
(e.g. petrol station, paintshops), as the transmitted radio waves can cause an explosion or a fire. For information on how to switch radio components on and off, see chapter "Switching the wireless components on and off", Page Fujitsu Technology Solutions... -
Page 17: Energy Saving
► Enquire with the corresponding government office of the country you will be travelling in as to whether you may operate the radio component integrated in your notebook there (see also "CE marking", Page 74). Fujitsu Technology Solutions... -
Page 18: Notebook: Transporting
The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth which has been moistened in mild domestic detergent and then carefully wrung out. To clean the keyboard and the touchpad, if available, you can use disinfectant wipes. Ensure that no liquid enters the device. Fujitsu Technology Solutions... -
Page 19: First-Time Setup Of Your Device
► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need the packaging in the future, if you need to transport your device. Fujitsu Technology Solutions... -
Page 20: Selecting A Location
► Connect the power cable (1) to the mains adapter. ► Plug the mains cable (2) into a mains outlet. ► Connect the mains adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu Technology Solutions... -
Page 21: Switching On The Device For The First Time
► During installation, follow the instructions on screen. If a Windows operating system is installed on your device, you will find more information on the system and drivers, help programmes, updates, manuals etc. on the device or on the Internet at "http://ts.fujitsu.com/support". Fujitsu Technology Solutions... -
Page 22: Working With The Notebook
Please refer to the notes in "Important notes", Page Status indicators Statusindicators The status indicators provide information about the status of the power supply, the drives and the keyboard functions. Fujitsu Technology Solutions... - Page 23 The indicator is lit: The Caps Lock key has been pressed. All the characters you type will appear in upper case. In the case of overlay keys, the character printed on the upper left of the key will appear when that key is pressed. Fujitsu Technology Solutions...
-
Page 24: Switching On The Notebook
The key markings are especially prone to wear. The key markings are liable to wear away over the life of the notebook. The keyboard has been designed to provide all the functions of an enhanced keyboard. Some enhanced keyboard functions are mapped with key combinations. Fujitsu Technology Solutions... -
Page 25: Key Description
The Tab key moves the cursor to the next tab stop. Tabkey Enter key (return) The Enter key terminates a command line. The command you have entered is executed when you press this key. Enterkey Return Enter Linefeed Fujitsu Technology Solutions... -
Page 26: Key Description
The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right. Cursor keys Cursor controlkeys Start key The Start key opens the Windows Start menu. Startkey Menu key The Menu key invokes the menu for the marked item. Fujitsu Technology Solutions... -
Page 27: Virtual Numeric Keypad
The keyboard layout shown below may differ from your actual device. 1 = Valid characters when the 2 = Valid characters when the key is not activated is activated Further information about the status indicators can be found in chapter "Status indicators", Page Fujitsu Technology Solutions... -
Page 28: Separate Numeric Keypad (Device-Dependent)
This key combination switches the touchpad and the touchpad buttons on or off. Fn+F4 Touchpad Touchpadbuttons Touchpad Switching the wireless components on / off This key combination switches the wireless components off or on. Fn+F5 Wirelesscomponents Wirelesscomponents Fujitsu Technology Solutions... - Page 29 If the device is locked, the window for entering a password will be opened. Ctrl+Alt+Del Back tab This key combination moves the cursor back to the previous tab stop. Shift+Tab Backtab Key combinations using the Windows keys are detailed in the manual for your operating system. Fujitsu Technology Solutions...
