Related Manuals for Haier HWM-13.0/S
Summary of Contents for Haier HWM-13.0/S
- Page 1 Twin-tub Washing Machine with Pump User's manual This manual is for HWM-13.0/S Please read this manual carefully before using. 003080 Retain it for future reference.
-
Page 2: Table Of Contents
Contents Names of the parts Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Disposal after washing Trouble-Shooting *Answer to question Packing list Specification... -
Page 3: Names Of The Parts
Names of the parts Buzzer Water-filling entrance Outer cover of the spin tub Water inlet selector handle Inner cover of the spin tub Wash selector Spin timer Wash timer Spin tub frame Control panel Spin tub Overflow filter Quick water-filling entrance Cabinet Drain hose surpport Water level adjusting lever... -
Page 4: Safety Precautions
Safety precautions When the machine is normally Please insert the power cord into using, please put the power plug special receptacle with rated vol- at the location easily to be insert- tage. Be sure to use single-phase ed and extracted by hand. Be sure three pins receptacle. - Page 5 Safety precautions Do not stretch hands into the working Do not decompose, repair or alter the machine. It is dangerous even if the machine by yourself. rotation is slow. Take special care of the children. Do not put any hot or heavy items Do not wash laundries with volatile ( such as the kettle with hot water ) materials (such as thinner, petrol etc.).
-
Page 6: Installation And Adjustment
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter After opening the package, please take out the lint filter from the document bag, install it to the overflow filter of the wash tub. -
Page 7: How To Change The Direction Of The Drain Hoses
How to change the direction of the drain hoses Figure 1 indicates the ex factory installation Side sectional view position of the drain hose. Drain hose Fixing hook fixing hook installation hole Extend the drain hose from the side of spin tub. Drain hose Pull outwards slightly... -
Page 8: Install The Water Inlet Hose; Select The Water Level
Install the water inlet hose; Select the water level Insert the water inlet hose into the water-filling entrance on the control pane directly.(pull it out to dismantle it) Water inlet hose Select water level according to the quantity of the laundries. Water inlet Set the water level adjusting lever to needed line. -
Page 9: Preparation Before Washing
Preparation before washing Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put the drain hose up to suitable position. -
Page 10: The Musts In Washing
The musts in washing The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity. -
Page 11: Washing Sequence
Washing sequence Water-filling selector handle Wash selector Overfilling sign (standard current, strong current) Water-filling entrance Spin timer Buzzer Wash timer (to set to below 1 minute, (To set to below 2 minute, (The buzzer will ring when first set to 2 minute then first set to 6 minute then the washing finishes) turn it back. - Page 12 Midway spinning 1.Put the laundries into the spin tub evenly and smoothly. 2.Spin (1) Put the gland in properly. Please put in the gland properly even if the laundries quantity is small. Push Gland Push Proper Proper The laundries No gland are slanting (2) Close the inner and outer cover of the spin tub.
-
Page 13: Rinse With Water-Filling
Rinsing Rinse with water-filling OVERFLOW 1.Put the laundries into the wash tub. Select suitable current according to the laundries. If you find water flo- wing out here, please twist the water tap to 2.Adjust the water level limit the water filling. Set the water level with water level adjusting lever according to the laundries quantity. - Page 14 Spinning 1. Put the laundries into the spin tub evenly and smoothly. Selection of the spin time Spin time Laundries (minutes) 2. Press the gland in the tub properly. Close the inner and outer cover of Bed sheet or About 4~5 blanket the spin tub.
-
Page 15: Disposal After Washing
Disposal after washing After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Cleaning the lint filter The lint filter must be used during washing. -
Page 16: Cleaning The Overflow Filter
Cleaning the overflow filter 2. Take off the corrugation pipe. Water level Dismantle the upper part of the adjusting lever corrugation pipe inside overflow filter ( as indicated in Corrugation Figure 1). Pipe 3. Cleaning the overflow filter Clean the lint around the filter and flush with tap water. -
Page 17: Trouble-Shooting Answer To Question
Trouble-shooting Answer to question If the laundries fall to the outer side of the spin tub If the laundries fall to the outer side of the spin tub, please take them out immediately. 1.Dismantle As indicated in the figure, push the point marked Spin tub frame with "... - Page 18 Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company.
-
Page 19: Packing List
Packing list Quantity Name One piece User's manual One piece Warranty card One piece Water inlet hose Two pieces Lint filter Water-filling jointer One piece One piece Gland One set Twin-tub washing machine Specification Water level/Water quantity (about) Maximum/55L Medium/46L Minimum/36L Injection pressure(Mpa) 0.02 0.2...