Table of Contents
Advertisement
Switching Your Television On and Off
The mains lead is attached to the rear of your television.
1
Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2
Press the "
" button (On/Off) on the front of the television.
Result:
The Standby indicator on the front of the television
lights up.
3
Press the POWER (
television on.
Result:
The programme that you were watching last is re-
selected automatically.
If you have not yet stored any channels, No clear picture
appears. Refer to "Storing Channels Automatically" on page
13 or "Storing Channels Manually" on page 14.
4
To switch your television off, press the "
again.
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce:
Power consumption
Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1
Press the POWER (
Result:
The screen is turned off and the Standby indicator on
the front of the television lights up in red.
2
To switch the television back on, simply press the POWER (
button again.
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the "
button (On/Off) on the front of the television. It is best to
unplug the set from the mains and aerial.
) button on the remote control to switch the
" button (On/Off)
) button on the remote control.
)
"
ENG
9
Advertisement
Table of Contents