-
Page 30: Country And Keyboard Settings
► Move your finger on the touchpad. Touchpad The pointer will move. Selecting an item ► Move the pointer to the item you wish to select. Touchpad ► Tap the touchpad once or press the left button once. The item is selected. Fujitsu Technology Solutions... -
Page 31: Executing Commands
► Press and hold the left button and drag the item to the desired position with the finger on the touchpad. The item will be moved. Switching the Touchpad on and off You can switch the Touchpad on and off using a key combination, "Key combinations", Page Fujitsu Technology Solutions... -
Page 32: Lcd Screen
LCDscreen Notes High-quality TFT displays are installed in notebooks from Fujitsu Technology Solutions GmbH. For technical reasons, TFT monitors are manufactured for a specific resolution. An optimal, clear picture can only be ensured with the correct resolution intended for the relevant TFT monitor. A monitor resolution which differs from the specification can result in an unclear picture. -
Page 33: Webcam
Further information on use of the webcam and additional settings can be found in the help function of the program which uses the webcam. If you wish to carry out a function test with your webcam, you can use the corresponding test software available at "http://ts.fujitsu.com/support/". Fujitsu Technology Solutions... -
Page 34: Rechargeable Battery
If you do not use the batteries for long periods, remove them from the notebook. Never store the batteries in the device. Removing and installing the battery Only use rechargeable batteries approved by Fujitsu Technology Solutions for your notebook. Never use force when fitting or removing a battery. -
Page 35: Removing The Battery
► Slide the release button in the direction of the arrow (1) and hold it in place. ► Slide the release button in direction of the arrow (2). ► Remove the battery from the battery compartment (3). Fujitsu Technology Solutions... -
Page 36: Optical Drive
Avoid storing a data carrier in areas subject to high temperatures or humidity. You may use both 8-cm and 12-cm data carriers in the optical drive. When using a data carrier of lesser quality, vibrations and reading errors may occur. Fujitsu Technology Solutions... -
Page 37: Cd/Dvd Indicator
► Place the data carrier in the drive tray with the printed side facing upwards. ► Remove a data carrier that has been inserted. ► Push in the drive tray until you feel it lock into place. Fujitsu Technology Solutions... -
Page 38: Manual Removal (Emergency Removal)
► Switch your notebook off. ► Push a pen or a piece of wire (such as a paperclip) firmly into the opening (1). The drive tray is ejected. You can now pull the drive tray (2) out of the drive. Fujitsu Technology Solutions... -
Page 39: Using The Power-Management Features
If you do not intend to use your notebook for a long period of time: ► Exit power saving mode if necessary via the mouse or keyboard or by switching on the notebook. ► Close all opened programs and completely shut down the notebook. Fujitsu Technology Solutions... -
Page 40: Memory Cards
The label should be facing upward. Do not apply excessive force, as otherwise the delicate contact surfaces could be damaged. Memory card Depending on the particular type used, the memory card may protrude slightly from the slot. Fujitsu Technology Solutions... -
Page 41: Removing The Memory Card
Wait for the dialogue box which tells you that it is now safe to remove the memory card. ► On devices with card locking: Press on the storage card (1). Memory card The storage card is released and can now be removed. ► Pull the storage card out of the slot (2). Fujitsu Technology Solutions... -
Page 42: Expresscards
► Gently push the card into the slot until you feel it click into place. Do not use any force. Depending on the particular type used, the card may protrude slightly from the slot. Please see the documentation relating to the card for driver installation instructions. Fujitsu Technology Solutions... -
Page 43: Removing The Card
If you attach an external microphone, the built-in microphone is disabled. When you connect headphones or external speakers, the built-in speakers are disabled. Information on connecting headphones and a microphone can be found "Connecting external devices", Page Fujitsu Technology Solutions... -
Page 44: Sim Card
► Press on the edge of the SIM card so that it jumps up slightly out of the slot. ► Pull the SIM card out of the slot in the direction of the arrow (1). ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu Technology Solutions... -
Page 45: Wireless Lan / Bluetooth / Umts
Working with the notebook Wireless LAN / Bluetooth / UMTS The installation of radio components not approved by Fujitsu Technology Solutions will invalidate the certifications issued for this device. Switching the wireless components on and off ► Press the key combination to start the WirelessSelector. -
Page 46: Ethernet And Lan
(2). Your network administrator can help you to configure and use the LAN connections. The network cable is not included in the delivery scope. This type of cable can be obtained from a specialist dealer. Fujitsu Technology Solutions... -
Page 47: Security Functions
Password protection Your password can be up to eight characters long and contain letters and numbers. No distinction is made between uppercase and lowercase. Fujitsu Technology Solutions... -
Page 48: Protecting Bios Setup Utility (Supervisor And User Password)
You can only change the supervisor password when you have logged into the BIOS Setup Utility with the supervisor password. Password Supervisorpassword User password ► Call the BIOS Setup Utility and go to the Security menu. ► When changing the password, proceed exactly as for password assignment. Fujitsu Technology Solutions... -
Page 49: Password Protection For Booting Of The Operating System
Passwordprotection: The had disk password prevents unauthorised access to the hard disk drives and is checked internally each time the system is booted. The condition for this is that you have assigned at least the supervisor password. Fujitsu Technology Solutions... -
Page 50: Activating Hard Disk Protection
► To cancel the password for the second hard disk (Drive1), go to the Drive1 area and select the field Set Master Password, then proceed in exactly the same way as for cancelling the password for the first hard disk (Drive0). Fujitsu Technology Solutions... -
Page 51: Connecting External Devices
Disconnecting devices from the notebook 1. Turn off your notebook and all external devices. 2. Unplug your notebook and all devices from the mains sockets. 3. Disconnect the cables for your external devices following the instructions. Devices Peripheraldevices Fujitsu Technology Solutions... -
Page 52: Connecting An External Monitor
You can also use a key combination to switch back and forth between the external monitor and the notebook’s LCD screen, see chapter "Key combinations", Page You can display the same picture on the external monitor and the notebook LCD screen simultaneously. Fujitsu Technology Solutions... -
Page 53: Hdmi Port
► Select Startsymbol – (Settings) – Control Panel – Hardware and Sound – Sound. ► Mark Realtek HDMI Output. ► Select Properties – Supported formats. ► Deactivate the settings DTS audio and Dolby digital. ► Confirm the settings with OK. Fujitsu Technology Solutions... -
Page 54: Connecting Usb Devices
► Left click on the icon to safely remove hardware, located in the taskbar. ► Select the device which you want to shut down and remove. ► Press the Enter key. Wait for the dialogue box which tells you that it is now safe to remove the device. Fujitsu Technology Solutions... -
Page 55: Connecting External Audio Devices
If you purchase a cable from a retailer, please note the following information: The headphone port on your notebook is a "3.5 mm jack socket". If you want to connect headphones or a speaker you will need a "3.5 mm jack plug". Fujitsu Technology Solutions... -
Page 56: Removing And Installing Components During Servicing
The equipment and tools you use must be free of static charges. • Remove the power plug from the mains supply before inserting or removing boards containing ESDs. • Always hold boards with ESDs by their edges. • Never touch pins or conductors on boards fitted with ESDs. Fujitsu Technology Solutions... -
Page 57: Preparing To Remove Components
Otherwise, there is a risk of suffering burns! As some components are exposed that are sensitive to static electricity, please take note of chapter "Notes on installing and removing boards and components", Page Fujitsu Technology Solutions... -
Page 58: Removing The Cover
Removing memory modules ► Carefully push the two mounting clips outwards (1). Memory expansion Memory module The memory module snaps upwards (2). ► Pull the memory module out of its slot in the direction of the arrow (3). Fujitsu Technology Solutions... -
Page 59: Installing A Memory Module
► Carefully push the memory module downwards until you feel it click into place (2). Securing the cover ► Place the cover into its installation position in the direction of the arrow (1). ► Secure the cover with the screws (2). Fujitsu Technology Solutions... -
Page 60: Removing And Installing The Hard Disk
Keep the screws in a safe place. If you are removing more than one component at the same time, store the screws for the individual components separately from each other. If you install the wrong screws, components may be damaged. ► Lift the cover off the notebook (2). Fujitsu Technology Solutions... -
Page 61: Removing A Hard Disk
If you install the wrong screws, components may be damaged. ► Use the pulling aid to pull the hard disk in the direction of the arrow (2) until the contacts disengage. ► Remove the hard disk from the hard disk compartment (3). Fujitsu Technology Solutions... -
Page 62: Installing A Hard Disk
If you install the wrong screws, components may be damaged. ► Place the hard disk into the hard disk compartment (1). ► Push the hard disk in the direction of the arrow (2) until the contacts engage. ► Fasten the screws (3). Fujitsu Technology Solutions... -
Page 63: Attaching The Cover
If you install the wrong screws, components may be damaged. ► Tighten the screw (2). ► Insert the battery (see Chapter "Inserting battery", Page 32). Fujitsu Technology Solutions... -
Page 64: Removing And Installing The Optical Drive
Removing and installing the optical drive Removing the optical drive ► Prepare for removal, see "Preparing to remove components", Page Harddisk ► Remove the screws (1). The drive is released. ► Pull the drive out of the drive bay (2). Fujitsu Technology Solutions... -
Page 65: Installing The Optical Drive
► Install the battery again (see "Inserting battery", Page 32). ► Turn the notebook the right way up again and place it on a flat surface. ► Reconnect the cables that you disconnected before. Fujitsu Technology Solutions... -
Page 66: Settings In Bios Setup Utility
► Select the option you want to change with the cursor keys ↑ ↓ ► Press the Enter key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu Technology Solutions... -
Page 67: Exiting Bios Setup Utility
► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save Changes and Power Off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu Technology Solutions... -
Page 68: Troubleshooting And Tips
PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu Technology Solutions may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://ts.fujitsu.com/support/downloads.html"... -
Page 69: Help If Problems Occur
The SystemDiagnostics program is already installed on devices which were delivered with a Windows operating system. ► To start the SystemDiagnostics program, click on Startsymbol - Program - Fujitsu - SystemDiagnostics. ► If a problem is found during a test run, the SystemDiagnostics program outputs a code (e.g. -
Page 70: The Notebook's Date Or Time Is Incorrect
"Key combinations", Page The LCD screen is difficult to read LCDscreen LCDscreen Cause Troubleshooting Reflected glare ► Turn the notebook or alter the tilt of the LCD screen. ► Increase the brightness of the screen. Fujitsu Technology Solutions... -
Page 71: The External Monitor Remains Blank
Change the following setting: ► Set the screen resolution: Set the screen resolution as described in the documentation for your operating system. ► Select monitor: Select monitor 1 or 2 as described in the documentation for your operating system. Fujitsu Technology Solutions... -
Page 72: The Notebook Cannot Be Started
(by restarting the operating system or switching the device off and back on again). The battery is dead. ► Charge the battery. ► Insert a charged battery. ► Connect the mains adapter to the notebook. Fujitsu Technology Solutions... -
Page 73: The Printer Does Not Print
This section describes the error messages generated by the BIOS Setup. Error messages displayed by the operating system or programmes are described in the relevant documentation. If the error message appears repeatedly, despite troubleshooting measures, please contact the place of purchase or our customer service centre. Fujitsu Technology Solutions... - Page 74 Shadow RAM failed at offset: xxxx Failing ► Contact your sales outlet or our customer Bits: zzzz service centre. System battery is dead - Replace and run SETUP ► Contact your sales outlet or our customer service centre. Fujitsu Technology Solutions...
- Page 75 Troubleshooting and tips Error message/cause Resolution System cache error - Cache disabled ► Contact your sales outlet or our customer service centre. System timer error ► Contact your sales outlet or our customer service centre. Fujitsu Technology Solutions...
-
Page 76: Technical Data
Approx. 2.5 kg The data sheet for the device provides further technical data. You will find the data sheet on your device or on the Internet at "http://ts.fujitsu.com/support". Rechargeable battery You can find information on the batteries used in your device on the Internet at "http://ts.fujitsu.com/support". -
Page 77: Manufacturer's Notes
The "Declarations of Conformity" concerning the device can be found at our Internet address: "http://ts.fujitsu.com". Fujitsu Technology Solutions hereby declares that your device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Fujitsu Technology Solutions... -
Page 78: Ce Marking
Federal Communications Commission (FCC) of the USA. Although it is not explicitly forbidden to travel in the US trading area carrying this device, to avoid trouble at customs clearance, Fujitsu Technology Solutions GmbH recommends not to bring this device into the US trading area. - Page 79 Places where telephones are specifically installed to alert emergency authorities such as fire, police or medical assistance personnel. • Hospital rooms, residential health care facilities, convalescent homes and prisons. • Hotel, motel or apartment lobbies. • Stores where telephones are used by patrons to order merchandise. Fujitsu Technology Solutions...
-
Page 80: Doc (Industry Canada) Notices
Repairs to telecommunication equipment should be made by a Canadian authorised maintenance facility. Any repairs or alterations not expressly approved by Fujitsu or any equipment failures may give the telecommunication company cause to request the user to disconnect the equipment from the telephone line. -
Page 81: Fcc Regulatory Information For Notebooks With Radio Device
Les réparations de l’équipement de télécommunications doivent être effectuées par un service de maintenance agréé au Canada. Toute réparation ou modification, qui n’est pas expressément approuvée par Fujitsu, ou toute défaillance de l’équipement peut entraîner la compagnie de télécommunications à exiger que l’utilisateur déconnecte l’équipement de la ligne téléphonique. - Page 82 In cases in which the policy regarding use of radio devices in specific environments is not clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain authorization to use these devices prior to operating the equipment. Regulatory Information/Disclaimers Fujitsu Technology Solutions...
- Page 83 (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modifications not expressly authorised by Fujitsu Technology Solutions may invalidate the user’s right to operate this equipment. Fujitsu Technology Solutions...
-
Page 84: Index
CD/DVD indicator 27 First-time setup CD/DVD: Fn key 16 manual emergency removal 28 Fn+F10 19 CE marking 68 Fn+F3 18 Charging capacity, battery 24 Fn+F4 18 Cleaning 8 Fn+F5 18 Components Fn+F6 19 installing / removing 46 Fujitsu Technology Solutions... - Page 85 Safety 6 Life, battery 24 transport 7 Line feed 15 Num Lock Loudspeakers 33 indicator 13, 17–18 switch off 18 Numeric keypad 14 switch on 18 see Separate numeric keypad 18 see Virtual numeric keypad 17 Main memory Fujitsu Technology Solutions...
- Page 86 18 Screen brightness Touchpad buttons 18 decrease 19 Transport increase 19 Transport damage 9 Screen port Transportation 7–8 see VGA connection socket 42 Travel, notebook 7 Security functions 37 Troubleshooting 58 Selecting a location 10 Fujitsu Technology Solutions...
- Page 87 Using a Kensington Lock 37 switch on 18 Wireless LAN Switching the module off 35 VGA connection socket 42 Switching the module on 35 Virtual numeric keypad 17 Wireless LAN: Volume safety notes 6 decrease 19 increase 19 Fujitsu Technology Solutions...